← Commit history
README.mdadded+113
@@ -0,0 +1,113 @@+# TC74LCX245FK++**TOSHIBA** · Buffers, Drivers, Receivers, Transceivers · VSSOP-20++TC74LCX245FK from TOSHIBA, in a VSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DIR | input | Direction control input: a low level selects A-to-B transfer and a high level selects B-to-A transfer, with the input rated 0 to 5.5 V. |+| 2 | A1 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |+| 3 | A2 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |+| 4 | A3 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |+| 5 | A4 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |+| 6 | A5 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |+| 7 | A6 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |+| 8 | A7 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |+| 9 | A8 | bidirectional | A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors. |+| 10 | GND | power_in | Ground reference for the device. |+| 11 | B8 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |+| 12 | B7 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |+| 13 | B6 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |+| 14 | B5 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |+| 15 | B4 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |+| 16 | B3 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |+| 17 | B2 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |+| 18 | B1 | bidirectional | B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on. |+| 19 | OE | input | Active-low output enable input (rated 0 to 5.5 V); when high, both buses are placed in the high-impedance (Z) state and are effectively isolated. |+| 20 | VCC | power_in | Power supply, 1.65 to 3.6 V for normal operation (designed for 3.3 V systems, with 5 V-tolerant inputs and outputs). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | TOSHIBA |+| Package | VSSOP-20 |+| Category | Logic |+| Pins | 20 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| DC bus I/O voltage | VI/O | -0.5 |  | 7 | V | Output in OFF state (Note 2) | 3 |+| Power supply voltage | VCC | -0.5 |  | 7 | V |  | 3 |+| DC input voltage (DIR, OE) | VIN | -0.5 |  | 7 | V |  | 3 |+| DC bus I/O voltage | VI/O | -0.5 |  |  | V | High or low state (Note 3) | 3 |+| Input diode current | IIK |  |  | 50 | mA |  | 3 |+| Output diode current | IOK |  |  | 50 | mA | Note 4 | 3 |+| DC output current | IOUT |  |  | 50 | mA |  | 3 |+| Power dissipation | PD |  |  | 180 | mW |  | 3 |+| DC VCC/ground current | ICC/IGND |  |  | 100 | mA |  | 3 |+| Storage temperature | Tstg | -65 |  | 150 | °C |  | 3 |+| Power supply voltage | VCC | 1.65 |  | 3.6 | V |  | 3 |+| Power supply voltage | VCC | 1.5 |  | 3.6 | V | Note 2: data retention only | 3 |+| Input voltage (DIR, OE) | VIN | 0 |  | 5.5 | V |  | 3 |+| Bus I/O voltage | VI/O | 0 |  | 5.5 | V | Output in OFF state (Note 3) | 3 |+| Bus I/O voltage | VI/O | 0 |  |  | V | High or low state (Note 4) | 3 |+| Output current | IOH/IOL |  |  | 24 | mA | VCC 3.0 to 3.6 V (Note 5) | 3 |+| Output current | IOH/IOL |  |  | 12 | mA | VCC 2.7 to 3.0 V (Note 6) | 3 |+| Operating temperature | Topr | -40 |  | 85 | °C |  | 3 |+| Input rise and fall time | dt/dv | 0 |  | 10 | ns/V | VIN 0.8 to 2.0 V, VCC 3.0 V (Note 7) | 3 |+| Input voltage H-level | VIH | 1.7 |  |  | V | VCC 2.3 to 2.7 V | 4 |+| Input voltage H-level | VIH | 2 |  |  | V | VCC 2.7 to 3.6 V | 4 |+| Input voltage L-level | VIL |  |  | 0.7 | V | VCC 2.3 to 2.7 V | 4 |+| Input voltage L-level | VIL |  |  | 0.8 | V | VCC 2.7 to 3.6 V | 4 |+| Output voltage H-level | VOH | 1.05 |  |  | V | VIN = VIH or VIL, VCC 1.65 V (IOH value not extracted) | 4 |+| Output voltage H-level | VOH | 1.7 |  |  | V | VIN = VIH or VIL, IOH = 8 mA, VCC 2.3 V | 4 |+| Output voltage H-level | VOH | 2.2 |  |  | V | VIN = VIH or VIL, IOH = 12 mA, VCC 2.7 V | 4 |+| Output voltage H-level | VOH | 2.4 |  |  | V | VIN = VIH or VIL, IOH = 18 mA, VCC 3.0 V | 4 |+| Output voltage L-level | VOL |  |  | 0.2 | V | VIN = VIH or VIL, IOL = 100 µA, VCC 1.65 to 3.6 V | 4 |+| Output voltage L-level | VOL |  |  | 0.45 | V | VIN = VIH or VIL, IOL = 4 mA, VCC 1.65 V | 4 |+| Output voltage L-level | VOL |  |  | 0.7 | V | VIN = VIH or VIL, IOL = 8 mA, VCC 2.3 V | 4 |+| Output voltage L-level | VOL |  |  | 0.4 | V | VIN = VIH or VIL, IOL = 12 mA, VCC 2.7 V | 4 |+| Output voltage L-level | VOL |  |  | 0.55 | V | VIN = VIH or VIL, IOL = 24 mA, VCC 3.0 V | 4 |+| Input leakage current | IIN |  |  | 5 | µA | VIN = 0 to 5.5 V, VCC 1.65 to 3.6 V | 4 |+| 3-state output OFF state current | IOZ |  |  | 5 | µA | VIN = VIH or VIL, VOUT = 0 to 5.5 V, VCC 1.65 to 3.6 V | 4 |+| Power-off leakage current | IOFF |  |  | 10 | µA | VIN/VOUT = 5.5 V, VCC 0 V | 4 |+| Quiescent supply current | ICC |  |  | 10 | µA | VIN = VCC or GND, VCC 1.65 to 3.6 V | 4 |+| Increase in ICC per input | ICC |  |  | 500 | µA | VIH = VCC-0.6 V (per 1 input), VCC 2.7 to 3.6 V | 4 |+| Propagation delay time | tpLH, tpHL |  |  | 25 | ns | VCC 1.8±0.15 V, Figure 1, Figure 2 | 5 |+| Propagation delay time | tpLH, tpHL |  |  | 9 | ns | VCC 2.5±0.2 V, Figure 1, Figure 2 | 5 |+| Propagation delay time | tpLH, tpHL |  |  | 8 | ns | VCC 2.7 V, Figure 1, Figure 2 | 5 |+| Propagation delay time | tpLH, tpHL | 1.5 |  | 7 | ns | VCC 3.3±0.3 V, Figure 1, Figure 2 | 5 |+| Output enable time | tpZL, tpZH |  |  | 34 | ns | VCC 1.8±0.15 V, Figure 1, Figure 3 | 5 |+| Output enable time | tpZL, tpZH |  |  | 17 | ns | VCC 2.5±0.2 V, Figure 1, Figure 3 | 5 |+| Output enable time | tpZL, tpZH |  |  | 9.5 | ns | VCC 2.7 V, Figure 1, Figure 3 | 5 |+| Output enable time | tpZL, tpZH | 1.5 |  | 8.5 | ns | VCC 3.3±0.3 V, Figure 1, Figure 3 | 5 |+| Output disable time | tpLZ, tpHZ |  |  | 32 | ns | VCC 1.8±0.15 V, Figure 1, Figure 3 | 5 |+| Output disable time | tpLZ, tpHZ |  |  | 16 | ns | VCC 2.5±0.2 V, Figure 1, Figure 3 | 5 |+| Output disable time | tpLZ, tpHZ |  |  | 8.5 | ns | VCC 2.7 V, Figure 1, Figure 3 | 5 |+| Output disable time | tpLZ, tpHZ | 1.5 |  | 7.5 | ns | VCC 3.3±0.3 V, Figure 1, Figure 3 | 5 |+| Output to output skew | tosLH, tosHL |  |  | 1 | ns | VCC 3.3±0.3 V (Note: parameter guaranteed by design) | 5 |++## CAD (KiCad official)++- Symbol: `TC74LCX245FK`+- Footprint: `Adom_Gen:TOSHIBA_TC74`+- 3D model: VSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `tc74lcx245fk-etched.step` / `tc74lcx245fk-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tc74lcx245fk.step` / `tc74lcx245fk.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [TOSHIBA datasheet](https://toshiba.semicon-storage.com/info/docget.jsp?did=63393&prodName=TC74LCX245FK) (11 pp, sha256 `9178ff8c884ab13c`, retrieved 2026-10-29, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tc74lcx245fk-datasheet.pdf)
docs/hero.pngadded
⋯ 1 unchanged line ⋯
docs/tc74lcx245fk-datasheet.pdfadded
⋯ 1 unchanged line ⋯
package.jsonadded+265
@@ -0,0 +1,265 @@+{+  "slug": "tc74lcx245fk",+  "version": "0.1.0",+  "type": "component",+  "description": "TOSHIBA Buffers, Drivers, Receivers, Transceivers, VSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "tc74lcx245fk",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tc74lcx245fk.kicad_sym",+    "tc74lcx245fk.kicad_mod",+    "tc74lcx245fk.glb",+    "tc74lcx245fk.step",+    "tc74lcx245fk.lbr",+    "docs/hero.png",+    "docs/tc74lcx245fk-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "tc74lcx245fk-hero.glb",+    "tc74lcx245fk-hero.overlay.json",+    "tc74lcx245fk-etched.glb"+  ],+  "component": {+    "mpn": "TC74LCX245FK",+    "manufacturer": "TOSHIBA",+    "package": "VSSOP-20",+    "pin_count": 20,+    "category": "Logic",+    "subcategory": "Buffers, Drivers, Receivers, Transceivers",+    "datasheet": "https://toshiba.semicon-storage.com/info/docget.jsp?did=63393&prodName=TC74LCX245FK",+    "parts": {+      "symbol": "tc74lcx245fk.kicad_sym",+      "footprint": "tc74lcx245fk.kicad_mod",+      "model_3d": "tc74lcx245fk-hero.glb",+      "model_3d_plain": "tc74lcx245fk-etched.glb",+      "model_3d_step": "tc74lcx245fk-etched.step",+      "model_3d_step_plain": "tc74lcx245fk.step",+      "lbr": "tc74lcx245fk.lbr"+    },+    "distributor_links": {+      "lcsc": "C5156055",+      "mouser": "757-TC74LCX245FK"+    },+    "distributor_check": {+      "checked_at": "2026-10-29T16:40:54Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": "757-TC74LCX245FK",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "DIR",+        "type": "input",+        "description": "Direction control input: a low level selects A-to-B transfer and a high level selects B-to-A transfer, with the input rated 0 to 5.5 V."+      },+      {+        "number": "2",+        "name": "A1",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "3",+        "name": "A2",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "4",+        "name": "A3",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "5",+        "name": "A4",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "6",+        "name": "A5",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "7",+        "name": "A6",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "8",+        "name": "A7",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "9",+        "name": "A8",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the device."+      },+      {+        "number": "11",+        "name": "B8",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "12",+        "name": "B7",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "13",+        "name": "B6",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "14",+        "name": "B5",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "15",+        "name": "B4",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "16",+        "name": "B3",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "17",+        "name": "B2",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "18",+        "name": "B1",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "19",+        "name": "OE",+        "type": "input",+        "description": "Active-low output enable input (rated 0 to 5.5 V); when high, both buses are placed in the high-impedance (Z) state and are effectively isolated."+      },+      {+        "number": "20",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply, 1.65 to 3.6 V for normal operation (designed for 3.3 V systems, with 5 V-tolerant inputs and outputs)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The pin-assignment diagram text on page 2 does not print the 'OE' label next to pin 19. The assignme; The page 2 pin-assignment diagram is garbled in extraction, so the A and B pin numbers were mapped f; GND (10) and VCC (20) are taken from the diagram text. The datasheet does not give a separate descri"+        ],+        "pages_sent": 11,+        "cost_usd": 0.0587,+        "at": "2026-10-29T16:40:47"+      },+      "datasheet": {+        "url": "https://toshiba.semicon-storage.com/info/docget.jsp?did=63393&prodName=TC74LCX245FK",+        "pages": 11,+        "sha256": "9178ff8c884ab13c",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "tc74lcx245fk.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          3.0,+          0.98+        ],+        "zmin_mm": 0.02,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3ae30981ec09737ebb6f891b1cbe0e7dadef82a234d09ab91556e898993420e1",+        "checked": "2026-10-29",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tc74lcx245fk-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          3.0,+          0.98+        ],+        "zmin_mm": 0.02,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f425519b962985b0099e66befc7a45d87fd77049b66c97a167436b4ab248bf8a",+        "checked": "2026-10-29",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}
page.jsonadded+271
@@ -0,0 +1,271 @@+{+  "slug": "tc74lcx245fk",+  "version": "0.1.0",+  "type": "component",+  "description": "TOSHIBA Buffers, Drivers, Receivers, Transceivers, VSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "tc74lcx245fk",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tc74lcx245fk.kicad_sym",+    "tc74lcx245fk.kicad_mod",+    "tc74lcx245fk.glb",+    "tc74lcx245fk.step",+    "tc74lcx245fk.lbr",+    "docs/hero.png",+    "docs/tc74lcx245fk-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "tc74lcx245fk-hero.glb",+    "tc74lcx245fk-hero.overlay.json",+    "tc74lcx245fk-etched.glb"+  ],+  "component": {+    "mpn": "TC74LCX245FK",+    "manufacturer": "TOSHIBA",+    "package": "VSSOP-20",+    "pin_count": 20,+    "category": "Logic",+    "subcategory": "Buffers, Drivers, Receivers, Transceivers",+    "datasheet": "https://toshiba.semicon-storage.com/info/docget.jsp?did=63393&prodName=TC74LCX245FK",+    "parts": {+      "symbol": "tc74lcx245fk.kicad_sym",+      "footprint": "tc74lcx245fk.kicad_mod",+      "model_3d": "tc74lcx245fk-hero.glb",+      "model_3d_plain": "tc74lcx245fk-etched.glb",+      "model_3d_step": "tc74lcx245fk-etched.step",+      "model_3d_step_plain": "tc74lcx245fk.step",+      "lbr": "tc74lcx245fk.lbr"+    },+    "distributor_links": {+      "lcsc": "C5156055",+      "mouser": "757-TC74LCX245FK"+    },+    "distributor_check": {+      "checked_at": "2026-10-29T16:40:54Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": "757-TC74LCX245FK",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "DIR",+        "type": "input",+        "description": "Direction control input: a low level selects A-to-B transfer and a high level selects B-to-A transfer, with the input rated 0 to 5.5 V."+      },+      {+        "number": "2",+        "name": "A1",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "3",+        "name": "A2",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "4",+        "name": "A3",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "5",+        "name": "A4",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "6",+        "name": "A5",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "7",+        "name": "A6",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "8",+        "name": "A7",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "9",+        "name": "A8",+        "type": "bidirectional",+        "description": "A-bus bidirectional I/O that is high impedance when OE is high; do not apply signals to bus pins while they are in output mode, and tie floating bus pins to VCC or GND through pull-up or pull-down resistors."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the device."+      },+      {+        "number": "11",+        "name": "B8",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "12",+        "name": "B7",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "13",+        "name": "B6",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "14",+        "name": "B5",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "15",+        "name": "B4",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "16",+        "name": "B3",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "17",+        "name": "B2",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "18",+        "name": "B1",+        "type": "bidirectional",+        "description": "B-bus bidirectional I/O that is high impedance when OE is high; bus I/O is rated 0 to 5.5 V when the output is off and 0 to VCC when the output is on."+      },+      {+        "number": "19",+        "name": "OE",+        "type": "input",+        "description": "Active-low output enable input (rated 0 to 5.5 V); when high, both buses are placed in the high-impedance (Z) state and are effectively isolated."+      },+      {+        "number": "20",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply, 1.65 to 3.6 V for normal operation (designed for 3.3 V systems, with 5 V-tolerant inputs and outputs)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The pin-assignment diagram text on page 2 does not print the 'OE' label next to pin 19. The assignme; The page 2 pin-assignment diagram is garbled in extraction, so the A and B pin numbers were mapped f; GND (10) and VCC (20) are taken from the diagram text. The datasheet does not give a separate descri"+        ],+        "pages_sent": 11,+        "cost_usd": 0.0587,+        "at": "2026-10-29T16:40:47"+      },+      "datasheet": {+        "url": "https://toshiba.semicon-storage.com/info/docget.jsp?did=63393&prodName=TC74LCX245FK",+        "pages": 11,+        "sha256": "9178ff8c884ab13c",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "tc74lcx245fk.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5,+          3,+          0.98+        ],+        "zmin_mm": 0.02,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "3ae30981ec09737ebb6f891b1cbe0e7dadef82a234d09ab91556e898993420e1",+        "checked": "2026-10-29",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tc74lcx245fk-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5,+          3,+          0.98+        ],+        "zmin_mm": 0.02,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "f425519b962985b0099e66befc7a45d87fd77049b66c97a167436b4ab248bf8a",+        "checked": "2026-10-29",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file
tc74lcx245fk-etched.glbadded
⋯ 1 unchanged line ⋯
tc74lcx245fk-hero.glbadded
⋯ 1 unchanged line ⋯
