main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tdc7200pw: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tdc7200pw: viewers · Ray
package.json tdc7200pw: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tdc7200pw: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tdc7200pw · Ray
tdc7200pw-etched.fit.json tdc7200pw: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tdc7200pw-etched.glb tdc7200pw: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tdc7200pw-etched.step tdc7200pw: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tdc7200pw.glb Publish 0.1.0 · Ray
tdc7200pw.kicad_mod Publish 0.1.0 · Ray
tdc7200pw.kicad_sym Publish 0.1.0 · Ray
tdc7200pw.lbr Publish 0.1.0 · Ray
tdc7200pw.step Publish 0.1.0 · Ray

TDC7200PW

Texas Instruments · ADCs/DACs - Special Purpose · TSSOP-14

TDC7200PW from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ENABLE input Enable signal to TDC; positive edge required after power-up to initialize all digital circuits.
2 TRIGG output Trigger output signal; generated after START_MEAS command to initiate measurement in analog front-end.
3 START input START pulse input marking measurement start; trigger edge selectable via START_EDGE configuration bit.
4 STOP input STOP pulse input for echo detection; up to 5 signals supported with selectable trigger edge via STOP_EDGE bit.
5 CLOCK input Reference clock input with frequency range 1 to 16 MHz used for internal time base calibration.
6 N.C. unconnected Not connected.
7 GND power_in Ground; provides circuit return and signal reference at 0 V.
8 INTB tri_state Interrupt output to MCU, active low open-drain; asserts on measurement completion or counter overflow conditions.
9 DOUT tri_state SPI data output driven during read transactions; enters high impedance state when not being read.
10 DIN input SPI data input; receives configuration and register access commands from master device.
11 CSB input SPI chip select bar, active low; must remain low throughout a complete SPI transaction.
12 SCLK input SPI clock input; supports frequencies up to 20 MHz per timing specifications.
13 VREG power_out LDO output terminal for internal analog circuits; requires 0.4 to 2.7 µF external ceramic decoupling capacitor.
14 VDD power_in Power supply input; operating voltage range 2.0 V to 3.6 V per specifications.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Data Acquisition
Pins 14

CAD (KiCad official)

  • Symbol: TDC7200PW
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: tdc7200pw-etched.step / tdc7200pw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tdc7200pw.step / tdc7200pw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 0a0accdd4231b23e, retrieved 2026-09-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF