main
Ray Publish 0.1.0 178729f

TC1303C-ZS0EMF

Microchip Tech · Linear Voltage Regulators (LDO) · DFN-10-EP(3x3)

TC1303C-ZS0EMF from Microchip Tech, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHDN2 input Active-low shutdown input for the LDO output; a logic high above 45% of VIN enables the regulator and a logic low below 15% of VIN turns the output off.
2 VIN2 power_in LDO power input supply pin; connect the variable input source to VIN2 and keep it as short as possible to VIN1.
3 VOUT2 power_out Regulated LDO output; connect a 1 µF or larger capacitor between VOUT2 and AGND for proper operation.
4 PG output Power-good output indicating VOUT2 is within 94% of regulation; on the TC1303C it is an open-drain output.
5 AGND power_in Analog ground connection, to be tied to the analog portion of the ground plane.
6 VFB/VOUT1 input Buck feedback input for the adjustable version (connect the divider center here) or buck output sense for the fixed version (connect the buck output here).
7 SHDN1 input Active-low shutdown input for the buck regulator output; a logic high above 45% of VIN enables it and a logic low below 15% of VIN turns it off.
8 VIN1 power_in Buck regulator power input supply pin; connect a variable input voltage source and keep the connection to VIN2 as short as possible.
9 LX output Buck inductor connection carrying large switching currents; connect directly to the buck inductor with all connections kept as short as possible.
10 PGND power_in Power ground return for all large-signal currents, to be routed with a small loop area to limit switching noise coupling.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package DFN-10-EP(3x3)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 2.7 5.5 V Note 1, Note 2, Note 8 7
Maximum Output Current IOUT1_MAX 500 mA Note 1 7
Maximum Output Current IOUT2_MAX 300 mA Note 1 7
TC1303C, TC1304 Operating IQ IQ 70.1 110 µA SHDN1 = SHDN2=VIN2, IOUT1 = 0 mA, IOUT2 = 0 mA 7
Shutdown Current, Combined VIN1 and VIN2 Current IIN_SHDN 0.05 1 µA SHDN1 = SHDN2 = GND 7
SHDN1,SHDN2, SHDN (TC1304) Logic Input Voltage Low VIL 15 %VIN VIN1 =VIN2 = 2.7V to 5.5V 7
SHDN1,SHDN2, SHDN (TC1304) Logic Input Voltage High VIH 45 %VIN VIN1 =VIN2 = 2.7V to 5.5V 7
SHDN1,SHDN2, SHDN (TC1304) Input Leakage Current IIN -1 0.01 1 µA VIN1 =VIN2 = 2.7V to 5.5V, SHDNX = GND, SHDNY =VIN 7
Undervoltage Lockout (VOUT1 and VOUT2) UVLO 2.4 2.55 2.7 V VIN1 Falling 7
Adjustable Output Voltage Range VOUT1 0.8 4.5 V 8
Adjustable Reference Feedback Voltage VFB1 0.78 0.8 0.82 V 8
Output Voltage Tolerance Fixed VOUT1 -2.5 0.3 2.5 % Note 2 8
Internal Oscillator Frequency FOSC 1.6 2 2.4 MHz 8
LX Pin Leakage Current ILX -1 0.01 1 μA SHDN = 0V, VIN = 5.5V, LX = 0V, LX = 5.5V 8
Output Voltage Tolerance (VOUT2) VOUT2 -2.5 0.3 2.5 % Note 2 8
Line Regulation ΔVOUT2/ΔVIN -0.2 0.02 0.2 %/V (VR+1V) ≤ VIN ≤ 5.5V 8
Load Regulation, VOUT2 ≥ 2.5V ΔVOUT2/IOUT2 -0.75 -0.08 0.75 % IOUT2 = 0.1 mA to 300 mA (Note 4) 8
Load Regulation, VOUT2 < 2.5V ΔVOUT2/IOUT2 -0.9 -0.18 0.9 % IOUT2 = 0.1 mA to 300 mA (Note 4) 8
Dropout Voltage VOUT2 > 2.5V VIN, VOUT2 137 300 mV IOUT2 = 200 mA (Note 5) 8
Dropout Voltage VOUT2 > 2.5V VIN, VOUT2 205 500 mV IOUT2 = 300 mA 8
Wake-Up Time (From SHDN2 mode), (VOUT2) tWK 31 100 µs IOUT1 = IOUT2 = 50 mA 9
Power-Good Voltage Range VPG 1 5.5 V TA = 0°C to +70°C, VIN ≤ 2.7, ISINK = 100 µA 9
Power-Good Voltage Range VPG 1.2 5.5 V TA = -40°C to +85°C, VIN ≤ 2.7, ISINK = 100 µA 9
PG Threshold High (VOUT1 or VOUT2) VTH_H 94 96 % of VOUTX On Rising VOUT1 or VOUT2; VOUTX =VOUT1 or VOUT2 9
PG Threshold Low (VOUT1 or VOUT2) VTH_L 89 92 % of VOUTX On Falling VOUT1 or VOUT2; VOUTX =VOUT1 or VOUT2 9
PG Active Time-out Period tRPU 140 262 560 ms VOUT1 or VOUT2 =VTH - 100 mV to VTH + 100 mV, ISINK = 1.2 mA 9
PG Output Voltage Low PG_VOL 0.2 V VOUT1 or VOUT2 =VTH - 100 mV, IPG = 1.2 mA, VIN2 > 2.7V 9
Operating Junction Temperature Range TJ -40 125 °C Steady state 10
Storage Temperature Range TA -65 150 °C 10
Maximum Junction Temperature TJ 150 °C Transient 10
Thermal Resistance, 10L-DFN θJA 41 °C/W Typical 4-layer Board with Internal Ground Plane and 2 Vias in Thermal Pad 10
VIN - AGND 6 V 7
PGND to AGND -0.3 0.3 V 7
Ambient Temp. with Power Applied -40 85 °C 7

CAD (KiCad official)

  • Symbol: TC1303C-ZS0EMF
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tc1303c-zs0emf-etched.step / tc1303c-zs0emf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc1303c-zs0emf.step / tc1303c-zs0emf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (38 pp, sha256 9ccb545ec9b0a8b1, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF