← Commit history

Initial commit: component/tdc7200pw

Ray ·1eca378097 ·
2 files changed +242
README.mdadded+50
@@ -0,0 +1,50 @@+# TDC7200PW++**Texas Instruments** · ADCs/DACs - Special Purpose · TSSOP-14++TDC7200PW from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ENABLE | input | Enable signal to TDC; positive edge required after power-up to initialize all digital circuits. |+| 2 | TRIGG | output | Trigger output signal; generated after START_MEAS command to initiate measurement in analog front-end. |+| 3 | START | input | START pulse input marking measurement start; trigger edge selectable via START_EDGE configuration bit. |+| 4 | STOP | input | STOP pulse input for echo detection; up to 5 signals supported with selectable trigger edge via STOP_EDGE bit. |+| 5 | CLOCK | input | Reference clock input with frequency range 1 to 16 MHz used for internal time base calibration. |+| 6 | N.C. | unconnected | Not connected. |+| 7 | GND | power_in | Ground; provides circuit return and signal reference at 0 V. |+| 8 | INTB | tri_state | Interrupt output to MCU, active low open-drain; asserts on measurement completion or counter overflow conditions. |+| 9 | DOUT | tri_state | SPI data output driven during read transactions; enters high impedance state when not being read. |+| 10 | DIN | input | SPI data input; receives configuration and register access commands from master device. |+| 11 | CSB | input | SPI chip select bar, active low; must remain low throughout a complete SPI transaction. |+| 12 | SCLK | input | SPI clock input; supports frequencies up to 20 MHz per timing specifications. |+| 13 | VREG | power_out | LDO output terminal for internal analog circuits; requires 0.4 to 2.7 µF external ceramic decoupling capacitor. |+| 14 | VDD | power_in | Power supply input; operating voltage range 2.0 V to 3.6 V per specifications. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-14 |+| Category | Data Acquisition |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `TDC7200PW`+- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`+- 3D model: TSSOP-14 (KiCad packages3D, STEP)+- 3D model files: `tdc7200pw-etched.step` / `tdc7200pw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tdc7200pw.step` / `tdc7200pw.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tdc7200.pdf) (52 pp, sha256 `0a0accdd4231b23e`, retrieved 2026-09-26, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tdc7200pw-datasheet.pdf)
page.jsonadded+192
@@ -0,0 +1,192 @@+{+  "slug": "tdc7200pw",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments ADCs/DACs - Special Purpose, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "tdc7200pw",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tdc7200pw.kicad_sym",+    "tdc7200pw.kicad_mod",+    "tdc7200pw.glb",+    "tdc7200pw.step",+    "tdc7200pw.lbr",+    "docs/hero.png",+    "docs/tdc7200pw-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TDC7200PW",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-14",+    "pin_count": 14,+    "category": "Data Acquisition",+    "subcategory": "ADCs/DACs - Special Purpose",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tdc7200.pdf",+    "parts": {+      "symbol": "tdc7200pw.kicad_sym",+      "footprint": "tdc7200pw.kicad_mod",+      "model_3d": "tdc7200pw-etched.glb",+      "model_3d_plain": "tdc7200pw.glb",+      "model_3d_step": "tdc7200pw-etched.step",+      "model_3d_step_plain": "tdc7200pw.step",+      "lbr": "tdc7200pw.lbr"+    },+    "distributor_links": {+      "lcsc": "C1523567",+      "digikey": "296-41125-5-ND",+      "mouser": "595-TDC7200PW"+    },+    "distributor_check": {+      "checked_at": "2026-09-26T14:37:34Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-41125-5-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TDC7200PW",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "ENABLE",+        "type": "input",+        "description": "Enable signal to TDC; positive edge required after power-up to initialize all digital circuits."+      },+      {+        "number": "2",+        "name": "TRIGG",+        "type": "output",+        "description": "Trigger output signal; generated after START_MEAS command to initiate measurement in analog front-end."+      },+      {+        "number": "3",+        "name": "START",+        "type": "input",+        "description": "START pulse input marking measurement start; trigger edge selectable via START_EDGE configuration bit."+      },+      {+        "number": "4",+        "name": "STOP",+        "type": "input",+        "description": "STOP pulse input for echo detection; up to 5 signals supported with selectable trigger edge via STOP_EDGE bit."+      },+      {+        "number": "5",+        "name": "CLOCK",+        "type": "input",+        "description": "Reference clock input with frequency range 1 to 16 MHz used for internal time base calibration."+      },+      {+        "number": "6",+        "name": "N.C.",+        "type": "unconnected",+        "description": "Not connected."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; provides circuit return and signal reference at 0 V."+      },+      {+        "number": "8",+        "name": "INTB",+        "type": "tri_state",+        "description": "Interrupt output to MCU, active low open-drain; asserts on measurement completion or counter overflow conditions."+      },+      {+        "number": "9",+        "name": "DOUT",+        "type": "tri_state",+        "description": "SPI data output driven during read transactions; enters high impedance state when not being read."+      },+      {+        "number": "10",+        "name": "DIN",+        "type": "input",+        "description": "SPI data input; receives configuration and register access commands from master device."+      },+      {+        "number": "11",+        "name": "CSB",+        "type": "input",+        "description": "SPI chip select bar, active low; must remain low throughout a complete SPI transaction."+      },+      {+        "number": "12",+        "name": "SCLK",+        "type": "input",+        "description": "SPI clock input; supports frequencies up to 20 MHz per timing specifications."+      },+      {+        "number": "13",+        "name": "VREG",+        "type": "power_out",+        "description": "LDO output terminal for internal analog circuits; requires 0.4 to 2.7 µF external ceramic decoupling capacitor."+      },+      {+        "number": "14",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input; operating voltage range 2.0 V to 3.6 V per specifications."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 52,+        "cost_usd": 0.3543,+        "at": "2026-09-26T14:37:16"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tdc7200.pdf",+        "pages": 52,+        "sha256": "0a0accdd4231b23e",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file