tc74lcx245fk-hero.overlay.jsonadded+529
@@ -0,0 +1,529 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "TC74LCX245FK",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 20,+      "span_mm": 5.3,+      "dash_mm": 0.1325,+      "gap_mm": 0.0795,+      "pad_stroke_mm": 0.0318+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 1,+      "pin1": {+        "source": "added dot (AI)",+        "pad": "1",+        "center_mm": [+          -2.35,+          2.35+        ],+        "r_mm": 0.1+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 20,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.424,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -2.5,+      2.5,+      -1.5,+      1.5+    ],+    "pads_bbox_mm": [+      -2.65,+      2.65,+      -2.3,+      2.3+    ],+    "seating_z_mm": 0.02+  },+  "sources": {+    "glb": "tc74lcx245fk-etched.glb",+    "glb_sha256": "17d83adfea63c885a88649fb160c1a6aaf9afee0a175a07094964baf370a343f",+    "footprint": "tc74lcx245fk.kicad_mod",+    "footprint_sha256": "ecc6c776cd917e1644dc3369c5170730320d81cafcd626011ac8e08d2028cd1a",+    "pins": "page.json component.pins",+    "pins_sha256": "2fba59b92d2aec48f6d82d4eb75e1ee5ca6ea67d66c435cce8f54347c289ae20"+  },+  "generator": "adom-wiki 1.8.1 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "DIR",+      "x": -2.8,+      "y": 1.855,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "A1",+      "x": -1.75,+      "y": 2.4,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "3",+      "text": "A2",+      "x": -1.25,+      "y": 2.4,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "4",+      "text": "A3",+      "x": -0.75,+      "y": 2.4,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "5",+      "text": "A4",+      "x": -0.25,+      "y": 2.4,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "6",+      "text": "A5",+      "x": 0.25,+      "y": 2.4,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "7",+      "text": "A6",+      "x": 0.75,+      "y": 2.4,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "8",+      "text": "A7",+      "x": 1.25,+      "y": 2.4,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "9",+      "text": "A8",+      "x": 1.75,+      "y": 2.4,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "10",+      "text": "GND",+      "x": 2.8,+      "y": 1.855,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "11",+      "text": "B8",+      "x": 2.8,+      "y": -1.855,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "12",+      "text": "B7",+      "x": 1.75,+      "y": -2.4,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "13",+      "text": "B6",+      "x": 1.25,+      "y": -2.4,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "14",+      "text": "B5",+      "x": 0.75,+      "y": -2.4,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "15",+      "text": "B4",+      "x": 0.25,+      "y": -2.4,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "16",+      "text": "B3",+      "x": -0.25,+      "y": -2.4,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "17",+      "text": "B2",+      "x": -0.75,+      "y": -2.4,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "18",+      "text": "B1",+      "x": -1.25,+      "y": -2.4,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "19",+      "text": "OE",+      "x": -1.75,+      "y": -2.4,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "20",+      "text": "VCC",+      "x": -2.8,+      "y": -1.855,+      "align": "right",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.35,+        1.855+      ],+      "size_mm": [+        0.6,+        0.39+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -1.75,+        1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -1.25,+        1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -0.75,+        1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -0.25,+        1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        0.25,+        1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        0.75,+        1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        1.25,+        1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        1.75,+        1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        2.35,+        1.855+      ],+      "size_mm": [+        0.6,+        0.39+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        2.35,+        -1.855+      ],+      "size_mm": [+        0.6,+        0.39+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        1.75,+        -1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        1.25,+        -1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        0.75,+        -1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        0.25,+        -1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        -0.25,+        -1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        -0.75,+        -1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        -1.25,+        -1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        -1.75,+        -1.955+      ],+      "size_mm": [+        0.3,+        0.69+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        -2.35,+        -1.855+      ],+      "size_mm": [+        0.6,+        0.39+      ],+      "rot": 0.0+    }+  ]+}
tc74lcx245fk.glbadded
⋯ 1 unchanged line ⋯
tc74lcx245fk.kicad_modadded+42
@@ -0,0 +1,42 @@+(footprint "TOSHIBA_TC74"+	(version 20240108)+	(generator "adom_assets")+	(layer "F.Cu")+	(descr "Generated from the TOSHIBA datasheet land pattern (family R506, spec 7eba39f824)")+	(tags "adom generated")+	(attr smd)+	(property "Reference" "REF**" (at 0 -3.55 0) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))))+	(property "Value" "TOSHIBA_TC74" (at 0 3.55 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))))+	(fp_line (start -2.5 -1.5) (end 2.5 -1.5) (stroke (width 0.1) (type solid)) (layer "F.Fab"))+	(fp_line (start 2.5 -1.5) (end 2.5 1.5) (stroke (width 0.1) (type solid)) (layer "F.Fab"))+	(fp_line (start 2.5 1.5) (end -2.5 1.5) (stroke (width 0.1) (type solid)) (layer "F.Fab"))+	(fp_line (start -2.5 1.5) (end -2.5 -1.5) (stroke (width 0.1) (type solid)) (layer "F.Fab"))+	(fp_line (start -3.05 1.66) (end -3.05 2.05) (stroke (width 0.12) (type solid)) (layer "F.SilkS"))+	(pad "1" smd roundrect (at -2.35 1.855) (size 0.6 0.39) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "2" smd roundrect (at -1.75 1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "3" smd roundrect (at -1.25 1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "4" smd roundrect (at -0.75 1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "5" smd roundrect (at -0.25 1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "6" smd roundrect (at 0.25 1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "7" smd roundrect (at 0.75 1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "8" smd roundrect (at 1.25 1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "9" smd roundrect (at 1.75 1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "10" smd roundrect (at 2.35 1.855) (size 0.6 0.39) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "11" smd roundrect (at 2.35 -1.855) (size 0.6 0.39) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "12" smd roundrect (at 1.75 -1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "13" smd roundrect (at 1.25 -1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "14" smd roundrect (at 0.75 -1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "15" smd roundrect (at 0.25 -1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "16" smd roundrect (at -0.25 -1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "17" smd roundrect (at -0.75 -1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "18" smd roundrect (at -1.25 -1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "19" smd roundrect (at -1.75 -1.955) (size 0.3 0.69) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(pad "20" smd roundrect (at -2.35 -1.855) (size 0.6 0.39) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+	(model "${ADOM_GEN_3D}/Adom_Gen.3dshapes/TOSHIBA_TC74.step" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)))+	(fp_poly+		(pts (xy -2.90 -2.30) (xy -2.15 -2.30) (xy -2.15 -2.55) (xy 2.15 -2.55) (xy 2.15 -2.30) (xy 2.90 -2.30) (xy 2.90 -1.41) (xy 2.75 -1.41) (xy 2.75 1.41) (xy 2.90 1.41) (xy 2.90 2.30) (xy 2.15 2.30) (xy 2.15 2.55) (xy -2.15 2.55) (xy -2.15 2.30) (xy -2.90 2.30) (xy -2.90 1.41) (xy -2.75 1.41) (xy -2.75 -1.41) (xy -2.90 -1.41))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	)+)
tc74lcx245fk.kicad_symadded+93
@@ -0,0 +1,93 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+  (symbol "TC74LCX245FK" (in_bom yes) (on_board yes)+    (property "Reference" "U" (at 0 15.24 0) (effects (font (size 1.27 1.27))))+    (property "Value" "TC74LCX245FK" (at 0 -17.78 0) (effects (font (size 1.27 1.27))))+    (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+    (symbol "TC74LCX245FK_0_1"+    (rectangle (start -12.70 12.70) (end 12.70 -15.24)+      (stroke (width 0.254) (type default)) (fill (type background)))+    )+    (symbol "TC74LCX245FK_1_1"+    (pin input line (at -17.78 10.16 0) (length 5.08)+      (name "DIR" (effects (font (size 1.27 1.27))))+      (number "1" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 7.62 0) (length 5.08)+      (name "A1" (effects (font (size 1.27 1.27))))+      (number "2" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 5.08 0) (length 5.08)+      (name "A2" (effects (font (size 1.27 1.27))))+      (number "3" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 2.54 0) (length 5.08)+      (name "A3" (effects (font (size 1.27 1.27))))+      (number "4" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 0.00 0) (length 5.08)+      (name "A4" (effects (font (size 1.27 1.27))))+      (number "5" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -2.54 0) (length 5.08)+      (name "A5" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)+      (name "A6" (effects (font (size 1.27 1.27))))+      (number "7" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+      (name "A7" (effects (font (size 1.27 1.27))))+      (number "8" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -10.16 0) (length 5.08)+      (name "A8" (effects (font (size 1.27 1.27))))+      (number "9" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 -12.70 0) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "10" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 10.16 180) (length 5.08)+      (name "VCC" (effects (font (size 1.27 1.27))))+      (number "20" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 7.62 180) (length 5.08)+      (name "OE" (effects (font (size 1.27 1.27))))+      (number "19" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 5.08 180) (length 5.08)+      (name "B1" (effects (font (size 1.27 1.27))))+      (number "18" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 2.54 180) (length 5.08)+      (name "B2" (effects (font (size 1.27 1.27))))+      (number "17" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 0.00 180) (length 5.08)+      (name "B3" (effects (font (size 1.27 1.27))))+      (number "16" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)+      (name "B4" (effects (font (size 1.27 1.27))))+      (number "15" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)+      (name "B5" (effects (font (size 1.27 1.27))))+      (number "14" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)+      (name "B6" (effects (font (size 1.27 1.27))))+      (number "13" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -10.16 180) (length 5.08)+      (name "B7" (effects (font (size 1.27 1.27))))+      (number "12" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -12.70 180) (length 5.08)+      (name "B8" (effects (font (size 1.27 1.27))))+      (number "11" (effects (font (size 1.27 1.27))))+    )+    )+  )+)
tc74lcx245fk.lbradded+153
@@ -0,0 +1,153 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="TOSHIBA_TC74">+  <description>20 pads, 5.3 x 4.6 mm. Generated from the TOSHIBA datasheet land pattern (family R506, spec 7eba39f824)</description>+  <smd name="1" x="-2.3500" y="-1.8550" dx="0.6000" dy="0.3900" layer="1" roundness="50"/>+  <smd name="2" x="-1.7500" y="-1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="3" x="-1.2500" y="-1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="4" x="-0.7500" y="-1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="5" x="-0.2500" y="-1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="6" x="0.2500" y="-1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="7" x="0.7500" y="-1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="8" x="1.2500" y="-1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="9" x="1.7500" y="-1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="10" x="2.3500" y="-1.8550" dx="0.6000" dy="0.3900" layer="1" roundness="50"/>+  <smd name="11" x="2.3500" y="1.8550" dx="0.6000" dy="0.3900" layer="1" roundness="50"/>+  <smd name="12" x="1.7500" y="1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="13" x="1.2500" y="1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="14" x="0.7500" y="1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="15" x="0.2500" y="1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="16" x="-0.2500" y="1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="17" x="-0.7500" y="1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="18" x="-1.2500" y="1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="19" x="-1.7500" y="1.9550" dx="0.3000" dy="0.6900" layer="1" roundness="50"/>+  <smd name="20" x="-2.3500" y="1.8550" dx="0.6000" dy="0.3900" layer="1" roundness="50"/>+  <wire x1="-2.5000" y1="1.5000" x2="2.5000" y2="1.5000" width="0.1000" layer="51"/>+  <wire x1="2.5000" y1="1.5000" x2="2.5000" y2="-1.5000" width="0.1000" layer="51"/>+  <wire x1="2.5000" y1="-1.5000" x2="-2.5000" y2="-1.5000" width="0.1000" layer="51"/>+  <wire x1="-2.5000" y1="-1.5000" x2="-2.5000" y2="1.5000" width="0.1000" layer="51"/>+  <wire x1="-3.0500" y1="-1.6600" x2="-3.0500" y2="-2.0500" width="0.1200" layer="21"/>+  <text x="0" y="2.900" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-2.900" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="TC74LCX245FK">+  <wire x1="-12.7" y1="12.7" x2="12.7" y2="12.7" width="0.254" layer="94"/>+  <wire x1="12.7" y1="12.7" x2="12.7" y2="-15.24" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-15.24" x2="-12.7" y2="-15.24" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-15.24" x2="-12.7" y2="12.7" width="0.254" layer="94"/>+  <text x="0.0000" y="15.2400" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-17.7800" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="DIR" x="-17.78" y="10.16" length="middle" direction="in"/>+  <pin name="A1" x="-17.78" y="7.62" length="middle" direction="io"/>+  <pin name="A2" x="-17.78" y="5.08" length="middle" direction="io"/>+  <pin name="A3" x="-17.78" y="2.54" length="middle" direction="io"/>+  <pin name="A4" x="-17.78" y="0" length="middle" direction="io"/>+  <pin name="A5" x="-17.78" y="-2.54" length="middle" direction="io"/>+  <pin name="A6" x="-17.78" y="-5.08" length="middle" direction="io"/>+  <pin name="A7" x="-17.78" y="-7.62" length="middle" direction="io"/>+  <pin name="A8" x="-17.78" y="-10.16" length="middle" direction="io"/>+  <pin name="GND" x="-17.78" y="-12.7" length="middle" direction="pwr"/>+  <pin name="VCC" x="17.78" y="10.16" length="middle" direction="pwr" rot="R180"/>+  <pin name="OE" x="17.78" y="7.62" length="middle" direction="in" rot="R180"/>+  <pin name="B1" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>+  <pin name="B2" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>+  <pin name="B3" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+  <pin name="B4" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+  <pin name="B5" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>+  <pin name="B6" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>+  <pin name="B7" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>+  <pin name="B8" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="TC74LCX245FK" prefix="U">+  <description></description>+  <gates>+    <gate name="G$1" symbol="TC74LCX245FK" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="TOSHIBA_TC74">+      <connects>+        <connect gate="G$1" pin="DIR" pad="1"/>+        <connect gate="G$1" pin="A1" pad="2"/>+        <connect gate="G$1" pin="A2" pad="3"/>+        <connect gate="G$1" pin="A3" pad="4"/>+        <connect gate="G$1" pin="A4" pad="5"/>+        <connect gate="G$1" pin="A5" pad="6"/>+        <connect gate="G$1" pin="A6" pad="7"/>+        <connect gate="G$1" pin="A7" pad="8"/>+        <connect gate="G$1" pin="A8" pad="9"/>+        <connect gate="G$1" pin="GND" pad="10"/>+        <connect gate="G$1" pin="VCC" pad="20"/>+        <connect gate="G$1" pin="OE" pad="19"/>+        <connect gate="G$1" pin="B1" pad="18"/>+        <connect gate="G$1" pin="B2" pad="17"/>+        <connect gate="G$1" pin="B3" pad="16"/>+        <connect gate="G$1" pin="B4" pad="15"/>+        <connect gate="G$1" pin="B5" pad="14"/>+        <connect gate="G$1" pin="B6" pad="13"/>+        <connect gate="G$1" pin="B7" pad="12"/>+        <connect gate="G$1" pin="B8" pad="11"/>+      </connects>+      <technologies><technology name=""/></technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file
