TC1232EOA713

{
  "slug": "tc1232eoa713",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Monitors & Reset Circuits, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "tc1232eoa713",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tc1232eoa713.kicad_sym",
    "tc1232eoa713.kicad_mod",
    "tc1232eoa713.glb",
    "tc1232eoa713.step",
    "tc1232eoa713.lbr",
    "docs/hero.png",
    "docs/tc1232eoa713-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tc1232eoa713-hero.glb",
    "tc1232eoa713-hero.overlay.json",
    "tc1232eoa713-etched.glb"
  ],
  "component": {
    "mpn": "TC1232EOA713",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management ICs",
    "subcategory": "Monitors & Reset Circuits",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/d9dd357afccd492abc8450078cf33c3b.pdf",
    "parts": {
      "symbol": "tc1232eoa713.kicad_sym",
      "footprint": "tc1232eoa713.kicad_mod",
      "model_3d": "tc1232eoa713-hero.glb",
      "model_3d_plain": "tc1232eoa713-etched.glb",
      "model_3d_step": "tc1232eoa713-etched.step",
      "model_3d_step_plain": "tc1232eoa713.step",
      "lbr": "tc1232eoa713.lbr"
    },
    "distributor_links": {
      "lcsc": "C7684",
      "digikey": "TC1232EOA713TR-ND",
      "mouser": "579-TC1232EOA713"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T22:27:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "TC1232EOA713TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "579-TC1232EOA713",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PB RST",
        "type": "input",
        "description": "Push button reset input that ignores pulses shorter than 1 ms, recognizes pulses of 20 ms or greater, and forces both reset outputs active while driven low."
      },
      {
        "number": "2",
        "name": "TD",
        "type": "input",
        "description": "Time delay input that sets the watchdog time-out to 150 ms with TD at GND, 600 ms when open, and 1.2 s when tied to VCC."
      },
      {
        "number": "3",
        "name": "TOL",
        "type": "input",
        "description": "Tolerance input that sets the VCC trip point to 4.75V (5% tolerance) when tied to GND and 4.5V (10% tolerance) when tied to VCC."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "The ground reference for the device."
      },
      {
        "number": "5",
        "name": "RST",
        "type": "output",
        "description": "Push-pull active-high reset output that goes high if VCC falls below the selected threshold, PB RST is forced low, the ST input is not strobed within the time-out period, or during power-up."
      },
      {
        "number": "6",
        "name": "RST",
        "type": "output",
        "description": "Open-drain active-low reset output that goes low under the same conditions as RST (VCC below threshold, PB RST forced low, missed ST strobe, or power-up)."
      },
      {
        "number": "7",
        "name": "ST",
        "type": "input",
        "description": "Watchdog strobe input in which each falling edge resets the watchdog timer counter; a time-out forces the reset outputs active for at least 250 ms."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "The positive supply (+5V nominal) for the device, specified for an operating voltage of 4.0V to 5.5V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: KiCad ERC has no open-drain class in the allowed types, so RST (open-drain, active-low) is classed a; The 8-lead SOIC pinout is taken from the shared 8-pin PDIP/SOIC column of Table 3-1 (page 6). Pin nu"
        ],
        "pages_sent": 24,
        "cost_usd": 0.0688,
        "at": "2026-10-28T22:27:31"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/d9dd357afccd492abc8450078cf33c3b.pdf",
        "pages": 24,
        "sha256": "bf8a3940fbb9a6ff",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tc1232eoa713.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tc1232eoa713-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f99bd4d7b8ad4a531510eb6430233123f42bac8ddb7b4a9d6957fececd1fc17b",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}