component
TC74LCX245FK
Public Made by Adomby adom
TOSHIBA Buffers, Drivers, Receivers, Transceivers, VSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by adom_assets · KiCad file format 20240108
TC74LCX245FK
TOSHIBA · Buffers, Drivers, Receivers, Transceivers · VSSOP-20
TC74LCX245FK from TOSHIBA, in a VSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIR | input | Direction control input: a low level selects A-to-B transfer and a high level selects B-to-A transfer, with the input rated 0 to 5.5 V. |
| 2 | A1 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |
| 3 | A2 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |
| 4 | A3 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |
| 5 | A4 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |
| 6 | A5 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |
| 7 | A6 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |
| 8 | A7 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |
| 9 | A8 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |
| 10 | GND | power_in | Ground reference for the device. |
| 11 | B8 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |
| 12 | B7 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |
| 13 | B6 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |
| 14 | B5 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |
| 15 | B4 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |
| 16 | B3 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |
| 17 | B2 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |
| 18 | B1 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |
| 19 | OE | input | Active-low output enable input (rated 0 to 5.5 V); when high, both buses are placed in the high-impedance (Z) state and are effectively isolated. |
| 20 | VCC | power_in | Power supply, 1.65 to 3.6 V for normal operation (designed for 3.3 V systems, with 5 V-tolerant inputs and outputs). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | VSSOP-20 |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC bus I/O voltage | VI/O | -0.5 | 7 | V | Output in OFF state (Note 2) | 3 | |
| Power supply voltage | VCC | -0.5 | 7 | V | 3 | ||
| DC input voltage (DIR, OE) | VIN | -0.5 | 7 | V | 3 | ||
| DC bus I/O voltage | VI/O | -0.5 | V | High or low state (Note 3) | 3 | ||
| Input diode current | IIK | 50 | mA | 3 | |||
| Output diode current | IOK | 50 | mA | Note 4 | 3 | ||
| DC output current | IOUT | 50 | mA | 3 | |||
| Power dissipation | PD | 180 | mW | 3 | |||
| DC VCC/ground current | ICC/IGND | 100 | mA | 3 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Power supply voltage | VCC | 1.65 | 3.6 | V | 3 | ||
| Power supply voltage | VCC | 1.5 | 3.6 | V | Note 2: data retention only | 3 | |
| Input voltage (DIR, OE) | VIN | 0 | 5.5 | V | 3 | ||
| Bus I/O voltage | VI/O | 0 | 5.5 | V | Output in OFF state (Note 3) | 3 | |
| Bus I/O voltage | VI/O | 0 | V | High or low state (Note 4) | 3 | ||
| Output current | IOH/IOL | 24 | mA | VCC 3.0 to 3.6 V (Note 5) | 3 | ||
| Output current | IOH/IOL | 12 | mA | VCC 2.7 to 3.0 V (Note 6) | 3 | ||
| Operating temperature | Topr | -40 | 85 | °C | 3 | ||
| Input rise and fall time | dt/dv | 0 | 10 | ns/V | VIN 0.8 to 2.0 V, VCC 3.0 V (Note 7) | 3 | |
