main
Ray
tca9554dbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
ac9fa35
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252
{
"schema_version": 1,
"type": "component",
"slug": "tca9554dbr",
"title": "TCA9554DBR",
"brief": "Texas Instruments I/O Expanders, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"interface",
"tca9554dbr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "TCA9554DBR",
"manufacturer": "Texas Instruments",
"package": "SSOP-16-208mil",
"pin_count": 16,
"category": "Interface",
"subcategory": "I/O Expanders",
"datasheet": "https://www.ti.com/cn/lit/ds/symlink/tca9554.pdf",
"parts": {
"symbol": "tca9554dbr.kicad_sym",
"footprint": "tca9554dbr.kicad_mod",
"model_3d": "tca9554dbr-etched.glb",
"model_3d_plain": "tca9554dbr.glb",
"model_3d_step": "tca9554dbr-etched.step",
"model_3d_step_plain": "tca9554dbr.step",
"lbr": "tca9554dbr.lbr"
},
"distributor_links": {
"lcsc": "C2669750"
},
"pins": [
{
"number": "1",
"name": "A0",
"type": "input",
"description": "Address input; connect directly to VCC or ground to select device address; supports up to 8 devices on same I2C bus."
},
{
"number": "2",
"name": "A1",
"type": "input",
"description": "Address input; connect directly to VCC or ground to select device address; supports up to 8 devices on same I2C bus."
},
{
"number": "3",
"name": "A2",
"type": "input",
"description": "Address input; connect directly to VCC or ground to select device address; supports up to 8 devices on same I2C bus."
},
{
"number": "4",
"name": "P0",
"type": "bidirectional",
"description": "I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output."
},
{
"number": "5",
"name": "P1",
"type": "bidirectional",
"description": "I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output."
},
{
"number": "6",
"name": "P2",
"type": "bidirectional",
"description": "I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output."
},
{
"number": "7",
"name": "P3",
"type": "bidirectional",
"description": "I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground return connection."
},
{
"number": "9",
"name": "P4",
"type": "bidirectional",
"description": "I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output."
},
{
"number": "10",
"name": "P5",
"type": "bidirectional",
"description": "I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output."
},
{
"number": "11",
"name": "P6",
"type": "bidirectional",
"description": "I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output."
},
{
"number": "12",
"name": "P7",
"type": "bidirectional",
"description": "I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output."
},
{
"number": "13",
"name": "INT",
"type": "output",
"description": "Open-drain interrupt output activated when input port state differs from Input Port register; connect to VCC through pull-up resistor; active low."
},
{
"number": "14",
"name": "SCL",
"type": "input",
"description": "I2C serial clock input; supports 100kHz standard mode and 400kHz fast mode operation; must connect to VCC through pull-up resistor."
},
{
"number": "15",
"name": "SDA",
"type": "bidirectional",
"description": "I2C serial data bus with open-drain output; supports 100kHz standard mode and 400kHz fast mode operation; must connect to VCC through pull-up resistor."
},
{
"number": "16",
"name": "VCC",
"type": "power_in",
"description": "Power supply input; operating range 1.65V to 5.5V; bypass capacitor 100nF recommended."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 48,
"cost_usd": 0.38,
"at": "2026-09-24T00:50:44"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/ds/symlink/tca9554.pdf",
"pages": 48,
"sha256": "a2ebe3b2daa63cfa",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tca9554dbr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
6.2,
2.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tca9554dbr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
6.2,
2.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "aa54e6f66fecca525ac61a80de472b81be9430a445222a8a4220cbd427b9aea6",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "SSOP-16-208mil",
"Category": "Interface",
"Pins": "16"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"tca9554dbr"
],
"discovery_pitch": "TCA9554DBR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tca9554dbr.kicad_sym",
"tca9554dbr.kicad_mod",
"tca9554dbr.glb",
"tca9554dbr.step",
"tca9554dbr.lbr",
"docs/hero.png",
"docs/tca9554dbr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
}
}