main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tc6501p085vcttr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tc6501p085vcttr-etched.glb tc6501p085vcttr: factory component page (tier=mfr) · Ray
tc6501p085vcttr-etched.step tc6501p085vcttr: factory component page (tier=mfr) · Ray
tc6501p085vcttr-hero.glb tc6501p085vcttr: hero GLB from the etched model (keeps the MPN mark) · Ray
tc6501p085vcttr-hero.overlay.json tc6501p085vcttr: hero GLB from the etched model (keeps the MPN mark) · Ray
tc6501p085vcttr.glb Publish 0.1.0 · Ray
tc6501p085vcttr.kicad_mod Publish 0.1.0 · Ray
tc6501p085vcttr.kicad_sym Publish 0.1.0 · Ray
tc6501p085vcttr.lbr Publish 0.1.0 · Ray
tc6501p085vcttr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

TC6501P085VCTTR

Microchip Tech · Pre-ordered MCUs · SOT-23-5

TC6501P085VCTTR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND power_in Ground; connect directly to the PCB ground with a short connection.
2 GND power_in Ground with the lowest thermal resistance to the die; connect directly to PCB ground and use a short, wide copper trace to the device being monitored.
3 HYST input CMOS-compatible hysteresis select input: GND gives 2°C, VCC gives 10°C; do not let it float, as that can increase supply current.
4 VCC power_in Supply input, +2.7V to +5.5V (absolute max 7V); a 100 pF or greater decoupling capacitor to GND is recommended.
5 TOVER output Open-drain, active-low over-temperature output (TC6501) that goes low when temperature exceeds the factory-programmed threshold; needs an external pull-up (100 kΩ recommended) and may be pulled above VCC but not above 7.0V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Single Chip Microcomputer/Microcontroller
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VCC 2.7 5.5 V TAMB = -55°C to +135°C 2
Supply Current ICC 17 40 µA 2
HYST Input Threshold High VIH 0.8 x VCC 2
HYST Input Threshold Low VIL 0.2 x VCC 2
Temperature Threshold Accuracy TTH -6 0.5 6 °C +75°C to +125°C 2
Output Voltage Low VOL 0.3 V ISINK = 1.2 mA, VCC > 2.7V 2
Output Voltage Low VOL 0.4 V ISINK = 3.2 mA, VCC > 4.5V 2
Temperature Threshold Hysteresis THYST 2 °C HYST = GND 2
Temperature Threshold Hysteresis THYST 10 °C HYST = VCC 2
Open-Drain Output Leakage Current 10 nA VCC = 2.7V, TOVER = 5.5V (TC6501) 2
Supply Voltage VCC -0.3 7 V 2
Input Current (All Pins) 20 mA 2
Output Current (All Pins) 20 mA 2
TOVER Voltage (TC6501) TOVER -0.3 7 V 2
Operating Temperature Range -55 135 °C 2
Storage Temperature Range -65 165 °C 2
Maximum Junction Temperature TJ 150 °C 2
Thermal Resistance, 5-Pin SOT-23A 140 °C/W typical 6

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TC6501P085VCTTR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.63 x 2.95 mm, terminals on the pads, 1.18 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tc6501p085vcttr-etched.step / tc6501p085vcttr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc6501p085vcttr.step / tc6501p085vcttr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (16 pp, sha256 a81ab2ccc04bae40, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF