main
Ray
Publish 0.1.0
59b4308
TC621CEOA
Microchip Tech · Temperature Sensors · SOIC-8
TC621CEOA from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | THERMISTOR | input | Thermistor input for the external NTC thermistor (about 100 kΩ at 25°C recommended) used for remote temperature sensing. |
| 2 | HIGH SET | input | High temperature set point; connect an external 1% resistor from HIGH SET to VDD to set the trip point, with a value lower than the LOW SET resistor. |
| 3 | LOW SET | input | Low temperature set point; connect an external 1% resistor from LOW SET to VDD to set the trip point, with a value higher than the HIGH SET resistor. |
| 4 | GND | power_in | Ground terminal. |
| 5 | CONTROL | output | Control (hysteresis) output rated for 1 mA maximum source or sink current; the C suffix gives the cooling option (high-true CONTROL) per the block diagram. |
| 6 | LOW LIMIT | output | Low temperature push/pull output, low true with an NTC thermistor, rated 1 mA maximum source or sink current. |
| 7 | HIGH LIMIT | output | High temperature push/pull output, low true with an NTC thermistor, rated 1 mA maximum source or sink current. |
| 8 | VDD | power_in | Power supply input, 4.5 V to 18 V operating range (20 V absolute maximum). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VDD | 4.5 | 18 | V | TA = 25°C | 3 | |
| Supply Current | IDD | 270 | 400 | µA | 5V ≤ VDD ≤ 18V, TA = 25°C | 3 | |
| Output Resistance | ROUT | 400 | 1000 | Ω | Output High or Low, 5V ≤ VDD ≤ 18V | 3 | |
| Output Current (Temp. Sensed) | IOUT | 1 | mA | Temp. Sensed Source/Sink | 3 | ||
| Output Current (Cool/Heat) | IOUT | 1 | mA | Cool/Heat Source/Sink | 3 | ||
| Absolute Accuracy | TERR | -3 | 3 | °C | T = Programmed Temperature (T-3 to T+3) | 3 | |
| Specified Temperature Range (E) | TA | -40 | 85 | °C | 4.5V ≤ VDD ≤ 18V | 3 | |
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | TA | -65 | 150 | °C | 3 | ||
| Input Voltage Any Input | -0.3 | 0.3 | V | (GND, 0.3V) to (VDD + 0.3V); max is VDD + 0.3 | 3 | ||
| Derating Factor Plastic | 8 | mW/°C | Plastic | 3 | |||
| Operating Temperature E Version | -40 | 85 | °C | 3 | |||
| Thermal Resistance, 8L-SOIC | θJA | 155 | °C/W | 3 | |||
| Built-in Hysteresis | -2 | °C | below programmed settings on LOW SET and HIGH SET | 5 |
CAD (KiCad official)
- Symbol:
TC621CEOA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tc621ceoa-etched.step/tc621ceoa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc621ceoa.step/tc621ceoa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (20 pp, sha256
52bf84f15880d09d, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TC621CEOA
**Microchip Tech** · Temperature Sensors · SOIC-8
TC621CEOA from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | THERMISTOR | input | Thermistor input for the external NTC thermistor (about 100 kΩ at 25°C recommended) used for remote temperature sensing. |
| 2 | HIGH SET | input | High temperature set point; connect an external 1% resistor from HIGH SET to VDD to set the trip point, with a value lower than the LOW SET resistor. |
| 3 | LOW SET | input | Low temperature set point; connect an external 1% resistor from LOW SET to VDD to set the trip point, with a value higher than the HIGH SET resistor. |
| 4 | GND | power_in | Ground terminal. |
| 5 | CONTROL | output | Control (hysteresis) output rated for 1 mA maximum source or sink current; the C suffix gives the cooling option (high-true CONTROL) per the block diagram. |
| 6 | LOW LIMIT | output | Low temperature push/pull output, low true with an NTC thermistor, rated 1 mA maximum source or sink current. |
| 7 | HIGH LIMIT | output | High temperature push/pull output, low true with an NTC thermistor, rated 1 mA maximum source or sink current. |
| 8 | VDD | power_in | Power supply input, 4.5 V to 18 V operating range (20 V absolute maximum). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VDD | 4.5 | | 18 | V | TA = 25°C | 3 |
| Supply Current | IDD | | 270 | 400 | µA | 5V ≤ VDD ≤ 18V, TA = 25°C | 3 |
| Output Resistance | ROUT | | 400 | 1000 | Ω | Output High or Low, 5V ≤ VDD ≤ 18V | 3 |
| Output Current (Temp. Sensed) | IOUT | | | 1 | mA | Temp. Sensed Source/Sink | 3 |
| Output Current (Cool/Heat) | IOUT | | | 1 | mA | Cool/Heat Source/Sink | 3 |
| Absolute Accuracy | TERR | -3 | | 3 | °C | T = Programmed Temperature (T-3 to T+3) | 3 |
| Specified Temperature Range (E) | TA | -40 | | 85 | °C | 4.5V ≤ VDD ≤ 18V | 3 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 3 |
| Input Voltage Any Input | | -0.3 | | 0.3 | V | (GND, 0.3V) to (VDD + 0.3V); max is VDD + 0.3 | 3 |
| Derating Factor Plastic | | | 8 | | mW/°C | Plastic | 3 |
| Operating Temperature E Version | | -40 | | 85 | °C | | 3 |
| Thermal Resistance, 8L-SOIC | θJA | | 155 | | °C/W | | 3 |
| Built-in Hysteresis | | | -2 | | °C | below programmed settings on LOW SET and HIGH SET | 5 |
## CAD (KiCad official)
- Symbol: `TC621CEOA`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `tc621ceoa-etched.step` / `tc621ceoa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tc621ceoa.step` / `tc621ceoa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/tc621ceoa-datasheet.pdf) (20 pp, sha256 `52bf84f15880d09d`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tc621ceoa-datasheet.pdf)