tc74lcx245fk.stepadded+1000
@@ -0,0 +1,1000 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-10-29T16:39:49',('Author'),(+    'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+  ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+  'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+  'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('TOSHIBA_TC74','TOSHIBA_TC74','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#655),#753);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#137,#218,#299,#348,#397,#429,#478,#562,#589,+    #596,#651));+#17 = ADVANCED_FACE('',(#18),#32,.F.);+#18 = FACE_BOUND('',#19,.F.);+#19 = EDGE_LOOP('',(#20,#55,#83,#111));+#20 = ORIENTED_EDGE('',*,*,#21,.F.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(-2.5,-1.5,2.E-02));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(-2.5,-1.5,0.92));+#26 = SURFACE_CURVE('',#27,(#31,#43),.PCURVE_S1.);+#27 = LINE('',#28,#29);+#28 = CARTESIAN_POINT('',(-2.5,-1.5,2.E-02));+#29 = VECTOR('',#30,1.);+#30 = DIRECTION('',(0.,0.,1.));+#31 = PCURVE('',#32,#37);+#32 = PLANE('',#33);+#33 = AXIS2_PLACEMENT_3D('',#34,#35,#36);+#34 = CARTESIAN_POINT('',(-2.5,-1.5,2.E-02));+#35 = DIRECTION('',(1.,0.,0.));+#36 = DIRECTION('',(0.,0.,1.));+#37 = DEFINITIONAL_REPRESENTATION('',(#38),#42);+#38 = LINE('',#39,#40);+#39 = CARTESIAN_POINT('',(0.,0.));+#40 = VECTOR('',#41,1.);+#41 = DIRECTION('',(1.,0.));+#42 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#43 = PCURVE('',#44,#49);+#44 = PLANE('',#45);+#45 = AXIS2_PLACEMENT_3D('',#46,#47,#48);+#46 = CARTESIAN_POINT('',(-2.5,-1.5,2.E-02));+#47 = DIRECTION('',(0.,1.,0.));+#48 = DIRECTION('',(0.,0.,1.));+#49 = DEFINITIONAL_REPRESENTATION('',(#50),#54);+#50 = LINE('',#51,#52);+#51 = CARTESIAN_POINT('',(0.,0.));+#52 = VECTOR('',#53,1.);+#53 = DIRECTION('',(1.,0.));+#54 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#55 = ORIENTED_EDGE('',*,*,#56,.T.);+#56 = EDGE_CURVE('',#22,#57,#59,.T.);+#57 = VERTEX_POINT('',#58);+#58 = CARTESIAN_POINT('',(-2.5,1.5,2.E-02));+#59 = SURFACE_CURVE('',#60,(#64,#71),.PCURVE_S1.);+#60 = LINE('',#61,#62);+#61 = CARTESIAN_POINT('',(-2.5,-1.5,2.E-02));+#62 = VECTOR('',#63,1.);+#63 = DIRECTION('',(0.,1.,0.));+#64 = PCURVE('',#32,#65);+#65 = DEFINITIONAL_REPRESENTATION('',(#66),#70);+#66 = LINE('',#67,#68);+#67 = CARTESIAN_POINT('',(0.,0.));+#68 = VECTOR('',#69,1.);+#69 = DIRECTION('',(0.,-1.));+#70 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#71 = PCURVE('',#72,#77);+#72 = PLANE('',#73);+#73 = AXIS2_PLACEMENT_3D('',#74,#75,#76);+#74 = CARTESIAN_POINT('',(-2.5,-1.5,2.E-02));+#75 = DIRECTION('',(0.,0.,1.));+#76 = DIRECTION('',(1.,0.,0.));+#77 = DEFINITIONAL_REPRESENTATION('',(#78),#82);+#78 = LINE('',#79,#80);+#79 = CARTESIAN_POINT('',(0.,0.));+#80 = VECTOR('',#81,1.);+#81 = DIRECTION('',(0.,1.));+#82 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#83 = ORIENTED_EDGE('',*,*,#84,.T.);+#84 = EDGE_CURVE('',#57,#85,#87,.T.);+#85 = VERTEX_POINT('',#86);+#86 = CARTESIAN_POINT('',(-2.5,1.5,0.92));+#87 = SURFACE_CURVE('',#88,(#92,#99),.PCURVE_S1.);+#88 = LINE('',#89,#90);+#89 = CARTESIAN_POINT('',(-2.5,1.5,2.E-02));+#90 = VECTOR('',#91,1.);+#91 = DIRECTION('',(0.,0.,1.));+#92 = PCURVE('',#32,#93);+#93 = DEFINITIONAL_REPRESENTATION('',(#94),#98);+#94 = LINE('',#95,#96);+#95 = CARTESIAN_POINT('',(0.,-3.));+#96 = VECTOR('',#97,1.);+#97 = DIRECTION('',(1.,0.));+#98 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#99 = PCURVE('',#100,#105);+#100 = PLANE('',#101);+#101 = AXIS2_PLACEMENT_3D('',#102,#103,#104);+#102 = CARTESIAN_POINT('',(-2.5,1.5,2.E-02));+#103 = DIRECTION('',(0.,1.,0.));+#104 = DIRECTION('',(0.,0.,1.));+#105 = DEFINITIONAL_REPRESENTATION('',(#106),#110);+#106 = LINE('',#107,#108);+#107 = CARTESIAN_POINT('',(0.,0.));+#108 = VECTOR('',#109,1.);+#109 = DIRECTION('',(1.,0.));+#110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#111 = ORIENTED_EDGE('',*,*,#112,.F.);+#112 = EDGE_CURVE('',#24,#85,#113,.T.);+#113 = SURFACE_CURVE('',#114,(#118,#125),.PCURVE_S1.);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(-2.5,-1.5,0.92));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(0.,1.,0.));+#118 = PCURVE('',#32,#119);+#119 = DEFINITIONAL_REPRESENTATION('',(#120),#124);+#120 = LINE('',#121,#122);+#121 = CARTESIAN_POINT('',(0.9,0.));+#122 = VECTOR('',#123,1.);+#123 = DIRECTION('',(0.,-1.));+#124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#125 = PCURVE('',#126,#131);+#126 = PLANE('',#127);+#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130);+#128 = CARTESIAN_POINT('',(-2.46,-1.5,0.96));+#129 = DIRECTION('',(0.707106781187,8.674172473628E-19,-0.707106781187)+  );+#130 = DIRECTION('',(-6.133566177284E-19,1.,6.133566177284E-19));+#131 = DEFINITIONAL_REPRESENTATION('',(#132),#136);+#132 = LINE('',#133,#134);+#133 = CARTESIAN_POINT('',(0.,-5.656854249492E-02));+#134 = VECTOR('',#135,1.);+#135 = DIRECTION('',(1.,0.));+#136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#137 = ADVANCED_FACE('',(#138),#44,.F.);+#138 = FACE_BOUND('',#139,.F.);+#139 = EDGE_LOOP('',(#140,#170,#191,#192));+#140 = ORIENTED_EDGE('',*,*,#141,.F.);+#141 = EDGE_CURVE('',#142,#144,#146,.T.);+#142 = VERTEX_POINT('',#143);+#143 = CARTESIAN_POINT('',(2.5,-1.5,2.E-02));+#144 = VERTEX_POINT('',#145);+#145 = CARTESIAN_POINT('',(2.5,-1.5,0.92));+#146 = SURFACE_CURVE('',#147,(#151,#158),.PCURVE_S1.);+#147 = LINE('',#148,#149);+#148 = CARTESIAN_POINT('',(2.5,-1.5,2.E-02));+#149 = VECTOR('',#150,1.);+#150 = DIRECTION('',(0.,0.,1.));+#151 = PCURVE('',#44,#152);+#152 = DEFINITIONAL_REPRESENTATION('',(#153),#157);+#153 = LINE('',#154,#155);+#154 = CARTESIAN_POINT('',(0.,5.));+#155 = VECTOR('',#156,1.);+#156 = DIRECTION('',(1.,0.));+#157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#158 = PCURVE('',#159,#164);+#159 = PLANE('',#160);+#160 = AXIS2_PLACEMENT_3D('',#161,#162,#163);+#161 = CARTESIAN_POINT('',(2.5,-1.5,2.E-02));+#162 = DIRECTION('',(1.,0.,0.));+#163 = DIRECTION('',(0.,0.,1.));+#164 = DEFINITIONAL_REPRESENTATION('',(#165),#169);+#165 = LINE('',#166,#167);+#166 = CARTESIAN_POINT('',(0.,0.));+#167 = VECTOR('',#168,1.);+#168 = DIRECTION('',(1.,0.));+#169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#170 = ORIENTED_EDGE('',*,*,#171,.F.);+#171 = EDGE_CURVE('',#22,#142,#172,.T.);+#172 = SURFACE_CURVE('',#173,(#177,#184),.PCURVE_S1.);+#173 = LINE('',#174,#175);+#174 = CARTESIAN_POINT('',(-2.5,-1.5,2.E-02));+#175 = VECTOR('',#176,1.);+#176 = DIRECTION('',(1.,0.,0.));+#177 = PCURVE('',#44,#178);+#178 = DEFINITIONAL_REPRESENTATION('',(#179),#183);+#179 = LINE('',#180,#181);+#180 = CARTESIAN_POINT('',(0.,0.));+#181 = VECTOR('',#182,1.);+#182 = DIRECTION('',(0.,1.));+#183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#184 = PCURVE('',#72,#185);+#185 = DEFINITIONAL_REPRESENTATION('',(#186),#190);+#186 = LINE('',#187,#188);+#187 = CARTESIAN_POINT('',(0.,0.));+#188 = VECTOR('',#189,1.);+#189 = DIRECTION('',(1.,0.));+#190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#191 = ORIENTED_EDGE('',*,*,#21,.T.);+#192 = ORIENTED_EDGE('',*,*,#193,.T.);+#193 = EDGE_CURVE('',#24,#144,#194,.T.);+#194 = SURFACE_CURVE('',#195,(#199,#206),.PCURVE_S1.);+#195 = LINE('',#196,#197);+#196 = CARTESIAN_POINT('',(-2.5,-1.5,0.92));+#197 = VECTOR('',#198,1.);+#198 = DIRECTION('',(1.,0.,0.));+#199 = PCURVE('',#44,#200);+#200 = DEFINITIONAL_REPRESENTATION('',(#201),#205);+#201 = LINE('',#202,#203);+#202 = CARTESIAN_POINT('',(0.9,0.));+#203 = VECTOR('',#204,1.);+#204 = DIRECTION('',(0.,1.));+#205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#206 = PCURVE('',#207,#212);+#207 = PLANE('',#208);+#208 = AXIS2_PLACEMENT_3D('',#209,#210,#211);+#209 = CARTESIAN_POINT('',(-2.5,-1.46,0.96));+#210 = DIRECTION('',(-8.674172473628E-19,0.707106781187,-0.707106781187)+  );+#211 = DIRECTION('',(-1.,-6.133566177284E-19,6.133566177284E-19));+#212 = DEFINITIONAL_REPRESENTATION('',(#213),#217);+#213 = LINE('',#214,#215);+#214 = CARTESIAN_POINT('',(0.,-5.656854249492E-02));+#215 = VECTOR('',#216,1.);+#216 = DIRECTION('',(-1.,0.));+#217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#218 = ADVANCED_FACE('',(#219),#126,.F.);+#219 = FACE_BOUND('',#220,.F.);+#220 = EDGE_LOOP('',(#221,#244,#245,#273));+#221 = ORIENTED_EDGE('',*,*,#222,.F.);+#222 = EDGE_CURVE('',#24,#223,#225,.T.);+#223 = VERTEX_POINT('',#224);+#224 = CARTESIAN_POINT('',(-2.42,-1.42,1.));+#225 = SURFACE_CURVE('',#226,(#230,#237),.PCURVE_S1.);+#226 = LINE('',#227,#228);+#227 = CARTESIAN_POINT('',(-2.473333333333,-1.473333333333,+    0.946666666667));+#228 = VECTOR('',#229,1.);+#229 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919));+#230 = PCURVE('',#126,#231);+#231 = DEFINITIONAL_REPRESENTATION('',(#232),#236);+#232 = LINE('',#233,#234);+#233 = CARTESIAN_POINT('',(2.6666666667E-02,-1.885618083117E-02));+#234 = VECTOR('',#235,1.);+#235 = DIRECTION('',(0.57735026919,0.816496580928));+#236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#237 = PCURVE('',#207,#238);+#238 = DEFINITIONAL_REPRESENTATION('',(#239),#243);+#239 = LINE('',#240,#241);+#240 = CARTESIAN_POINT('',(-2.6666666667E-02,-1.885618083117E-02));+#241 = VECTOR('',#242,1.);+#242 = DIRECTION('',(-0.57735026919,0.816496580928));+#243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#244 = ORIENTED_EDGE('',*,*,#112,.T.);+#245 = ORIENTED_EDGE('',*,*,#246,.T.);+#246 = EDGE_CURVE('',#85,#247,#249,.T.);+#247 = VERTEX_POINT('',#248);+#248 = CARTESIAN_POINT('',(-2.42,1.42,1.));+#249 = SURFACE_CURVE('',#250,(#254,#261),.PCURVE_S1.);+#250 = LINE('',#251,#252);+#251 = CARTESIAN_POINT('',(-1.973333333333,0.973333333333,1.446666666667+    ));+#252 = VECTOR('',#253,1.);+#253 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919));+#254 = PCURVE('',#126,#255);+#255 = DEFINITIONAL_REPRESENTATION('',(#256),#260);+#256 = LINE('',#257,#258);+#257 = CARTESIAN_POINT('',(2.473333333333,0.688250600355));+#258 = VECTOR('',#259,1.);+#259 = DIRECTION('',(-0.57735026919,0.816496580928));+#260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#261 = PCURVE('',#262,#267);+#262 = PLANE('',#263);+#263 = AXIS2_PLACEMENT_3D('',#264,#265,#266);+#264 = CARTESIAN_POINT('',(-2.5,1.46,0.96));+#265 = DIRECTION('',(8.674172473628E-19,0.707106781187,0.707106781187));+#266 = DIRECTION('',(-1.,6.133566177284E-19,6.133566177284E-19));+#267 = DEFINITIONAL_REPRESENTATION('',(#268),#272);+#268 = LINE('',#269,#270);+#269 = CARTESIAN_POINT('',(-0.526666666667,0.688250600355));+#270 = VECTOR('',#271,1.);+#271 = DIRECTION('',(-0.57735026919,0.816496580928));+#272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#273 = ORIENTED_EDGE('',*,*,#274,.F.);+#274 = EDGE_CURVE('',#223,#247,#275,.T.);+#275 = SURFACE_CURVE('',#276,(#280,#287),.PCURVE_S1.);+#276 = LINE('',#277,#278);+#277 = CARTESIAN_POINT('',(-2.42,-1.5,1.));+#278 = VECTOR('',#279,1.);+#279 = DIRECTION('',(0.,1.,0.));+#280 = PCURVE('',#126,#281);+#281 = DEFINITIONAL_REPRESENTATION('',(#282),#286);+#282 = LINE('',#283,#284);+#283 = CARTESIAN_POINT('',(0.,5.656854249492E-02));+#284 = VECTOR('',#285,1.);+#285 = DIRECTION('',(1.,0.));+#286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#287 = PCURVE('',#288,#293);+#288 = PLANE('',#289);+#289 = AXIS2_PLACEMENT_3D('',#290,#291,#292);+#290 = CARTESIAN_POINT('',(-2.5,-1.5,1.));+#291 = DIRECTION('',(0.,0.,1.));+#292 = DIRECTION('',(1.,0.,0.));+#293 = DEFINITIONAL_REPRESENTATION('',(#294),#298);+#294 = LINE('',#295,#296);+#295 = CARTESIAN_POINT('',(8.E-02,0.));+#296 = VECTOR('',#297,1.);+#297 = DIRECTION('',(0.,1.));+#298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#299 = ADVANCED_FACE('',(#300),#72,.F.);+#300 = FACE_BOUND('',#301,.F.);+#301 = EDGE_LOOP('',(#302,#303,#304,#327));+#302 = ORIENTED_EDGE('',*,*,#56,.F.);+#303 = ORIENTED_EDGE('',*,*,#171,.T.);+#304 = ORIENTED_EDGE('',*,*,#305,.T.);+#305 = EDGE_CURVE('',#142,#306,#308,.T.);+#306 = VERTEX_POINT('',#307);+#307 = CARTESIAN_POINT('',(2.5,1.5,2.E-02));+#308 = SURFACE_CURVE('',#309,(#313,#320),.PCURVE_S1.);+#309 = LINE('',#310,#311);+#310 = CARTESIAN_POINT('',(2.5,-1.5,2.E-02));+#311 = VECTOR('',#312,1.);+#312 = DIRECTION('',(0.,1.,0.));+#313 = PCURVE('',#72,#314);+#314 = DEFINITIONAL_REPRESENTATION('',(#315),#319);+#315 = LINE('',#316,#317);+#316 = CARTESIAN_POINT('',(5.,0.));+#317 = VECTOR('',#318,1.);+#318 = DIRECTION('',(0.,1.));+#319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#320 = PCURVE('',#159,#321);+#321 = DEFINITIONAL_REPRESENTATION('',(#322),#326);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(0.,0.));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(0.,-1.));+#326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#327 = ORIENTED_EDGE('',*,*,#328,.F.);+#328 = EDGE_CURVE('',#57,#306,#329,.T.);+#329 = SURFACE_CURVE('',#330,(#334,#341),.PCURVE_S1.);+#330 = LINE('',#331,#332);+#331 = CARTESIAN_POINT('',(-2.5,1.5,2.E-02));+#332 = VECTOR('',#333,1.);+#333 = DIRECTION('',(1.,0.,0.));+#334 = PCURVE('',#72,#335);+#335 = DEFINITIONAL_REPRESENTATION('',(#336),#340);+#336 = LINE('',#337,#338);+#337 = CARTESIAN_POINT('',(0.,3.));+#338 = VECTOR('',#339,1.);+#339 = DIRECTION('',(1.,0.));+#340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#341 = PCURVE('',#100,#342);+#342 = DEFINITIONAL_REPRESENTATION('',(#343),#347);+#343 = LINE('',#344,#345);+#344 = CARTESIAN_POINT('',(0.,0.));+#345 = VECTOR('',#346,1.);+#346 = DIRECTION('',(0.,1.));+#347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#348 = ADVANCED_FACE('',(#349),#100,.T.);+#349 = FACE_BOUND('',#350,.T.);+#350 = EDGE_LOOP('',(#351,#374,#375,#376));+#351 = ORIENTED_EDGE('',*,*,#352,.F.);+#352 = EDGE_CURVE('',#306,#353,#355,.T.);+#353 = VERTEX_POINT('',#354);+#354 = CARTESIAN_POINT('',(2.5,1.5,0.92));+#355 = SURFACE_CURVE('',#356,(#360,#367),.PCURVE_S1.);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(2.5,1.5,2.E-02));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(0.,0.,1.));+#360 = PCURVE('',#100,#361);+#361 = DEFINITIONAL_REPRESENTATION('',(#362),#366);+#362 = LINE('',#363,#364);+#363 = CARTESIAN_POINT('',(0.,5.));+#364 = VECTOR('',#365,1.);+#365 = DIRECTION('',(1.,0.));+#366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#367 = PCURVE('',#159,#368);+#368 = DEFINITIONAL_REPRESENTATION('',(#369),#373);+#369 = LINE('',#370,#371);+#370 = CARTESIAN_POINT('',(0.,-3.));+#371 = VECTOR('',#372,1.);+#372 = DIRECTION('',(1.,0.));+#373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#374 = ORIENTED_EDGE('',*,*,#328,.F.);+#375 = ORIENTED_EDGE('',*,*,#84,.T.);+#376 = ORIENTED_EDGE('',*,*,#377,.T.);+#377 = EDGE_CURVE('',#85,#353,#378,.T.);+#378 = SURFACE_CURVE('',#379,(#383,#390),.PCURVE_S1.);+#379 = LINE('',#380,#381);+#380 = CARTESIAN_POINT('',(-2.5,1.5,0.92));+#381 = VECTOR('',#382,1.);+#382 = DIRECTION('',(1.,0.,0.));+#383 = PCURVE('',#100,#384);+#384 = DEFINITIONAL_REPRESENTATION('',(#385),#389);+#385 = LINE('',#386,#387);+#386 = CARTESIAN_POINT('',(0.9,0.));+#387 = VECTOR('',#388,1.);+#388 = DIRECTION('',(0.,1.));+#389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#390 = PCURVE('',#262,#391);+#391 = DEFINITIONAL_REPRESENTATION('',(#392),#396);+#392 = LINE('',#393,#394);+#393 = CARTESIAN_POINT('',(0.,-5.656854249492E-02));+#394 = VECTOR('',#395,1.);+#395 = DIRECTION('',(-1.,0.));+#396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#397 = ADVANCED_FACE('',(#398),#159,.T.);+#398 = FACE_BOUND('',#399,.T.);+#399 = EDGE_LOOP('',(#400,#401,#402,#403));+#400 = ORIENTED_EDGE('',*,*,#141,.F.);+#401 = ORIENTED_EDGE('',*,*,#305,.T.);+#402 = ORIENTED_EDGE('',*,*,#352,.T.);+#403 = ORIENTED_EDGE('',*,*,#404,.F.);+#404 = EDGE_CURVE('',#144,#353,#405,.T.);+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(2.5,-1.5,0.92));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(0.,1.,0.));+#410 = PCURVE('',#159,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(0.9,0.));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(0.,-1.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(2.46,-1.5,0.96));+#421 = DIRECTION('',(0.707106781187,-8.674172473628E-19,0.707106781187)+  );+#422 = DIRECTION('',(6.133566177284E-19,1.,6.133566177284E-19));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(0.,-5.656854249492E-02));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(1.,0.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#429 = ADVANCED_FACE('',(#430),#207,.F.);+#430 = FACE_BOUND('',#431,.T.);+#431 = EDGE_LOOP('',(#432,#433,#434,#457));+#432 = ORIENTED_EDGE('',*,*,#222,.F.);+#433 = ORIENTED_EDGE('',*,*,#193,.T.);+#434 = ORIENTED_EDGE('',*,*,#435,.T.);+#435 = EDGE_CURVE('',#144,#436,#438,.T.);+#436 = VERTEX_POINT('',#437);+#437 = CARTESIAN_POINT('',(2.42,-1.42,1.));+#438 = SURFACE_CURVE('',#439,(#443,#450),.PCURVE_S1.);+#439 = LINE('',#440,#441);+#440 = CARTESIAN_POINT('',(1.64,-0.64,1.78));+#441 = VECTOR('',#442,1.);+#442 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919));+#443 = PCURVE('',#207,#444);+#444 = DEFINITIONAL_REPRESENTATION('',(#445),#449);+#445 = LINE('',#446,#447);+#446 = CARTESIAN_POINT('',(-4.14,1.159655121146));+#447 = VECTOR('',#448,1.);+#448 = DIRECTION('',(0.57735026919,0.816496580928));+#449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#450 = PCURVE('',#418,#451);+#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.86,1.159655121146));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(0.57735026919,0.816496580928));+#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#457 = ORIENTED_EDGE('',*,*,#458,.F.);+#458 = EDGE_CURVE('',#223,#436,#459,.T.);+#459 = SURFACE_CURVE('',#460,(#464,#471),.PCURVE_S1.);+#460 = LINE('',#461,#462);+#461 = CARTESIAN_POINT('',(-2.5,-1.42,1.));+#462 = VECTOR('',#463,1.);+#463 = DIRECTION('',(1.,0.,0.));+#464 = PCURVE('',#207,#465);+#465 = DEFINITIONAL_REPRESENTATION('',(#466),#470);+#466 = LINE('',#467,#468);+#467 = CARTESIAN_POINT('',(0.,5.656854249492E-02));+#468 = VECTOR('',#469,1.);+#469 = DIRECTION('',(-1.,0.));+#470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#471 = PCURVE('',#288,#472);+#472 = DEFINITIONAL_REPRESENTATION('',(#473),#477);+#473 = LINE('',#474,#475);+#474 = CARTESIAN_POINT('',(0.,8.E-02));+#475 = VECTOR('',#476,1.);+#476 = DIRECTION('',(1.,0.));+#477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#478 = ADVANCED_FACE('',(#479,#527),#288,.T.);+#479 = FACE_BOUND('',#480,.T.);+#480 = EDGE_LOOP('',(#481,#482,#483,#506));+#481 = ORIENTED_EDGE('',*,*,#274,.F.);+#482 = ORIENTED_EDGE('',*,*,#458,.T.);+#483 = ORIENTED_EDGE('',*,*,#484,.T.);+#484 = EDGE_CURVE('',#436,#485,#487,.T.);+#485 = VERTEX_POINT('',#486);+#486 = CARTESIAN_POINT('',(2.42,1.42,1.));+#487 = SURFACE_CURVE('',#488,(#492,#499),.PCURVE_S1.);+#488 = LINE('',#489,#490);+#489 = CARTESIAN_POINT('',(2.42,-1.5,1.));+#490 = VECTOR('',#491,1.);+#491 = DIRECTION('',(0.,1.,0.));+#492 = PCURVE('',#288,#493);+#493 = DEFINITIONAL_REPRESENTATION('',(#494),#498);+#494 = LINE('',#495,#496);+#495 = CARTESIAN_POINT('',(4.92,0.));+#496 = VECTOR('',#497,1.);+#497 = DIRECTION('',(0.,1.));+#498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#499 = PCURVE('',#418,#500);+#500 = DEFINITIONAL_REPRESENTATION('',(#501),#505);+#501 = LINE('',#502,#503);+#502 = CARTESIAN_POINT('',(0.,5.656854249492E-02));+#503 = VECTOR('',#504,1.);+#504 = DIRECTION('',(1.,0.));+#505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#506 = ORIENTED_EDGE('',*,*,#507,.F.);+#507 = EDGE_CURVE('',#247,#485,#508,.T.);+#508 = SURFACE_CURVE('',#509,(#513,#520),.PCURVE_S1.);+#509 = LINE('',#510,#511);+#510 = CARTESIAN_POINT('',(-2.5,1.42,1.));+#511 = VECTOR('',#512,1.);+#512 = DIRECTION('',(1.,0.,0.));+#513 = PCURVE('',#288,#514);+#514 = DEFINITIONAL_REPRESENTATION('',(#515),#519);+#515 = LINE('',#516,#517);+#516 = CARTESIAN_POINT('',(0.,2.92));+#517 = VECTOR('',#518,1.);+#518 = DIRECTION('',(1.,0.));+#519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#520 = PCURVE('',#262,#521);+#521 = DEFINITIONAL_REPRESENTATION('',(#522),#526);+#522 = LINE('',#523,#524);+#523 = CARTESIAN_POINT('',(0.,5.656854249492E-02));+#524 = VECTOR('',#525,1.);+#525 = DIRECTION('',(-1.,0.));+#526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#527 = FACE_BOUND('',#528,.T.);+#528 = EDGE_LOOP('',(#529));+#529 = ORIENTED_EDGE('',*,*,#530,.T.);+#530 = EDGE_CURVE('',#531,#531,#533,.T.);+#531 = VERTEX_POINT('',#532);+#532 = CARTESIAN_POINT('',(-1.9,-1.11,1.));+#533 = SURFACE_CURVE('',#534,(#539,#550),.PCURVE_S1.);+#534 = CIRCLE('',#535,0.21);+#535 = AXIS2_PLACEMENT_3D('',#536,#537,#538);+#536 = CARTESIAN_POINT('',(-2.11,-1.11,1.));+#537 = DIRECTION('',(0.,0.,-1.));+#538 = DIRECTION('',(1.,0.,0.));+#539 = PCURVE('',#288,#540);+#540 = DEFINITIONAL_REPRESENTATION('',(#541),#549);+#541 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#542,#543,#544,#545,#546,#547+,#548),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+    -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#542 = CARTESIAN_POINT('',(0.6,0.39));+#543 = CARTESIAN_POINT('',(0.6,2.626933041054E-02));+#544 = CARTESIAN_POINT('',(0.285,0.208134665205));+#545 = CARTESIAN_POINT('',(-3.E-02,0.39));+#546 = CARTESIAN_POINT('',(0.285,0.571865334795));+#547 = CARTESIAN_POINT('',(0.6,0.753730669589));+#548 = CARTESIAN_POINT('',(0.6,0.39));+#549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#550 = PCURVE('',#551,#556);+#551 = CYLINDRICAL_SURFACE('',#552,0.21);+#552 = AXIS2_PLACEMENT_3D('',#553,#554,#555);+#553 = CARTESIAN_POINT('',(-2.11,-1.11,0.95));+#554 = DIRECTION('',(-0.,-0.,-1.));+#555 = DIRECTION('',(1.,0.,0.));+#556 = DEFINITIONAL_REPRESENTATION('',(#557),#561);+#557 = LINE('',#558,#559);+#558 = CARTESIAN_POINT('',(-4.138911435803E-13,-5.E-02));+#559 = VECTOR('',#560,1.);+#560 = DIRECTION('',(1.,-0.));+#561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#562 = ADVANCED_FACE('',(#563),#262,.T.);+#563 = FACE_BOUND('',#564,.F.);+#564 = EDGE_LOOP('',(#565,#566,#567,#588));+#565 = ORIENTED_EDGE('',*,*,#246,.F.);+#566 = ORIENTED_EDGE('',*,*,#377,.T.);+#567 = ORIENTED_EDGE('',*,*,#568,.T.);+#568 = EDGE_CURVE('',#353,#485,#569,.T.);+#569 = SURFACE_CURVE('',#570,(#574,#581),.PCURVE_S1.);+#570 = LINE('',#571,#572);+#571 = CARTESIAN_POINT('',(1.14,0.14,2.28));+#572 = VECTOR('',#573,1.);+#573 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919));+#574 = PCURVE('',#262,#575);+#575 = DEFINITIONAL_REPRESENTATION('',(#576),#580);+#576 = LINE('',#577,#578);+#577 = CARTESIAN_POINT('',(-3.64,1.866761902332));+#578 = VECTOR('',#579,1.);+#579 = DIRECTION('',(0.57735026919,0.816496580928));+#580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#581 = PCURVE('',#418,#582);+#582 = DEFINITIONAL_REPRESENTATION('',(#583),#587);+#583 = LINE('',#584,#585);+#584 = CARTESIAN_POINT('',(1.64,1.866761902332));+#585 = VECTOR('',#586,1.);+#586 = DIRECTION('',(-0.57735026919,0.816496580928));+#587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#588 = ORIENTED_EDGE('',*,*,#507,.F.);+#589 = ADVANCED_FACE('',(#590),#418,.T.);+#590 = FACE_BOUND('',#591,.T.);+#591 = EDGE_LOOP('',(#592,#593,#594,#595));+#592 = ORIENTED_EDGE('',*,*,#435,.F.);+#593 = ORIENTED_EDGE('',*,*,#404,.T.);+#594 = ORIENTED_EDGE('',*,*,#568,.T.);+#595 = ORIENTED_EDGE('',*,*,#484,.F.);+#596 = ADVANCED_FACE('',(#597),#551,.F.);+#597 = FACE_BOUND('',#598,.F.);+#598 = EDGE_LOOP('',(#599,#622,#623,#624));+#599 = ORIENTED_EDGE('',*,*,#600,.T.);+#600 = EDGE_CURVE('',#601,#531,#603,.T.);+#601 = VERTEX_POINT('',#602);+#602 = CARTESIAN_POINT('',(-1.9,-1.11,0.95));+#603 = SEAM_CURVE('',#604,(#608,#615),.PCURVE_S1.);+#604 = LINE('',#605,#606);+#605 = CARTESIAN_POINT('',(-1.9,-1.11,0.95));+#606 = VECTOR('',#607,1.);+#607 = DIRECTION('',(0.,0.,1.));+#608 = PCURVE('',#551,#609);+#609 = DEFINITIONAL_REPRESENTATION('',(#610),#614);+#610 = LINE('',#611,#612);+#611 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#612 = VECTOR('',#613,1.);+#613 = DIRECTION('',(-0.,-1.));+#614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#615 = PCURVE('',#551,#616);+#616 = DEFINITIONAL_REPRESENTATION('',(#617),#621);+#617 = LINE('',#618,#619);+#618 = CARTESIAN_POINT('',(6.28318530718,0.));+#619 = VECTOR('',#620,1.);+#620 = DIRECTION('',(-0.,-1.));+#621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#622 = ORIENTED_EDGE('',*,*,#530,.T.);+#623 = ORIENTED_EDGE('',*,*,#600,.F.);+#624 = ORIENTED_EDGE('',*,*,#625,.T.);+#625 = EDGE_CURVE('',#601,#601,#626,.T.);+#626 = SURFACE_CURVE('',#627,(#632,#639),.PCURVE_S1.);+#627 = CIRCLE('',#628,0.21);+#628 = AXIS2_PLACEMENT_3D('',#629,#630,#631);+#629 = CARTESIAN_POINT('',(-2.11,-1.11,0.95));+#630 = DIRECTION('',(0.,0.,1.));+#631 = DIRECTION('',(1.,0.,0.));+#632 = PCURVE('',#551,#633);+#633 = DEFINITIONAL_REPRESENTATION('',(#634),#638);+#634 = LINE('',#635,#636);+#635 = CARTESIAN_POINT('',(6.28318530718,0.));+#636 = VECTOR('',#637,1.);+#637 = DIRECTION('',(-1.,0.));+#638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#639 = PCURVE('',#640,#645);+#640 = PLANE('',#641);+#641 = AXIS2_PLACEMENT_3D('',#642,#643,#644);+#642 = CARTESIAN_POINT('',(-2.11,-1.11,0.95));+#643 = DIRECTION('',(0.,0.,1.));+#644 = DIRECTION('',(1.,0.,0.));+#645 = DEFINITIONAL_REPRESENTATION('',(#646),#650);+#646 = CIRCLE('',#647,0.21);+#647 = AXIS2_PLACEMENT_2D('',#648,#649);+#648 = CARTESIAN_POINT('',(0.,0.));+#649 = DIRECTION('',(1.,0.));+#650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#651 = ADVANCED_FACE('',(#652),#640,.T.);+#652 = FACE_BOUND('',#653,.T.);+#653 = EDGE_LOOP('',(#654));+#654 = ORIENTED_EDGE('',*,*,#625,.T.);+#655 = MANIFOLD_SOLID_BREP('',#656);+#656 = CLOSED_SHELL('',(#657,#745,#749));+#657 = ADVANCED_FACE('',(#658),#671,.T.);+#658 = FACE_BOUND('',#659,.T.);+#659 = EDGE_LOOP('',(#660,#694,#717,#744));+#660 = ORIENTED_EDGE('',*,*,#661,.T.);+#661 = EDGE_CURVE('',#662,#662,#664,.T.);+#662 = VERTEX_POINT('',#663);+#663 = CARTESIAN_POINT('',(-1.9,-1.11,0.95));+#664 = SURFACE_CURVE('',#665,(#670,#682),.PCURVE_S1.);+#665 = CIRCLE('',#666,0.21);+#666 = AXIS2_PLACEMENT_3D('',#667,#668,#669);+#667 = CARTESIAN_POINT('',(-2.11,-1.11,0.95));+#668 = DIRECTION('',(0.,0.,1.));+#669 = DIRECTION('',(1.,0.,0.));+#670 = PCURVE('',#671,#676);+#671 = CYLINDRICAL_SURFACE('',#672,0.21);+#672 = AXIS2_PLACEMENT_3D('',#673,#674,#675);+#673 = CARTESIAN_POINT('',(-2.11,-1.11,0.95));+#674 = DIRECTION('',(-0.,-0.,-1.));+#675 = DIRECTION('',(1.,0.,0.));+#676 = DEFINITIONAL_REPRESENTATION('',(#677),#681);+#677 = LINE('',#678,#679);+#678 = CARTESIAN_POINT('',(6.28318530718,0.));+#679 = VECTOR('',#680,1.);+#680 = DIRECTION('',(-1.,0.));+#681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#682 = PCURVE('',#683,#688);+#683 = PLANE('',#684);+#684 = AXIS2_PLACEMENT_3D('',#685,#686,#687);+#685 = CARTESIAN_POINT('',(-2.11,-1.11,0.95));+#686 = DIRECTION('',(0.,0.,1.));+#687 = DIRECTION('',(1.,0.,0.));+#688 = DEFINITIONAL_REPRESENTATION('',(#689),#693);+#689 = CIRCLE('',#690,0.21);+#690 = AXIS2_PLACEMENT_2D('',#691,#692);+#691 = CARTESIAN_POINT('',(0.,0.));+#692 = DIRECTION('',(1.,0.));+#693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#694 = ORIENTED_EDGE('',*,*,#695,.T.);+#695 = EDGE_CURVE('',#662,#696,#698,.T.);+#696 = VERTEX_POINT('',#697);+#697 = CARTESIAN_POINT('',(-1.9,-1.11,0.955));+#698 = SEAM_CURVE('',#699,(#703,#710),.PCURVE_S1.);+#699 = LINE('',#700,#701);+#700 = CARTESIAN_POINT('',(-1.9,-1.11,0.95));+#701 = VECTOR('',#702,1.);+#702 = DIRECTION('',(0.,0.,1.));+#703 = PCURVE('',#671,#704);+#704 = DEFINITIONAL_REPRESENTATION('',(#705),#709);+#705 = LINE('',#706,#707);+#706 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#707 = VECTOR('',#708,1.);+#708 = DIRECTION('',(-0.,-1.));+#709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#710 = PCURVE('',#671,#711);+#711 = DEFINITIONAL_REPRESENTATION('',(#712),#716);+#712 = LINE('',#713,#714);+#713 = CARTESIAN_POINT('',(6.28318530718,0.));+#714 = VECTOR('',#715,1.);+#715 = DIRECTION('',(-0.,-1.));+#716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#717 = ORIENTED_EDGE('',*,*,#718,.F.);+#718 = EDGE_CURVE('',#696,#696,#719,.T.);+#719 = SURFACE_CURVE('',#720,(#725,#732),.PCURVE_S1.);+#720 = CIRCLE('',#721,0.21);+#721 = AXIS2_PLACEMENT_3D('',#722,#723,#724);+#722 = CARTESIAN_POINT('',(-2.11,-1.11,0.955));+#723 = DIRECTION('',(0.,0.,1.));+#724 = DIRECTION('',(1.,0.,0.));+#725 = PCURVE('',#671,#726);+#726 = DEFINITIONAL_REPRESENTATION('',(#727),#731);+#727 = LINE('',#728,#729);+#728 = CARTESIAN_POINT('',(6.28318530718,-5.E-03));+#729 = VECTOR('',#730,1.);+#730 = DIRECTION('',(-1.,0.));+#731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#732 = PCURVE('',#733,#738);+#733 = PLANE('',#734);+#734 = AXIS2_PLACEMENT_3D('',#735,#736,#737);+#735 = CARTESIAN_POINT('',(-2.11,-1.11,0.955));+#736 = DIRECTION('',(0.,0.,1.));+#737 = DIRECTION('',(1.,0.,0.));+#738 = DEFINITIONAL_REPRESENTATION('',(#739),#743);+#739 = CIRCLE('',#740,0.21);+#740 = AXIS2_PLACEMENT_2D('',#741,#742);+#741 = CARTESIAN_POINT('',(0.,0.));+#742 = DIRECTION('',(1.,0.));+#743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#744 = ORIENTED_EDGE('',*,*,#695,.F.);+#745 = ADVANCED_FACE('',(#746),#683,.F.);+#746 = FACE_BOUND('',#747,.F.);+#747 = EDGE_LOOP('',(#748));+#748 = ORIENTED_EDGE('',*,*,#661,.T.);+#749 = ADVANCED_FACE('',(#750),#733,.T.);+#750 = FACE_BOUND('',#751,.T.);+#751 = EDGE_LOOP('',(#752));+#752 = ORIENTED_EDGE('',*,*,#718,.T.);+#753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#757)) GLOBAL_UNIT_ASSIGNED_CONTEXT+((#754,#755,#756)) REPRESENTATION_CONTEXT('Context #1',+  '3D Context with UNIT and UNCERTAINTY') );+#754 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#755 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#756 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#757 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#754,+  'distance_accuracy_value','confusion accuracy');+#758 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#759 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#760,+    #768,#775,#782,#789,#796,#803,#810,#817,#824,#831,#838,#845,#853,+    #860),#753);+#760 = STYLED_ITEM('color',(#761),#17);+#761 = PRESENTATION_STYLE_ASSIGNMENT((#762));+#762 = SURFACE_STYLE_USAGE(.BOTH.,#763);+#763 = SURFACE_SIDE_STYLE('',(#764));+#764 = SURFACE_STYLE_FILL_AREA(#765);+#765 = FILL_AREA_STYLE('',(#766));+#766 = FILL_AREA_STYLE_COLOUR('',#767);+#767 = COLOUR_RGB('',0.120000001395,0.120000001395,0.130000001093);+#768 = STYLED_ITEM('color',(#769),#137);+#769 = PRESENTATION_STYLE_ASSIGNMENT((#770));+#770 = SURFACE_STYLE_USAGE(.BOTH.,#771);+#771 = SURFACE_SIDE_STYLE('',(#772));+#772 = SURFACE_STYLE_FILL_AREA(#773);+#773 = FILL_AREA_STYLE('',(#774));+#774 = FILL_AREA_STYLE_COLOUR('',#767);+#775 = STYLED_ITEM('color',(#776),#218);+#776 = PRESENTATION_STYLE_ASSIGNMENT((#777));+#777 = SURFACE_STYLE_USAGE(.BOTH.,#778);+#778 = SURFACE_SIDE_STYLE('',(#779));+#779 = SURFACE_STYLE_FILL_AREA(#780);+#780 = FILL_AREA_STYLE('',(#781));+#781 = FILL_AREA_STYLE_COLOUR('',#767);+#782 = STYLED_ITEM('color',(#783),#299);+#783 = PRESENTATION_STYLE_ASSIGNMENT((#784));+#784 = SURFACE_STYLE_USAGE(.BOTH.,#785);+#785 = SURFACE_SIDE_STYLE('',(#786));+#786 = SURFACE_STYLE_FILL_AREA(#787);+#787 = FILL_AREA_STYLE('',(#788));+#788 = FILL_AREA_STYLE_COLOUR('',#767);+#789 = STYLED_ITEM('color',(#790),#348);+#790 = PRESENTATION_STYLE_ASSIGNMENT((#791));+#791 = SURFACE_STYLE_USAGE(.BOTH.,#792);+#792 = SURFACE_SIDE_STYLE('',(#793));+#793 = SURFACE_STYLE_FILL_AREA(#794);+#794 = FILL_AREA_STYLE('',(#795));+#795 = FILL_AREA_STYLE_COLOUR('',#767);+#796 = STYLED_ITEM('color',(#797),#397);+#797 = PRESENTATION_STYLE_ASSIGNMENT((#798));+#798 = SURFACE_STYLE_USAGE(.BOTH.,#799);+#799 = SURFACE_SIDE_STYLE('',(#800));+#800 = SURFACE_STYLE_FILL_AREA(#801);+#801 = FILL_AREA_STYLE('',(#802));+#802 = FILL_AREA_STYLE_COLOUR('',#767);+#803 = STYLED_ITEM('color',(#804),#429);+#804 = PRESENTATION_STYLE_ASSIGNMENT((#805));+#805 = SURFACE_STYLE_USAGE(.BOTH.,#806);+#806 = SURFACE_SIDE_STYLE('',(#807));+#807 = SURFACE_STYLE_FILL_AREA(#808);+#808 = FILL_AREA_STYLE('',(#809));+#809 = FILL_AREA_STYLE_COLOUR('',#767);+#810 = STYLED_ITEM('color',(#811),#478);+#811 = PRESENTATION_STYLE_ASSIGNMENT((#812));+#812 = SURFACE_STYLE_USAGE(.BOTH.,#813);+#813 = SURFACE_SIDE_STYLE('',(#814));+#814 = SURFACE_STYLE_FILL_AREA(#815);+#815 = FILL_AREA_STYLE('',(#816));+#816 = FILL_AREA_STYLE_COLOUR('',#767);+#817 = STYLED_ITEM('color',(#818),#562);+#818 = PRESENTATION_STYLE_ASSIGNMENT((#819));+#819 = SURFACE_STYLE_USAGE(.BOTH.,#820);+#820 = SURFACE_SIDE_STYLE('',(#821));+#821 = SURFACE_STYLE_FILL_AREA(#822);+#822 = FILL_AREA_STYLE('',(#823));+#823 = FILL_AREA_STYLE_COLOUR('',#767);+#824 = STYLED_ITEM('color',(#825),#589);+#825 = PRESENTATION_STYLE_ASSIGNMENT((#826));+#826 = SURFACE_STYLE_USAGE(.BOTH.,#827);+#827 = SURFACE_SIDE_STYLE('',(#828));+#828 = SURFACE_STYLE_FILL_AREA(#829);+#829 = FILL_AREA_STYLE('',(#830));+#830 = FILL_AREA_STYLE_COLOUR('',#767);+#831 = STYLED_ITEM('color',(#832),#596);+#832 = PRESENTATION_STYLE_ASSIGNMENT((#833));+#833 = SURFACE_STYLE_USAGE(.BOTH.,#834);+#834 = SURFACE_SIDE_STYLE('',(#835));+#835 = SURFACE_STYLE_FILL_AREA(#836);+#836 = FILL_AREA_STYLE('',(#837));+#837 = FILL_AREA_STYLE_COLOUR('',#767);+#838 = STYLED_ITEM('color',(#839),#651);+#839 = PRESENTATION_STYLE_ASSIGNMENT((#840));+#840 = SURFACE_STYLE_USAGE(.BOTH.,#841);+#841 = SURFACE_SIDE_STYLE('',(#842));+#842 = SURFACE_STYLE_FILL_AREA(#843);+#843 = FILL_AREA_STYLE('',(#844));+#844 = FILL_AREA_STYLE_COLOUR('',#767);+#845 = STYLED_ITEM('color',(#846),#657);+#846 = PRESENTATION_STYLE_ASSIGNMENT((#847));+#847 = SURFACE_STYLE_USAGE(.BOTH.,#848);+#848 = SURFACE_SIDE_STYLE('',(#849));+#849 = SURFACE_STYLE_FILL_AREA(#850);+#850 = FILL_AREA_STYLE('',(#851));+#851 = FILL_AREA_STYLE_COLOUR('',#852);+#852 = COLOUR_RGB('',0.380000002513,0.380000002513,0.399999997426);+#853 = STYLED_ITEM('color',(#854),#745);+#854 = PRESENTATION_STYLE_ASSIGNMENT((#855));+#855 = SURFACE_STYLE_USAGE(.BOTH.,#856);+#856 = SURFACE_SIDE_STYLE('',(#857));+#857 = SURFACE_STYLE_FILL_AREA(#858);+#858 = FILL_AREA_STYLE('',(#859));+#859 = FILL_AREA_STYLE_COLOUR('',#852);+#860 = STYLED_ITEM('color',(#861),#749);+#861 = PRESENTATION_STYLE_ASSIGNMENT((#862));+#862 = SURFACE_STYLE_USAGE(.BOTH.,#863);+#863 = SURFACE_SIDE_STYLE('',(#864));+#864 = SURFACE_STYLE_FILL_AREA(#865);+#865 = FILL_AREA_STYLE('',(#866));+#866 = FILL_AREA_STYLE_COLOUR('',#852);+ENDSEC;+END-ISO-10303-21;
viewers/footprint.htmladded+1
@@ -0,0 +1 @@+<!doctype html><title>tc74lcx245fk</title>\ No newline at end of file
viewers/symbol.htmladded+1
@@ -0,0 +1 @@+<!doctype html><title>tc74lcx245fk</title>\ No newline at end of file