main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tca9554dbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tca9554dbr: viewers · Ray
package.json tca9554dbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tca9554dbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tca9554dbr · Ray
tca9554dbr-etched.fit.json tca9554dbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tca9554dbr-etched.glb tca9554dbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tca9554dbr-etched.step tca9554dbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tca9554dbr.glb Publish 0.1.0 · Ray
tca9554dbr.kicad_mod Publish 0.1.0 · Ray
tca9554dbr.kicad_sym Publish 0.1.0 · Ray
tca9554dbr.lbr Publish 0.1.0 · Ray
tca9554dbr.step Publish 0.1.0 · Ray

TCA9554DBR

Texas Instruments · I/O Expanders · SSOP-16-208mil

TCA9554DBR from Texas Instruments, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Address input; connect directly to VCC or ground to select device address; supports up to 8 devices on same I2C bus.
2 A1 input Address input; connect directly to VCC or ground to select device address; supports up to 8 devices on same I2C bus.
3 A2 input Address input; connect directly to VCC or ground to select device address; supports up to 8 devices on same I2C bus.
4 P0 bidirectional I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output.
5 P1 bidirectional I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output.
6 P2 bidirectional I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output.
7 P3 bidirectional I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output.
8 GND power_in Ground return connection.
9 P4 bidirectional I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output.
10 P5 bidirectional I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output.
11 P6 bidirectional I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output.
12 P7 bidirectional I/O port with push-pull output structure; configured as input at power-on with internal 100kΩ pull-up; software configurable as input or output.
13 INT output Open-drain interrupt output activated when input port state differs from Input Port register; connect to VCC through pull-up resistor; active low.
14 SCL input I2C serial clock input; supports 100kHz standard mode and 400kHz fast mode operation; must connect to VCC through pull-up resistor.
15 SDA bidirectional I2C serial data bus with open-drain output; supports 100kHz standard mode and 400kHz fast mode operation; must connect to VCC through pull-up resistor.
16 VCC power_in Power supply input; operating range 1.65V to 5.5V; bypass capacitor 100nF recommended.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-16-208mil
Category Interface
Pins 16

CAD (KiCad official)

  • Symbol: TCA9554DBR
  • Footprint: Package_SO:SSOP-16_5.3x6.2mm_P0.65mm
  • 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
  • 3D model files: tca9554dbr-etched.step / tca9554dbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tca9554dbr.step / tca9554dbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 a2ebe3b2daa63cfa, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF