Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TC74LCX245FK

TOSHIBA · Buffers, Drivers, Receivers, Transceivers · VSSOP-20

TC74LCX245FK from TOSHIBA, in a VSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 DIR input Direction control input: a low level selects A-to-B transfer and a high level selects B-to-A transfer, with the input rated 0 to 5.5 V.
2 A1 bidirectional A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors.
3 A2 bidirectional A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors.
4 A3 bidirectional A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors.
5 A4 bidirectional A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors.
6 A5 bidirectional A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors.
7 A6 bidirectional A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors.
8 A7 bidirectional A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors.
9 A8 bidirectional A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors.
10 GND power_in Ground reference for the device.
11 B8 bidirectional B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on.
12 B7 bidirectional B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on.
13 B6 bidirectional B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on.
14 B5 bidirectional B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on.
15 B4 bidirectional B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on.
16 B3 bidirectional B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on.
17 B2 bidirectional B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on.
18 B1 bidirectional B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on.
19 OE input Active-low output enable input (rated 0 to 5.5 V); when high, both buses are placed in the high-impedance (Z) state and are effectively isolated.
20 VCC power_in Power supply, 1.65 to 3.6 V for normal operation (designed for 3.3 V systems, with 5 V-tolerant inputs and outputs).

Key specifications

Parameter Value
Manufacturer TOSHIBA
Package VSSOP-20
Category Logic
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC bus I/O voltage VI/O -0.5 7 V Output in OFF state (Note 2) 3
Power supply voltage VCC -0.5 7 V 3
DC input voltage (DIR, OE) VIN -0.5 7 V 3
DC bus I/O voltage VI/O -0.5 V High or low state (Note 3) 3
Input diode current IIK 50 mA 3
Output diode current IOK 50 mA Note 4 3
DC output current IOUT 50 mA 3
Power dissipation PD 180 mW 3
DC VCC/ground current ICC/IGND 100 mA 3
Storage temperature Tstg -65 150 °C 3
Power supply voltage VCC 1.65 3.6 V 3
Power supply voltage VCC 1.5 3.6 V Note 2: data retention only 3
Input voltage (DIR, OE) VIN 0 5.5 V 3
Bus I/O voltage VI/O 0 5.5 V Output in OFF state (Note 3) 3
Bus I/O voltage VI/O 0 V High or low state (Note 4) 3
Output current IOH/IOL 24 mA VCC 3.0 to 3.6 V (Note 5) 3
Output current IOH/IOL 12 mA VCC 2.7 to 3.0 V (Note 6) 3
Operating temperature Topr -40 85 °C 3
Input rise and fall time dt/dv 0 10 ns/V VIN 0.8 to 2.0 V, VCC 3.0 V (Note 7) 3
Input voltage H-level VIH 1.7 V VCC 2.3 to 2.7 V 4
Input voltage H-level VIH 2 V VCC 2.7 to 3.6 V 4
Input voltage L-level VIL 0.7 V VCC 2.3 to 2.7 V 4
Input voltage L-level VIL 0.8 V VCC 2.7 to 3.6 V 4
Output voltage H-level VOH 1.05 V VIN = VIH or VIL, VCC 1.65 V (IOH value not extracted) 4
Output voltage H-level VOH 1.7 V VIN = VIH or VIL, IOH = 8 mA, VCC 2.3 V 4
Output voltage H-level VOH 2.2 V VIN = VIH or VIL, IOH = 12 mA, VCC 2.7 V 4
Output voltage H-level VOH 2.4 V VIN = VIH or VIL, IOH = 18 mA, VCC 3.0 V 4
Output voltage L-level VOL 0.2 V VIN = VIH or VIL, IOL = 100 µA, VCC 1.65 to 3.6 V 4
Output voltage L-level VOL 0.45 V VIN = VIH or VIL, IOL = 4 mA, VCC 1.65 V 4
Output voltage L-level VOL 0.7 V VIN = VIH or VIL, IOL = 8 mA, VCC 2.3 V 4
Output voltage L-level VOL 0.4 V VIN = VIH or VIL, IOL = 12 mA, VCC 2.7 V 4
Output voltage L-level VOL 0.55 V VIN = VIH or VIL, IOL = 24 mA, VCC 3.0 V 4
Input leakage current IIN 5 µA VIN = 0 to 5.5 V, VCC 1.65 to 3.6 V 4
3-state output OFF state current IOZ 5 µA VIN = VIH or VIL, VOUT = 0 to 5.5 V, VCC 1.65 to 3.6 V 4
Power-off leakage current IOFF 10 µA VIN/VOUT = 5.5 V, VCC 0 V 4
Quiescent supply current ICC 10 µA VIN = VCC or GND, VCC 1.65 to 3.6 V 4
Increase in ICC per input ICC 500 µA VIH = VCC-0.6 V (per 1 input), VCC 2.7 to 3.6 V 4
Propagation delay time tpLH, tpHL 25 ns VCC 1.8±0.15 V, Figure 1, Figure 2 5
Propagation delay time tpLH, tpHL 9 ns VCC 2.5±0.2 V, Figure 1, Figure 2 5
Propagation delay time tpLH, tpHL 8 ns VCC 2.7 V, Figure 1, Figure 2 5
Propagation delay time tpLH, tpHL 1.5 7 ns VCC 3.3±0.3 V, Figure 1, Figure 2 5
Output enable time tpZL, tpZH 34 ns VCC 1.8±0.15 V, Figure 1, Figure 3 5
Output enable time tpZL, tpZH 17 ns VCC 2.5±0.2 V, Figure 1, Figure 3 5
Output enable time tpZL, tpZH 9.5 ns VCC 2.7 V, Figure 1, Figure 3 5
Output enable time tpZL, tpZH 1.5 8.5 ns VCC 3.3±0.3 V, Figure 1, Figure 3 5
Output disable time tpLZ, tpHZ 32 ns VCC 1.8±0.15 V, Figure 1, Figure 3 5
Output disable time tpLZ, tpHZ 16 ns VCC 2.5±0.2 V, Figure 1, Figure 3 5
Output disable time tpLZ, tpHZ 8.5 ns VCC 2.7 V, Figure 1, Figure 3 5
Output disable time tpLZ, tpHZ 1.5 7.5 ns VCC 3.3±0.3 V, Figure 1, Figure 3 5
Output to output skew tosLH, tosHL 1 ns VCC 3.3±0.3 V (Note: parameter guaranteed by design) 5

CAD (Adom-generated)

  • Symbol: TC74LCX245FK
  • Footprint: Adom_Gen:TOSHIBA_TC74
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tc74lcx245fk-etched.step / tc74lcx245fk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc74lcx245fk.step / tc74lcx245fk.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TOSHIBA datasheet (11 pp, sha256 9178ff8c884ab13c, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF