Generated by kicad-footprint-generator · KiCad file format 20260206
TC25D026000GECN111
TKD · Temperature Compensated Crystal Oscillators (TCXO) · SMD2520-4P
TC25D026000GECN111 from TKD, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC or GND | passive | Pin 1 may be left unconnected or tied to GND, and the datasheet recommends GND. |
| 2 | GND | power_in | Ground connection for the TCXO. |
| 3 | Fout | output | Clipped sine-wave 26 MHz output with 10kΩ//10pF load; a DC-cut capacitor above 1nF must be added in the output line because none is inside the TCXO. |
| 4 | Vcc | power_in | Supply input, with a selectable operating range of 1.7 to 3.6 V and electrical parameters specified at typical supply voltage 2.80 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TKD |
| Package | SMD2520-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Stability vs. Temperature | -2 | 2 | ppm | @-40℃~-30℃ (Note1: referenced to midpoint of min and max frequency) | 3 | ||
| Frequency Stability vs. Temperature | -0.5 | 0.5 | ppm | @-30℃~85℃ (Note1: referenced to midpoint of min and max frequency) | 3 | ||
| Frequency Stability vs. Load | -0.2 | 0.2 | ppm | Load ±10% | 3 | ||
| Frequency Stability vs. Supply Voltage | -0.2 | 0.2 | ppm | Standard Vcc±5% | 3 | ||
| Operating Temperature Range | -40 | 85 | ℃ | 3 | |||
| Frequency Tolerance | -2 | 2 | ppm | Refer to nominal frequency (Note2) | 3 | ||
| Supply Voltage | 2.66 | 2.8 | 2.94 | V | Note3: selectable operating range 1.7~3.6V; electrical parameters measured under typical supply voltage | 3 | |
| Current Consumption | 2 | mA | 3 | ||||
| Output Level | 0.8 | Vp-p | Note4: DC-cut capacitor (above 1nF) to be added on output line | 3 | |||
| Duty Cycle | 40 | 50 | 60 | % | 3 | ||
| Aging | -1 | 1 | ppm | 1st year @25℃ | 3 | ||
| Phase Noise | -96 | dBc/Hz | @10 Hz offset | 3 | |||
| Phase Noise | -121 | dBc/Hz | @100 Hz offset | 3 | |||
| Phase Noise | -140 | dBc/Hz | @1 kHz offset | 3 | |||
| Phase Noise | -150 | dBc/Hz | @10 kHz offset | 3 | |||
| Phase Noise | -155 | dBc/Hz | @100 kHz offset | 3 | |||
| Phase Noise | -156 | dBc/Hz | @1 MHz offset | 3 | |||
| Start-up Time | 2 | ms | To 90% of Vp-p | 3 | |||
| Storage Temperature | -40 | 85 | ℃ | 3 | |||
| Nominal Frequency | 26 | MHz | 3 |
CAD (KiCad official)
- Symbol:
TC25D026000GECN111 - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
tc25d026000gecn111-etched.step/tc25d026000gecn111-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc25d026000gecn111.step/tc25d026000gecn111.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TKD datasheet (10 pp, sha256
d9c10232d5cdc410, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).