main
Ray
Publish 0.1.0
37a1a98
TC6501P085VCTTR
Microchip Tech · Pre-ordered MCUs · SOT-23-5
TC6501P085VCTTR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground; connect directly to the PCB ground with a short connection. |
| 2 | GND | power_in | Ground with the lowest thermal resistance to the die; connect directly to PCB ground and use a short, wide copper trace to the device being monitored. |
| 3 | HYST | input | CMOS-compatible hysteresis select input: GND gives 2°C, VCC gives 10°C; do not let it float, as that can increase supply current. |
| 4 | VCC | power_in | Supply input, +2.7V to +5.5V (absolute max 7V); a 100 pF or greater decoupling capacitor to GND is recommended. |
| 5 | TOVER | output | Open-drain, active-low over-temperature output (TC6501) that goes low when temperature exceeds the factory-programmed threshold; needs an external pull-up (100 kΩ recommended) and may be pulled above VCC but not above 7.0V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | 2.7 | 5.5 | V | TAMB = -55°C to +135°C | 2 | |
| Supply Current | ICC | 17 | 40 | µA | 2 | ||
| HYST Input Threshold High | VIH | 0.8 | x VCC | 2 | |||
| HYST Input Threshold Low | VIL | 0.2 | x VCC | 2 | |||
| Temperature Threshold Accuracy | TTH | -6 | 0.5 | 6 | °C | +75°C to +125°C | 2 |
| Output Voltage Low | VOL | 0.3 | V | ISINK = 1.2 mA, VCC > 2.7V | 2 | ||
| Output Voltage Low | VOL | 0.4 | V | ISINK = 3.2 mA, VCC > 4.5V | 2 | ||
| Temperature Threshold Hysteresis | THYST | 2 | °C | HYST = GND | 2 | ||
| Temperature Threshold Hysteresis | THYST | 10 | °C | HYST = VCC | 2 | ||
| Open-Drain Output Leakage Current | 10 | nA | VCC = 2.7V, TOVER = 5.5V (TC6501) | 2 | |||
| Supply Voltage | VCC | -0.3 | 7 | V | 2 | ||
| Input Current (All Pins) | 20 | mA | 2 | ||||
| Output Current (All Pins) | 20 | mA | 2 | ||||
| TOVER Voltage (TC6501) | TOVER | -0.3 | 7 | V | 2 | ||
| Operating Temperature Range | -55 | 135 | °C | 2 | |||
| Storage Temperature Range | -65 | 165 | °C | 2 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| Thermal Resistance, 5-Pin SOT-23A | 140 | °C/W | typical | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TC6501P085VCTTR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.63 x 2.95 mm, terminals on the pads, 1.18 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tc6501p085vcttr-etched.step/tc6501p085vcttr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc6501p085vcttr.step/tc6501p085vcttr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (16 pp, sha256
a81ab2ccc04bae40, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# TC6501P085VCTTR
**Microchip Tech** · Pre-ordered MCUs · SOT-23-5
TC6501P085VCTTR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground; connect directly to the PCB ground with a short connection. |
| 2 | GND | power_in | Ground with the lowest thermal resistance to the die; connect directly to PCB ground and use a short, wide copper trace to the device being monitored. |
| 3 | HYST | input | CMOS-compatible hysteresis select input: GND gives 2°C, VCC gives 10°C; do not let it float, as that can increase supply current. |
| 4 | VCC | power_in | Supply input, +2.7V to +5.5V (absolute max 7V); a 100 pF or greater decoupling capacitor to GND is recommended. |
| 5 | TOVER | output | Open-drain, active-low over-temperature output (TC6501) that goes low when temperature exceeds the factory-programmed threshold; needs an external pull-up (100 kΩ recommended) and may be pulled above VCC but not above 7.0V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | 2.7 | | 5.5 | V | TAMB = -55°C to +135°C | 2 |
| Supply Current | ICC | | 17 | 40 | µA | | 2 |
| HYST Input Threshold High | VIH | 0.8 | | | x VCC | | 2 |
| HYST Input Threshold Low | VIL | | | 0.2 | x VCC | | 2 |
| Temperature Threshold Accuracy | TTH | -6 | 0.5 | 6 | °C | +75°C to +125°C | 2 |
| Output Voltage Low | VOL | | | 0.3 | V | ISINK = 1.2 mA, VCC > 2.7V | 2 |
| Output Voltage Low | VOL | | | 0.4 | V | ISINK = 3.2 mA, VCC > 4.5V | 2 |
| Temperature Threshold Hysteresis | THYST | | 2 | | °C | HYST = GND | 2 |
| Temperature Threshold Hysteresis | THYST | | 10 | | °C | HYST = VCC | 2 |
| Open-Drain Output Leakage Current | | | 10 | | nA | VCC = 2.7V, TOVER = 5.5V (TC6501) | 2 |
| Supply Voltage | VCC | -0.3 | | 7 | V | | 2 |
| Input Current (All Pins) | | | | 20 | mA | | 2 |
| Output Current (All Pins) | | | | 20 | mA | | 2 |
| TOVER Voltage (TC6501) | TOVER | -0.3 | | 7 | V | | 2 |
| Operating Temperature Range | | -55 | | 135 | °C | | 2 |
| Storage Temperature Range | | -65 | | 165 | °C | | 2 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 2 |
| Thermal Resistance, 5-Pin SOT-23A | | | 140 | | °C/W | typical | 6 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `TC6501P085VCTTR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.63 x 2.95 mm, terminals on the pads, 1.18 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tc6501p085vcttr-etched.step` / `tc6501p085vcttr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tc6501p085vcttr.step` / `tc6501p085vcttr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/tc6501p085vcttr-datasheet.pdf) (16 pp, sha256 `a81ab2ccc04bae40`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/tc6501p085vcttr-datasheet.pdf)