main
Ray Publish 0.2.0 cc7ddad
{
  "slug": "td1837",
  "version": "0.2.0",
  "type": "component",
  "description": "Techcode Semicon DC-DC Converters, ESOP-8. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "dc-dc converters",
    "td1837",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "td1837.kicad_sym",
    "td1837.kicad_mod",
    "td1837.glb",
    "td1837.step",
    "td1837.lbr",
    "docs/hero.png",
    "docs/td1837-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "td1837-hero.glb",
    "td1837-hero.overlay.json"
  ],
  "component": {
    "mpn": "TD1837",
    "manufacturer": "Techcode Semicon",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "DC-DC Converters",
    "subcategory": "DC-DC Converters",
    "datasheet": "",
    "parts": {
      "symbol": "td1837.kicad_sym",
      "footprint": "td1837.kicad_mod",
      "model_3d": "td1837-hero.glb",
      "model_3d_plain": "td1837.glb",
      "model_3d_step": "td1837-etched.step",
      "model_3d_step_plain": "td1837.step",
      "lbr": "td1837.lbr"
    },
    "distributor_links": {
      "lcsc": "C2832213"
    },
    "distributor_check": {
      "checked_at": "2026-11-16T22:40:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SW",
        "type": "output",
        "description": "Switch Node. Output from the internal high-side power MOSFET (250mΩ RDS(on)). Requires an external low-VF Schottky rectifier to ground placed close to the pin to reduce switching spikes. Switch voltage range -0.5V to VIN+0.5V."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable Input (positive logic). Pulling below the falling threshold (~1.7V) or leaving floating shuts the chip down; pulling above the rising threshold (~1.9V, spec 1.3V min to 2.2V max) enables the chip. Internal ~1MΩ pull-down to GND."
      },
      {
        "number": "3",
        "name": "COMP",
        "type": "output",
        "description": "Compensation. Output of the internal GM error amplifier. Connect an external R-C compensation network here to set loop dynamics. Internally clamped between ~0.9V (min) and ~2.0V (max) during operation; do not drive above 2.6V."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback. Inverting input to the internal error amplifier. An external resistive divider from VOUT to GND sets the output voltage; the divider is compared to the internal 0.8V reference (VFB = 0.780V to 0.820V)."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground. Common return for the device and shared with the exposed thermal pad. Connect as close as possible to the output capacitor while avoiding high-current switch paths. The exposed pad must be tied to the GND plane for optimal thermal performance."
      },
      {
        "number": "6",
        "name": "FREQ",
        "type": "input",
        "description": "Switching Frequency Program Input. Connect a resistor RFREQ from this pin to ground to program the oscillator frequency (up to 1MHz). RFREQ(kΩ) = 100000/fs(kHz) − 5. For VIN ≥ 64V, set fsw below 400kHz."
      },
      {
        "number": "7",
        "name": "VIN",
        "type": "power_in",
        "description": "Input Supply. Supplies all internal control circuitry, bootstrap regulators, and the high-side power MOSFET. Absolute maximum 80V (operating range 12V to 80V; VIN UVLO ~7.2V rising, ~6.5V falling). A decoupling capacitor to ground must be placed close to this pin."
      },
      {
        "number": "8",
        "name": "BST",
        "type": "power_in",
        "description": "Bootstrap. Positive supply for the internal floating high-side MOSFET gate driver. Connect a bypass capacitor (typ. 0.1μF) between BST and SW. Internally regulated to ~5V above SW; BST-to-SW absolute maximum is +5V."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad; the maker lists it with pin 5 (\"5  GND, Exposed pad ... Connect exposed pad to GND plane for optimal thermal performance\"). KiCad's SOIC-8-1EP numbers the exposed pad 9."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "",
        "pages": 14,
        "sha256": "664614e8ad9c691d",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "td1837.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "td1837-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "68a3e139d1f0bdc71fa4be411990b7d3b068433af1f5f23dead0a81e4aa520bb",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}