main
Ray Publish 0.1.0 66f8528
{
  "slug": "tc4431cpa",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Gate Drive ICs, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "tc4431cpa",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tc4431cpa.kicad_sym",
    "tc4431cpa.kicad_mod",
    "tc4431cpa.glb",
    "tc4431cpa.step",
    "tc4431cpa.lbr",
    "docs/hero.png",
    "docs/tc4431cpa-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tc4431cpa-hero.glb",
    "tc4431cpa-hero.overlay.json",
    "tc4431cpa-etched.glb"
  ],
  "component": {
    "mpn": "TC4431CPA",
    "manufacturer": "Microchip Tech",
    "package": "PDIP-8",
    "pin_count": 8,
    "category": "Power Supply Chip",
    "subcategory": "Gate Drive ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ccf702cc2f2843990f7e98cda63450b2.pdf",
    "parts": {
      "symbol": "tc4431cpa.kicad_sym",
      "footprint": "tc4431cpa.kicad_mod",
      "model_3d": "tc4431cpa-hero.glb",
      "model_3d_plain": "tc4431cpa-etched.glb",
      "model_3d_step": "tc4431cpa-etched.step",
      "model_3d_step_plain": "tc4431cpa.step",
      "lbr": "tc4431cpa.lbr"
    },
    "distributor_links": {
      "lcsc": "C640805",
      "digikey": "TC4431CPA-ND",
      "mouser": "579-TC4431CPA"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T16:18:21Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "TC4431CPA-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "579-TC4431CPA",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Bias supply input for the MOSFET driver, rated for 4.5V to 30V with respect to the ground pins and should be bypassed to ground with a local ceramic capacitor."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "input",
        "description": "TTL/CMOS compatible control input with 250 mV of hysteresis between the high and low thresholds, where a series current-limiting resistor is recommended if the input exceeds 12V."
      },
      {
        "number": "3",
        "name": "LOCK DIS",
        "type": "input",
        "description": "Enables or disables undervoltage lockout: leave floating for lockout (output enabled at 8.4V typical rising, disabled at 7.7V typical falling) or tie to ground for operation below 7V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return path for the bias current and high peak discharge currents, and both ground pins should be used for proper operation."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return path for the bias current and high peak discharge currents, and both ground pins should be used for proper operation."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "Sink (pull-down) drive output that can sink 1.5 A peak currents from a capacitive load."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "output",
        "description": "Source (pull-up) drive output that can source 3 A peak currents into capacitive loads."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Bias supply input for the MOSFET driver, rated for 4.5V to 30V with respect to the ground pins and should be bypassed to ground with a local ceramic capacitor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet footnote says the PA (PDIP) package is offered in the E temperature range only, but th"
        ],
        "pages_sent": 18,
        "cost_usd": 0.0179,
        "at": "2026-10-28T16:17:54"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/ccf702cc2f2843990f7e98cda63450b2.pdf",
        "pages": 18,
        "sha256": "2a6e62628b47c4fb",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tc4431cpa.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tc4431cpa-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8954433f6505a89097dd5c698bd491d5c0cfde565f9787a6c1a0048ec116c61c",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}