Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TC621CEOA

Microchip Tech · Temperature Sensors · SOIC-8

TC621CEOA from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 THERMISTOR input Thermistor input for the external NTC thermistor (about 100 kΩ at 25°C recommended) used for remote temperature sensing.
2 HIGH SET input High temperature set point; connect an external 1% resistor from HIGH SET to VDD to set the trip point, with a value lower than the LOW SET resistor.
3 LOW SET input Low temperature set point; connect an external 1% resistor from LOW SET to VDD to set the trip point, with a value higher than the HIGH SET resistor.
4 GND power_in Ground terminal.
5 CONTROL output Control (hysteresis) output rated for 1 mA maximum source or sink current; the C suffix gives the cooling option (high-true CONTROL) per the block diagram.
6 LOW LIMIT output Low temperature push/pull output, low true with an NTC thermistor, rated 1 mA maximum source or sink current.
7 HIGH LIMIT output High temperature push/pull output, low true with an NTC thermistor, rated 1 mA maximum source or sink current.
8 VDD power_in Power supply input, 4.5 V to 18 V operating range (20 V absolute maximum).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VDD 4.5 18 V TA = 25°C 3
Supply Current IDD 270 400 µA 5V ≤ VDD ≤ 18V, TA = 25°C 3
Output Resistance ROUT 400 1000 Ω Output High or Low, 5V ≤ VDD ≤ 18V 3
Output Current (Temp. Sensed) IOUT 1 mA Temp. Sensed Source/Sink 3
Output Current (Cool/Heat) IOUT 1 mA Cool/Heat Source/Sink 3
Absolute Accuracy TERR -3 3 °C T = Programmed Temperature (T-3 to T+3) 3
Specified Temperature Range (E) TA -40 85 °C 4.5V ≤ VDD ≤ 18V 3
Maximum Junction Temperature TJ 150 °C 3
Storage Temperature Range TA -65 150 °C 3
Input Voltage Any Input -0.3 0.3 V (GND, 0.3V) to (VDD + 0.3V); max is VDD + 0.3 3
Derating Factor Plastic 8 mW/°C Plastic 3
Operating Temperature E Version -40 85 °C 3
Thermal Resistance, 8L-SOIC θJA 155 °C/W 3
Built-in Hysteresis -2 °C below programmed settings on LOW SET and HIGH SET 5

CAD (KiCad official)

  • Symbol: TC621CEOA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tc621ceoa-etched.step / tc621ceoa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc621ceoa.step / tc621ceoa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (20 pp, sha256 52bf84f15880d09d, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF