component
TCAN1043ADRQ1
Public Made by Adomby adom
Texas Instruments CAN Transceivers, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+51@@ -0,0 +1,51 @@+# TCAN1043ADRQ1++**Texas Instruments** · CAN Transceivers · SOIC-14++TCAN1043ADRQ1 from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TXD | input | CAN transmit data input referenced to VIO with integrated 40-80kΩ pull-up resistor |+| 2 | GND | power_in | Ground connection; establish low-impedance return path to PCB ground plane |+| 3 | VCC | power_in | 5V transceiver power supply; requires 100nF bypass capacitor for stable operation |+| 4 | RXD | tri_state | CAN receive data output referenced to VIO; tri-states when VIO falls below UVIO(F) threshold |+| 5 | VIO | power_in | I/O power supply (1.7V to 5.5V range) for digital interface voltage matching; requires 100nF bypass capacitor |+| 6 | EN | input | Mode control enable input with integrated 40-80kΩ pull-down resistor; logic referenced to VIO |+| 7 | INH | tri_state | High-voltage inhibit output sourcing VSUP level; drives system regulator enable pin, open-drain design, sources 6mA maximum |+| 8 | nFAULT | tri_state | Active-low fault status output referenced to VIO; indicates device faults and remote/local wake-up events |+| 9 | WAKE | input | High-voltage local wake-up input (-45V to +45V, limited to VSUP+0.3V maximum); bi-directional edge triggered |+| 10 | VSUP | power_in | High-voltage battery power supply (4.5V to 40V nominal); supports ±58V transients and 300ms load-dump events |+| 11 | NC | unconnected | No connection; internally unconnected, leave floating |+| 12 | CANL | bidirectional | CAN low differential line; I/O pin with ±58V fault tolerance and 25-50kΩ receiver impedance |+| 13 | CANH | bidirectional | CAN high differential line; I/O pin with ±58V fault tolerance and 25-50kΩ receiver impedance |+| 14 | nSTB | input | Standby mode control input with integrated 40-80kΩ pull-down resistor; logic referenced to VIO |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-14 |+| Category | Interface |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `TCAN1043ADRQ1`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOIC-14 (KiCad packages3D, STEP)+- 3D model files: `tcan1043adrq1-etched.step` / `tcan1043adrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tcan1043adrq1.step` / `tcan1043adrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tcan1043a-q1) (56 pp, sha256 `e10c43fbe062e9cb`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tcan1043adrq1-datasheet.pdf)
page.jsonadded+177@@ -0,0 +1,177 @@+{+ "slug": "tcan1043adrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments CAN Transceivers, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "tcan1043adrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tcan1043adrq1.kicad_sym",+ "tcan1043adrq1.kicad_mod",+ "tcan1043adrq1.glb",+ "tcan1043adrq1.step",+ "tcan1043adrq1.lbr",+ "docs/hero.png",+ "docs/tcan1043adrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TCAN1043ADRQ1",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-14",+ "pin_count": 14,+ "category": "Interface",+ "subcategory": "CAN Transceivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tcan1043a-q1",+ "parts": {+ "symbol": "tcan1043adrq1.kicad_sym",+ "footprint": "tcan1043adrq1.kicad_mod",+ "model_3d": "tcan1043adrq1-etched.glb",+ "model_3d_plain": "tcan1043adrq1.glb",+ "model_3d_step": "tcan1043adrq1-etched.step",+ "model_3d_step_plain": "tcan1043adrq1.step",+ "lbr": "tcan1043adrq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C5215847"+ },+ "pins": [+ {+ "number": "1",+ "name": "TXD",+ "type": "input",+ "description": "CAN transmit data input referenced to VIO with integrated 40-80kΩ pull-up resistor"+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground connection; establish low-impedance return path to PCB ground plane"+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "5V transceiver power supply; requires 100nF bypass capacitor for stable operation"+ },+ {+ "number": "4",+ "name": "RXD",+ "type": "tri_state",+ "description": "CAN receive data output referenced to VIO; tri-states when VIO falls below UVIO(F) threshold"+ },+ {+ "number": "5",+ "name": "VIO",+ "type": "power_in",+ "description": "I/O power supply (1.7V to 5.5V range) for digital interface voltage matching; requires 100nF bypass capacitor"+ },+ {+ "number": "6",+ "name": "EN",+ "type": "input",+ "description": "Mode control enable input with integrated 40-80kΩ pull-down resistor; logic referenced to VIO"+ },+ {+ "number": "7",+ "name": "INH",+ "type": "tri_state",+ "description": "High-voltage inhibit output sourcing VSUP level; drives system regulator enable pin, open-drain design, sources 6mA maximum"+ },+ {+ "number": "8",+ "name": "nFAULT",+ "type": "tri_state",+ "description": "Active-low fault status output referenced to VIO; indicates device faults and remote/local wake-up events"+ },+ {+ "number": "9",+ "name": "WAKE",+ "type": "input",+ "description": "High-voltage local wake-up input (-45V to +45V, limited to VSUP+0.3V maximum); bi-directional edge triggered"+ },+ {+ "number": "10",+ "name": "VSUP",+ "type": "power_in",+ "description": "High-voltage battery power supply (4.5V to 40V nominal); supports ±58V transients and 300ms load-dump events"+ },+ {+ "number": "11",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; internally unconnected, leave floating"+ },+ {+ "number": "12",+ "name": "CANL",+ "type": "bidirectional",+ "description": "CAN low differential line; I/O pin with ±58V fault tolerance and 25-50kΩ receiver impedance"+ },+ {+ "number": "13",+ "name": "CANH",+ "type": "bidirectional",+ "description": "CAN high differential line; I/O pin with ±58V fault tolerance and 25-50kΩ receiver impedance"+ },+ {+ "number": "14",+ "name": "nSTB",+ "type": "input",+ "description": "Standby mode control input with integrated 40-80kΩ pull-down resistor; logic referenced to VIO"+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 56,+ "cost_usd": 0.5638,+ "at": "2026-09-22T00:16:17"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tcan1043a-q1",+ "pages": 56,+ "sha256": "e10c43fbe062e9cb",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}