Generated by kicad-footprint-generator · KiCad file format 20260206
TC1263-3.3VETTR
Microchip Tech · Linear Voltage Regulators (LDO) · TO-252-5
TC1263-3.3VETTR from Microchip Tech, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BYPASS | input | Reference bypass input; connect a 470 pF capacitor to the BYPASS input to further reduce output noise. |
| 2 | SHDN | input | Shutdown control input; the regulator is fully enabled on a logic-high and enters shutdown on a logic-low, with supply current reduced to 0.05 µA (typical). |
| 3 | GND | power_in | Ground terminal; the tab is also GND on this package. |
| 4 | VIN | power_in | Unregulated supply input; input operating voltage range is 2.7 V to 6.0 V. |
| 5 | VOUT | power_out | Regulated voltage output; maximum output current is 500 mA. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-252-5 |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.7 | 6 | V | Note 2 | 2 | |
| Maximum Output Current | IOUTMAX | 500 | mA | 2 | |||
| Line Regulation | VOUT/VIN | 0.05 | 0.35 | % | (VR + 1V) VIN 6V | 2 | |
| Load Regulation | VOUT/VOUT | -0.01 | 0.002 | 0.01 | %/mA | IL = 0.1 mA to IOUTMAX | 2 |
| Dropout Voltage | VIN-VOUT | 20 | 30 | mV | IL = 100 µA | 2 | |
| Dropout Voltage | VIN-VOUT | 60 | 130 | mV | IL = 100 mA | 2 | |
| Dropout Voltage | VIN-VOUT | 200 | 390 | mV | IL = 300 mA | 2 | |
| Dropout Voltage | VIN-VOUT | 350 | 650 | mV | IL = 500 mA | 2 | |
| Supply Current | IDD | 80 | 130 | µA | SHDN = VIH, IL = 0 | 2 | |
| Shutdown Supply Current | ISHDN | 0.05 | 1 | µA | SHDN = 0V | 2 | |
| Output Short Circuit Current | IOUTSC | 1200 | 1400 | mA | VOUT = 0V | 2 | |
| SHDN Input High Threshold | VIH | 45 | %VIN | 3 | |||
| SHDN Input Low Threshold | VIL | 15 | %VIN | 3 | |||
| Minimum Operating Voltage (ERROR) | VMIN | 1 | V | 3 | |||
| Output Logic Low Voltage (ERROR) | VOL | 400 | mV | 1 mA Flows to ERROR | 3 | ||
| ERROR Positive Hysteresis | VHYS | 50 | mV | 3 | |||
| VOUT Temperature Coefficient | VOUT/T | 40 | ppm/°C | Note 3 | 2 | ||
| Power Supply Rejection Ratio | PSRR | 64 | db | F 1 kHz | 2 | ||
| Thermal Regulation | VOUT/PD | 0.04 | V/W | Note 6 | 2 | ||
| Output Noise | eN | 260 | nV/Hz | IL = IOUTMAX, F = 10 kHZ | 2 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | Note 1 | 3 | |
| Operating Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 3 | ||
| Thermal Resistance, 5L-DDPAK | JA | 57 | °C/W | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN), Narrow, 150 mil Body (SOIC) Foot Angle 048048 | 12 |
CAD (KiCad official)
- Symbol:
TC1263-3.3VETTR - Footprint:
Package_TO_SOT_SMD:TO-252-5_TabPin6 - 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files:
tc1263-3-3vettr-etched.step/tc1263-3-3vettr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc1263-3-3vettr.step/tc1263-3-3vettr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (18 pp, sha256
2e544c4c3c0b1427, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).