main
History Download
Ray Initial commit: component/tcan1043adrq1 9abc340

TCAN1043ADRQ1

Texas Instruments · CAN Transceivers · SOIC-14

TCAN1043ADRQ1 from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXD input CAN transmit data input referenced to VIO with integrated 40-80kΩ pull-up resistor
2 GND power_in Ground connection; establish low-impedance return path to PCB ground plane
3 VCC power_in 5V transceiver power supply; requires 100nF bypass capacitor for stable operation
4 RXD tri_state CAN receive data output referenced to VIO; tri-states when VIO falls below UVIO(F) threshold
5 VIO power_in I/O power supply (1.7V to 5.5V range) for digital interface voltage matching; requires 100nF bypass capacitor
6 EN input Mode control enable input with integrated 40-80kΩ pull-down resistor; logic referenced to VIO
7 INH tri_state High-voltage inhibit output sourcing VSUP level; drives system regulator enable pin, open-drain design, sources 6mA maximum
8 nFAULT tri_state Active-low fault status output referenced to VIO; indicates device faults and remote/local wake-up events
9 WAKE input High-voltage local wake-up input (-45V to +45V, limited to VSUP+0.3V maximum); bi-directional edge triggered
10 VSUP power_in High-voltage battery power supply (4.5V to 40V nominal); supports ±58V transients and 300ms load-dump events
11 NC unconnected No connection; internally unconnected, leave floating
12 CANL bidirectional CAN low differential line; I/O pin with ±58V fault tolerance and 25-50kΩ receiver impedance
13 CANH bidirectional CAN high differential line; I/O pin with ±58V fault tolerance and 25-50kΩ receiver impedance
14 nSTB input Standby mode control input with integrated 40-80kΩ pull-down resistor; logic referenced to VIO

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14
Category Interface
Pins 14

CAD (KiCad official)

  • Symbol: TCAN1043ADRQ1
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: tcan1043adrq1-etched.step / tcan1043adrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tcan1043adrq1.step / tcan1043adrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (56 pp, sha256 e10c43fbe062e9cb, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF