Generated by adom_assets · KiCad file format 20240108
TEN 8-2423
TRACO POWER · Power Modules · DIP, 32x20.3mm
TEN 8-2423 from TRACO POWER, in a DIP, 32x20.3mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Remote On/Off | input | Voltage-controlled remote: On at 3.5 to 12 VDC or open circuit, Off at 0 to 1.2 VDC or short circuit, referenced to -Vin. |
| 2 | -Vin (GND) | power_in | Negative input supply connection (GND) for the 18 to 36 VDC input range. |
| 3 | -Vin (GND) | power_in | Negative input supply connection (GND), duplicated on pin 2 for the 18 to 36 VDC input range. |
| 9 | Common | passive | Common output return for the dual-output variant; not connected on single-output models. |
| 11 | -Vout | power_out | Negative output voltage (-15 VDC, 267 mA max. for this variant). |
| 14 | +Vout | power_out | Positive output voltage (+15 VDC, 267 mA max. for this variant). |
| 16 | Common | passive | Common output return for the dual-output variant; the -Vout pin on single-output models. |
| 22 | +Vin (Vcc) | power_in | Positive input supply connection for the 18 to 36 VDC (24 VDC nominal) input range. |
| 23 | +Vin (Vcc) | power_in | Positive input supply connection, duplicated on pin 22 for the 18 to 36 VDC (24 VDC nominal) input range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TRACO POWER |
| Package | DIP, 32x20.3mm |
| Category | Power Modules |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 18 | 36 | VDC | 24 Vin models (24 VDC nom.) | 1 | |
| Surge voltage | 50 | VDC | 24 Vin models, 100 ms max. | 2 | |||
| Voltage set accuracy | -1 | 1 | % | 2 | |||
| Regulation input variation (Vmin-Vmax) | 0.2 | % | dual output models | 2 | |||
| Regulation load variation (0-100%) | 1 | % | dual output models, Output 1 | 2 | |||
| Cross regulation | 5 | % | dual output models, 25% / 100% asym. load | 2 | |||
| Temperature coefficient | -0.02 | 0.02 | %/K | 2 | |||
| Capacitive load (dual output) | 100 | µF | 15 / -15 Vout models, Output 1 (pair printed as 100 / 100 µF max.) | 2 | |||
| Input current at full load | 400 | mA | 24 Vin models: 15 / -15 Vout model | 2 | |||
| Input current at no load | 15 | mA | 24 Vin models | 2 | |||
| Efficiency | 85 | % | TEN 8-2423, 24 Vin, +15 / -15 VDC output | 1 | |||
| Output current per output | Imax | 267 | mA | +15 VDC and -15 VDC outputs | 1 | ||
| Ripple and noise | 50 | mVp-p | 20 MHz bandwidth | 2 | |||
| Output current limitation | 150 | % | of Iout max. | 3 | |||
| Transient response peak variation | 225 | 450 | mV | 25% load step, other models (not 3.3 / 5 Vout) | 3 | ||
| Response time | 200 | µs | 25% load step | 3 | |||
| Start-up time | 700 | ms | Power On | 2 | |||
| Start-up time | 5 | ms | Remote On | 2 | |||
| Remote on voltage | 3.5 | 12 | VDC | On: 3.5 to 12 VDC or open circuit; refers to Remote and -Vin pin | 3 | ||
| Remote off voltage | 0 | 1.2 | VDC | Off: 0 to 1.2 VDC or short circuit; refers to Remote and -Vin pin | 3 | ||
| Off idle input current | 2.5 | mA | 3 | ||||
| Remote pin input current | -0.5 | 0.5 | mA | 3 | |||
| Isolation capacitance | 300 | pF | Input to output, 100 kHz, 1 V | 4 | |||
| Switching frequency | 270 | 300 | 330 | kHz | PWM | 3 | |
| Operating temperature | -40 | 85 | °C | 3 | |||
| Case temperature | 100 | °C | 3 | ||||
| Storage temperature | -55 | 125 | °C | 3 | |||
| Relative humidity | 95 | % | non condensing | 3 | |||
| Thermal impedance | 20 | K/W | Case to ambient | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | Pin Material Copper | 4 |
CAD (Adom-generated)
- Symbol:
TEN 8-2423 - Footprint:
Adom_Gen:TRACO_POWER_TEN_8-24_de2d95 - 3D model: generated to fit the land (STEP)
- 3D model files:
ten-8-2423-etched.step/ten-8-2423-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ten-8-2423.step/ten-8-2423.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TRACO POWER datasheet (5 pp, sha256
ea1ae7e65db4a407, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.