| Input voltage H-level | VIH | 1.7 | V | VCC 2.3 to 2.7 V | 4 | ||
| Input voltage H-level | VIH | 2 | V | VCC 2.7 to 3.6 V | 4 | ||
| Input voltage L-level | VIL | 0.7 | V | VCC 2.3 to 2.7 V | 4 | ||
| Input voltage L-level | VIL | 0.8 | V | VCC 2.7 to 3.6 V | 4 | ||
| Output voltage H-level | VOH | 1.05 | V | VIN = VIH or VIL, VCC 1.65 V (IOH value not extracted) | 4 | ||
| Output voltage H-level | VOH | 1.7 | V | VIN = VIH or VIL, IOH = 8 mA, VCC 2.3 V | 4 | ||
| Output voltage H-level | VOH | 2.2 | V | VIN = VIH or VIL, IOH = 12 mA, VCC 2.7 V | 4 | ||
| Output voltage H-level | VOH | 2.4 | V | VIN = VIH or VIL, IOH = 18 mA, VCC 3.0 V | 4 | ||
| Output voltage L-level | VOL | 0.2 | V | VIN = VIH or VIL, IOL = 100 µA, VCC 1.65 to 3.6 V | 4 | ||
| Output voltage L-level | VOL | 0.45 | V | VIN = VIH or VIL, IOL = 4 mA, VCC 1.65 V | 4 | ||
| Output voltage L-level | VOL | 0.7 | V | VIN = VIH or VIL, IOL = 8 mA, VCC 2.3 V | 4 | ||
| Output voltage L-level | VOL | 0.4 | V | VIN = VIH or VIL, IOL = 12 mA, VCC 2.7 V | 4 | ||
| Output voltage L-level | VOL | 0.55 | V | VIN = VIH or VIL, IOL = 24 mA, VCC 3.0 V | 4 | ||
| Input leakage current | IIN | 5 | µA | VIN = 0 to 5.5 V, VCC 1.65 to 3.6 V | 4 | ||
| 3-state output OFF state current | IOZ | 5 | µA | VIN = VIH or VIL, VOUT = 0 to 5.5 V, VCC 1.65 to 3.6 V | 4 | ||
| Power-off leakage current | IOFF | 10 | µA | VIN/VOUT = 5.5 V, VCC 0 V | 4 | ||
| Quiescent supply current | ICC | 10 | µA | VIN = VCC or GND, VCC 1.65 to 3.6 V | 4 | ||
| Increase in ICC per input | ICC | 500 | µA | VIH = VCC-0.6 V (per 1 input), VCC 2.7 to 3.6 V | 4 | ||
| Propagation delay time | tpLH, tpHL | 25 | ns | VCC 1.8±0.15 V, Figure 1, Figure 2 | 5 | ||
| Propagation delay time | tpLH, tpHL | 9 | ns | VCC 2.5±0.2 V, Figure 1, Figure 2 | 5 | ||
| Propagation delay time | tpLH, tpHL | 8 | ns | VCC 2.7 V, Figure 1, Figure 2 | 5 | ||
| Propagation delay time | tpLH, tpHL | 1.5 | 7 | ns | VCC 3.3±0.3 V, Figure 1, Figure 2 | 5 | |
| Output enable time | tpZL, tpZH | 34 | ns | VCC 1.8±0.15 V, Figure 1, Figure 3 | 5 | ||
| Output enable time | tpZL, tpZH | 17 | ns | VCC 2.5±0.2 V, Figure 1, Figure 3 | 5 | ||
| Output enable time | tpZL, tpZH | 9.5 | ns | VCC 2.7 V, Figure 1, Figure 3 | 5 | ||
| Output enable time | tpZL, tpZH | 1.5 | 8.5 | ns | VCC 3.3±0.3 V, Figure 1, Figure 3 | 5 | |
| Output disable time | tpLZ, tpHZ | 32 | ns | VCC 1.8±0.15 V, Figure 1, Figure 3 | 5 | ||
| Output disable time | tpLZ, tpHZ | 16 | ns | VCC 2.5±0.2 V, Figure 1, Figure 3 | 5 | ||
| Output disable time | tpLZ, tpHZ | 8.5 | ns | VCC 2.7 V, Figure 1, Figure 3 | 5 | ||
| Output disable time | tpLZ, tpHZ | 1.5 | 7.5 | ns | VCC 3.3±0.3 V, Figure 1, Figure 3 | 5 | |
| Output to output skew | tosLH, tosHL | 1 | ns | VCC 3.3±0.3 V (Note: parameter guaranteed by design) | 5 |
CAD (Adom-generated)
- Symbol:
TC74LCX245FK - Footprint:
Adom_Gen:TOSHIBA_TC74 - 3D model: generated to fit the land (STEP)
- 3D model files:
tc74lcx245fk-etched.step/tc74lcx245fk-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc74lcx245fk.step/tc74lcx245fk.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TOSHIBA datasheet (11 pp, sha256
9178ff8c884ab13c, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.