main
History Download
Ray Publish 0.1.0 7a6d8bc

TEN 8-2423

TRACO POWER · Power Modules · DIP, 32x20.3mm

TEN 8-2423 from TRACO POWER, in a DIP, 32x20.3mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 Remote On/Off input Voltage-controlled remote: On at 3.5 to 12 VDC or open circuit, Off at 0 to 1.2 VDC or short circuit, referenced to -Vin.
2 -Vin (GND) power_in Negative input supply connection (GND) for the 18 to 36 VDC input range.
3 -Vin (GND) power_in Negative input supply connection (GND), duplicated on pin 2 for the 18 to 36 VDC input range.
9 Common passive Common output return for the dual-output variant; not connected on single-output models.
11 -Vout power_out Negative output voltage (-15 VDC, 267 mA max. for this variant).
14 +Vout power_out Positive output voltage (+15 VDC, 267 mA max. for this variant).
16 Common passive Common output return for the dual-output variant; the -Vout pin on single-output models.
22 +Vin (Vcc) power_in Positive input supply connection for the 18 to 36 VDC (24 VDC nominal) input range.
23 +Vin (Vcc) power_in Positive input supply connection, duplicated on pin 22 for the 18 to 36 VDC (24 VDC nominal) input range.

Key specifications

Parameter Value
Manufacturer TRACO POWER
Package DIP, 32x20.3mm
Category Power Modules
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 18 36 VDC 24 Vin models (24 VDC nom.) 1
Surge voltage 50 VDC 24 Vin models, 100 ms max. 2
Voltage set accuracy -1 1 % 2
Regulation input variation (Vmin-Vmax) 0.2 % dual output models 2
Regulation load variation (0-100%) 1 % dual output models, Output 1 2
Cross regulation 5 % dual output models, 25% / 100% asym. load 2
Temperature coefficient -0.02 0.02 %/K 2
Capacitive load (dual output) 100 µF 15 / -15 Vout models, Output 1 (pair printed as 100 / 100 µF max.) 2
Input current at full load 400 mA 24 Vin models: 15 / -15 Vout model 2
Input current at no load 15 mA 24 Vin models 2
Efficiency 85 % TEN 8-2423, 24 Vin, +15 / -15 VDC output 1
Output current per output Imax 267 mA +15 VDC and -15 VDC outputs 1
Ripple and noise 50 mVp-p 20 MHz bandwidth 2
Output current limitation 150 % of Iout max. 3
Transient response peak variation 225 450 mV 25% load step, other models (not 3.3 / 5 Vout) 3
Response time 200 µs 25% load step 3
Start-up time 700 ms Power On 2
Start-up time 5 ms Remote On 2
Remote on voltage 3.5 12 VDC On: 3.5 to 12 VDC or open circuit; refers to Remote and -Vin pin 3
Remote off voltage 0 1.2 VDC Off: 0 to 1.2 VDC or short circuit; refers to Remote and -Vin pin 3
Off idle input current 2.5 mA 3
Remote pin input current -0.5 0.5 mA 3
Isolation capacitance 300 pF Input to output, 100 kHz, 1 V 4
Switching frequency 270 300 330 kHz PWM 3
Operating temperature -40 85 °C 3
Case temperature 100 °C 3
Storage temperature -55 125 °C 3
Relative humidity 95 % non condensing 3
Thermal impedance 20 K/W Case to ambient 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts Copper Pin Material Copper 4

CAD (Adom-generated)

  • Symbol: TEN 8-2423
  • Footprint: Adom_Gen:TRACO_POWER_TEN_8-24_de2d95
  • 3D model: generated to fit the land (STEP)
  • 3D model files: ten-8-2423-etched.step / ten-8-2423-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ten-8-2423.step / ten-8-2423.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TRACO POWER datasheet (5 pp, sha256 ea1ae7e65db4a407, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF