Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TC74A5-5.0VCTTR

Microchip Tech · Pre-ordered MCUs · SOT-23-5

TC74A5-5.0VCTTR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection; this pin is not connected inside the device.
2 GND power_in Ground return for all TC74 functions.
3 VDD power_in Power supply input; the device operates from 2.7V to 5.5V, and this -5.0VCT part is accuracy-optimized at VDD = 5.0V, with accuracy degrading 1°C per volt of VDD change from nominal.
4 SCLK input SMBus/I2C serial clock input that clocks data into and out of the TC74; SDA and SCLK must be connected to VDD or GND when the serial port is inactive.
5 SDA bidirectional Bidirectional SMBus/I2C serial data line used to transfer data in both directions; it must be connected to VDD or GND when the serial port is inactive.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Embedded Processors & Controllers
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 2.7 5.5 V Note 5 2
Temperature Accuracy TERR -2 2 °C +25°C < TA < +85°C 2
Temperature Accuracy TERR -3 3 °C 0°C < TA < +125°C 2
Power-on Reset Threshold VPOR 1.2 2.2 V VDD Falling Edge or Rising Edge 2
Operating Current IDD 350 µA VDD = 5.5V, Note 1 2
Standby Supply Current IDD-STANDBY 5 10 µA VDD = 3.3V; Serial Port Inactive, Note 4 2
Conversion Rate CR 4 8 SPS Note 2 2
SDA Output Low VOL 0.4 V IOL = 3 mA 2
SDA Output Low VOL 0.6 V IOL = 6 mA, Note 3 2
Input Capacitance SDA, SCLK CIN 5 pF 2
I/O Leakage ILEAK -1 0.1 1 µA 2
SMBus/I2C Clock Frequency fSMB 10 100 kHz CLOAD = 80 pF 2
Low Clock Period tLOW 4.7 µsec CLOAD = 80 pF; 10% to 10% 2
High Clock Period tHIGH 4 µsec CLOAD = 80 pF; 90% to 90% 2
SMBus/I2C Rise Time tR 1000 nsec CLOAD = 80 pF; 10% to 90% 2
SMBus/I2C Fall Time tF 300 nsec CLOAD = 80 pF; 90% to10% 2
START Condition Setup Time (for repeated START Condition) tSU(START) 4 µsec CLOAD = 80 pF; 90% SCLK to 10% SDA 3
START Condition Hold Time tH(START) 4 µsec CLOAD = 80 pF 3
Data In Setup Time tSU-DATA 1000 nsec CLOAD = 80 pF 3
Data In Hold Time tH-DAT 1250 nsec CLOAD = 80 pF 3
STOP Condition Setup Time tSU(STOP) 4 µsec CLOAD = 80 pF 3
Bus Free Time Prior to New Transition tIDLE 4.7 µsec CLOAD = 80 pF 3
Supply Voltage (absolute maximum) VDD 6 V 2
Current On Any Pin -50 50 mA 2
Operating Temperature TA -40 125 °C 2
Storage Temperature TSTG -65 150 °C 2
Junction Temperature TJ 150 °C 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TC74A5-5.0VCTTR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.65 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tc74a5-5-0vcttr-etched.step / tc74a5-5-0vcttr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc74a5-5-0vcttr.step / tc74a5-5-0vcttr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (18 pp, sha256 ca1868099909da40, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF