Generated by kicad-footprint-generator · KiCad file format 20260206
TC74A5-5.0VCTTR
Microchip Tech · Pre-ordered MCUs · SOT-23-5
TC74A5-5.0VCTTR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; this pin is not connected inside the device. |
| 2 | GND | power_in | Ground return for all TC74 functions. |
| 3 | VDD | power_in | Power supply input; the device operates from 2.7V to 5.5V, and this -5.0VCT part is accuracy-optimized at VDD = 5.0V, with accuracy degrading 1°C per volt of VDD change from nominal. |
| 4 | SCLK | input | SMBus/I2C serial clock input that clocks data into and out of the TC74; SDA and SCLK must be connected to VDD or GND when the serial port is inactive. |
| 5 | SDA | bidirectional | Bidirectional SMBus/I2C serial data line used to transfer data in both directions; it must be connected to VDD or GND when the serial port is inactive. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Embedded Processors & Controllers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.7 | 5.5 | V | Note 5 | 2 | |
| Temperature Accuracy | TERR | -2 | 2 | °C | +25°C < TA < +85°C | 2 | |
| Temperature Accuracy | TERR | -3 | 3 | °C | 0°C < TA < +125°C | 2 | |
| Power-on Reset Threshold | VPOR | 1.2 | 2.2 | V | VDD Falling Edge or Rising Edge | 2 | |
| Operating Current | IDD | 350 | µA | VDD = 5.5V, Note 1 | 2 | ||
| Standby Supply Current | IDD-STANDBY | 5 | 10 | µA | VDD = 3.3V; Serial Port Inactive, Note 4 | 2 | |
| Conversion Rate | CR | 4 | 8 | SPS | Note 2 | 2 | |
| SDA Output Low | VOL | 0.4 | V | IOL = 3 mA | 2 | ||
| SDA Output Low | VOL | 0.6 | V | IOL = 6 mA, Note 3 | 2 | ||
| Input Capacitance SDA, SCLK | CIN | 5 | pF | 2 | |||
| I/O Leakage | ILEAK | -1 | 0.1 | 1 | µA | 2 | |
| SMBus/I2C Clock Frequency | fSMB | 10 | 100 | kHz | CLOAD = 80 pF | 2 | |
| Low Clock Period | tLOW | 4.7 | µsec | CLOAD = 80 pF; 10% to 10% | 2 | ||
| High Clock Period | tHIGH | 4 | µsec | CLOAD = 80 pF; 90% to 90% | 2 | ||
| SMBus/I2C Rise Time | tR | 1000 | nsec | CLOAD = 80 pF; 10% to 90% | 2 | ||
| SMBus/I2C Fall Time | tF | 300 | nsec | CLOAD = 80 pF; 90% to10% | 2 | ||
| START Condition Setup Time (for repeated START Condition) | tSU(START) | 4 | µsec | CLOAD = 80 pF; 90% SCLK to 10% SDA | 3 | ||
| START Condition Hold Time | tH(START) | 4 | µsec | CLOAD = 80 pF | 3 | ||
| Data In Setup Time | tSU-DATA | 1000 | nsec | CLOAD = 80 pF | 3 | ||
| Data In Hold Time | tH-DAT | 1250 | nsec | CLOAD = 80 pF | 3 | ||
| STOP Condition Setup Time | tSU(STOP) | 4 | µsec | CLOAD = 80 pF | 3 | ||
| Bus Free Time Prior to New Transition | tIDLE | 4.7 | µsec | CLOAD = 80 pF | 3 | ||
| Supply Voltage (absolute maximum) | VDD | 6 | V | 2 | |||
| Current On Any Pin | -50 | 50 | mA | 2 | |||
| Operating Temperature | TA | -40 | 125 | °C | 2 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TC74A5-5.0VCTTR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.65 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tc74a5-5-0vcttr-etched.step/tc74a5-5-0vcttr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc74a5-5-0vcttr.step/tc74a5-5-0vcttr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (18 pp, sha256
ca1868099909da40, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).