Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
TC1303C-ZS0EMF
Microchip Tech · Linear Voltage Regulators (LDO) · DFN-10-EP(3x3)
TC1303C-ZS0EMF from Microchip Tech, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN2 | input | Active-low shutdown input for the LDO output; a logic high above 45% of VIN enables the regulator and a logic low below 15% of VIN turns the output off. |
| 2 | VIN2 | power_in | LDO power input supply pin; connect the variable input source to VIN2 and keep it as short as possible to VIN1. |
| 3 | VOUT2 | power_out | Regulated LDO output; connect a 1 µF or larger capacitor between VOUT2 and AGND for proper operation. |
| 4 | PG | output | Power-good output indicating VOUT2 is within 94% of regulation; on the TC1303C it is an open-drain output. |
| 5 | AGND | power_in | Analog ground connection, to be tied to the analog portion of the ground plane. |
| 6 | VFB/VOUT1 | input | Buck feedback input for the adjustable version (connect the divider center here) or buck output sense for the fixed version (connect the buck output here). |
| 7 | SHDN1 | input | Active-low shutdown input for the buck regulator output; a logic high above 45% of VIN enables it and a logic low below 15% of VIN turns it off. |
| 8 | VIN1 | power_in | Buck regulator power input supply pin; connect a variable input voltage source and keep the connection to VIN2 as short as possible. |
| 9 | LX | output | Buck inductor connection carrying large switching currents; connect directly to the buck inductor with all connections kept as short as possible. |
| 10 | PGND | power_in | Power ground return for all large-signal currents, to be routed with a small loop area to limit switching noise coupling. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | DFN-10-EP(3x3) |
| Category | Power Supply Chip |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 2.7 | 5.5 | V | Note 1, Note 2, Note 8 | 7 | |
| Maximum Output Current | IOUT1_MAX | 500 | mA | Note 1 | 7 | ||
| Maximum Output Current | IOUT2_MAX | 300 | mA | Note 1 | 7 | ||
| TC1303C, TC1304 Operating IQ | IQ | 70.1 | 110 | µA | SHDN1 = SHDN2=VIN2, IOUT1 = 0 mA, IOUT2 = 0 mA | 7 | |
| Shutdown Current, Combined VIN1 and VIN2 Current | IIN_SHDN | 0.05 | 1 | µA | SHDN1 = SHDN2 = GND | 7 | |
| SHDN1,SHDN2, SHDN (TC1304) Logic Input Voltage Low | VIL | 15 | %VIN | VIN1 =VIN2 = 2.7V to 5.5V | 7 | ||
| SHDN1,SHDN2, SHDN (TC1304) Logic Input Voltage High | VIH | 45 | %VIN | VIN1 =VIN2 = 2.7V to 5.5V | 7 | ||
| SHDN1,SHDN2, SHDN (TC1304) Input Leakage Current | IIN | -1 | 0.01 | 1 | µA | VIN1 =VIN2 = 2.7V to 5.5V, SHDNX = GND, SHDNY =VIN | 7 |
| Undervoltage Lockout (VOUT1 and VOUT2) | UVLO | 2.4 | 2.55 | 2.7 | V | VIN1 Falling | 7 |
| Adjustable Output Voltage Range | VOUT1 | 0.8 | 4.5 | V | 8 | ||
| Adjustable Reference Feedback Voltage | VFB1 | 0.78 | 0.8 | 0.82 | V | 8 | |
| Output Voltage Tolerance Fixed | VOUT1 | -2.5 | 0.3 | 2.5 | % | Note 2 | 8 |
| Internal Oscillator Frequency | FOSC | 1.6 | 2 | 2.4 | MHz | 8 | |
| LX Pin Leakage Current | ILX | -1 | 0.01 | 1 | μA | SHDN = 0V, VIN = 5.5V, LX = 0V, LX = 5.5V | 8 |
| Output Voltage Tolerance (VOUT2) | VOUT2 | -2.5 | 0.3 | 2.5 | % | Note 2 | 8 |
| Line Regulation | ΔVOUT2/ΔVIN | -0.2 | 0.02 | 0.2 | %/V | (VR+1V) ≤ VIN ≤ 5.5V | 8 |
| Load Regulation, VOUT2 ≥ 2.5V | ΔVOUT2/IOUT2 | -0.75 | -0.08 | 0.75 | % | IOUT2 = 0.1 mA to 300 mA (Note 4) | 8 |
| Load Regulation, VOUT2 < 2.5V | ΔVOUT2/IOUT2 | -0.9 | -0.18 | 0.9 | % | IOUT2 = 0.1 mA to 300 mA (Note 4) | 8 |
| Dropout Voltage VOUT2 > 2.5V | VIN, VOUT2 | 137 | 300 | mV | IOUT2 = 200 mA (Note 5) | 8 | |
| Dropout Voltage VOUT2 > 2.5V | VIN, VOUT2 | 205 | 500 | mV | IOUT2 = 300 mA | 8 | |
| Wake-Up Time (From SHDN2 mode), (VOUT2) | tWK | 31 | 100 | µs | IOUT1 = IOUT2 = 50 mA | 9 | |
| Power-Good Voltage Range | VPG | 1 | 5.5 | V | TA = 0°C to +70°C, VIN ≤ 2.7, ISINK = 100 µA | 9 | |
| Power-Good Voltage Range | VPG | 1.2 | 5.5 | V | TA = -40°C to +85°C, VIN ≤ 2.7, ISINK = 100 µA | 9 | |
| PG Threshold High (VOUT1 or VOUT2) | VTH_H | 94 | 96 | % of VOUTX | On Rising VOUT1 or VOUT2; VOUTX =VOUT1 or VOUT2 | 9 | |
| PG Threshold Low (VOUT1 or VOUT2) | VTH_L | 89 | 92 | % of VOUTX | On Falling VOUT1 or VOUT2; VOUTX =VOUT1 or VOUT2 | 9 | |
| PG Active Time-out Period | tRPU | 140 | 262 | 560 | ms | VOUT1 or VOUT2 =VTH - 100 mV to VTH + 100 mV, ISINK = 1.2 mA | 9 |
| PG Output Voltage Low | PG_VOL | 0.2 | V | VOUT1 or VOUT2 =VTH - 100 mV, IPG = 1.2 mA, VIN2 > 2.7V | 9 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady state | 10 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 10 | ||
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 10 | ||
| Thermal Resistance, 10L-DFN | θJA | 41 | °C/W | Typical 4-layer Board with Internal Ground Plane and 2 Vias in Thermal Pad | 10 | ||
| VIN - AGND | 6 | V | 7 | ||||
| PGND to AGND | -0.3 | 0.3 | V | 7 | |||
| Ambient Temp. with Power Applied | -40 | 85 | °C | 7 |
CAD (KiCad official)
- Symbol:
TC1303C-ZS0EMF - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tc1303c-zs0emf-etched.step/tc1303c-zs0emf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc1303c-zs0emf.step/tc1303c-zs0emf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (38 pp, sha256
9ccb545ec9b0a8b1, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).