main
Ray Publish 0.1.0 099566b

TC1263-3.3VETTR

Microchip Tech · Linear Voltage Regulators (LDO) · TO-252-5

TC1263-3.3VETTR from Microchip Tech, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BYPASS input Reference bypass input; connect a 470 pF capacitor to the BYPASS input to further reduce output noise.
2 SHDN input Shutdown control input; the regulator is fully enabled on a logic-high and enters shutdown on a logic-low, with supply current reduced to 0.05 µA (typical).
3 GND power_in Ground terminal; the tab is also GND on this package.
4 VIN power_in Unregulated supply input; input operating voltage range is 2.7 V to 6.0 V.
5 VOUT power_out Regulated voltage output; maximum output current is 500 mA.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TO-252-5
Category Power Management
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.7 6 V Note 2 2
Maximum Output Current IOUTMAX 500 mA 2
Line Regulation VOUT/VIN 0.05 0.35 % (VR + 1V) VIN 6V 2
Load Regulation VOUT/VOUT -0.01 0.002 0.01 %/mA IL = 0.1 mA to IOUTMAX 2
Dropout Voltage VIN-VOUT 20 30 mV IL = 100 µA 2
Dropout Voltage VIN-VOUT 60 130 mV IL = 100 mA 2
Dropout Voltage VIN-VOUT 200 390 mV IL = 300 mA 2
Dropout Voltage VIN-VOUT 350 650 mV IL = 500 mA 2
Supply Current IDD 80 130 µA SHDN = VIH, IL = 0 2
Shutdown Supply Current ISHDN 0.05 1 µA SHDN = 0V 2
Output Short Circuit Current IOUTSC 1200 1400 mA VOUT = 0V 2
SHDN Input High Threshold VIH 45 %VIN 3
SHDN Input Low Threshold VIL 15 %VIN 3
Minimum Operating Voltage (ERROR) VMIN 1 V 3
Output Logic Low Voltage (ERROR) VOL 400 mV 1 mA Flows to ERROR 3
ERROR Positive Hysteresis VHYS 50 mV 3
VOUT Temperature Coefficient VOUT/T 40 ppm/°C Note 3 2
Power Supply Rejection Ratio PSRR 64 db F 1 kHz 2
Thermal Regulation VOUT/PD 0.04 V/W Note 6 2
Output Noise eN 260 nV/Hz IL = IOUTMAX, F = 10 kHZ 2
Specified Temperature Range TA -40 125 °C Note 1 3
Operating Temperature Range TJ -40 125 °C 3
Storage Temperature Range TA -65 150 °C 3
Thermal Resistance, 5L-DDPAK JA 57 °C/W 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN), Narrow, 150 mil Body (SOIC) Foot Angle  048048 12

CAD (KiCad official)

  • Symbol: TC1263-3.3VETTR
  • Footprint: Package_TO_SOT_SMD:TO-252-5_TabPin6
  • 3D model: TO-252-5 (KiCad packages3D, STEP)
  • 3D model files: tc1263-3-3vettr-etched.step / tc1263-3-3vettr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc1263-3-3vettr.step / tc1263-3-3vettr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (18 pp, sha256 2e544c4c3c0b1427, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF