Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TC25D026000GECN111

TKD · Temperature Compensated Crystal Oscillators (TCXO) · SMD2520-4P

TC25D026000GECN111 from TKD, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC or GND passive Pin 1 may be left unconnected or tied to GND, and the datasheet recommends GND.
2 GND power_in Ground connection for the TCXO.
3 Fout output Clipped sine-wave 26 MHz output with 10kΩ//10pF load; a DC-cut capacitor above 1nF must be added in the output line because none is inside the TCXO.
4 Vcc power_in Supply input, with a selectable operating range of 1.7 to 3.6 V and electrical parameters specified at typical supply voltage 2.80 V.

Key specifications

Parameter Value
Manufacturer TKD
Package SMD2520-4P
Category Crystals, Oscillators, Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Stability vs. Temperature -2 2 ppm @-40℃~-30℃ (Note1: referenced to midpoint of min and max frequency) 3
Frequency Stability vs. Temperature -0.5 0.5 ppm @-30℃~85℃ (Note1: referenced to midpoint of min and max frequency) 3
Frequency Stability vs. Load -0.2 0.2 ppm Load ±10% 3
Frequency Stability vs. Supply Voltage -0.2 0.2 ppm Standard Vcc±5% 3
Operating Temperature Range -40 85 ℃ 3
Frequency Tolerance -2 2 ppm Refer to nominal frequency (Note2) 3
Supply Voltage 2.66 2.8 2.94 V Note3: selectable operating range 1.7~3.6V; electrical parameters measured under typical supply voltage 3
Current Consumption 2 mA 3
Output Level 0.8 Vp-p Note4: DC-cut capacitor (above 1nF) to be added on output line 3
Duty Cycle 40 50 60 % 3
Aging -1 1 ppm 1st year @25℃ 3
Phase Noise -96 dBc/Hz @10 Hz offset 3
Phase Noise -121 dBc/Hz @100 Hz offset 3
Phase Noise -140 dBc/Hz @1 kHz offset 3
Phase Noise -150 dBc/Hz @10 kHz offset 3
Phase Noise -155 dBc/Hz @100 kHz offset 3
Phase Noise -156 dBc/Hz @1 MHz offset 3
Start-up Time 2 ms To 90% of Vp-p 3
Storage Temperature -40 85 ℃ 3
Nominal Frequency 26 MHz 3

CAD (KiCad official)

  • Symbol: TC25D026000GECN111
  • Footprint: Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm
  • 3D model: SMD2520-4P (KiCad packages3D, STEP)
  • 3D model files: tc25d026000gecn111-etched.step / tc25d026000gecn111-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc25d026000gecn111.step / tc25d026000gecn111.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TKD datasheet (10 pp, sha256 d9c10232d5cdc410, retrieved 2026-10-16, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF