main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tc1072-1-8vch713: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tc1072-1-8vch713-etched.glb Publish 0.1.0 · Ray
tc1072-1-8vch713-etched.step tc1072-1-8vch713: factory component page (tier=mfr) · Ray
tc1072-1-8vch713-hero.glb tc1072-1-8vch713: hero GLB from the etched model (keeps the MPN mark) · Ray
tc1072-1-8vch713-hero.overlay.json Publish 0.1.0 · Ray
tc1072-1-8vch713.glb Publish 0.1.0 · Ray
tc1072-1-8vch713.kicad_mod Publish 0.1.0 · Ray
tc1072-1-8vch713.kicad_sym Publish 0.1.0 · Ray
tc1072-1-8vch713.lbr Publish 0.1.0 · Ray
tc1072-1-8vch713.step Publish 0.1.0 · Ray

TC1072-1.8VCH713

Microchip Tech · Linear Voltage Regulators (LDO) · SOT-23-6

TC1072-1.8VCH713 from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated supply input accepting 2.7 V to 6.0 V; a 1 µF capacitor to ground is recommended for most applications.
2 GND power_in Ground terminal for the input supply return, the input capacitor and the output capacitor COUT.
3 SHDN input Shutdown control input that enables the regulator when high (VIH min 45% of VIN) and shuts it down when low (VIL max 15% of VIN), reducing supply current to 0.5 µA max.
4 ERROR output Open-drain out-of-regulation flag that goes low when VOUT is about 5% out of tolerance (VOL max 400 mV at 1 mA) and is open-circuited in shutdown.
5 Bypass passive Reference bypass input where a 470 pF capacitor to ground further reduces output noise; it may be left unconnected if noise is not a concern.
6 VOUT power_out Regulated voltage output (1.8 V for this MPN) that needs an output capacitor of at least 1 µF placed close to the pin.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category Power Management
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.7 6 V Note 9 2
Maximum Output Current IOUTMAX 50 mA TC1072 2
Output Voltage tolerance (relative to VR) VOUT -2.5 0.5 2.5 % Note 1; VR - 2.5% to VR + 2.5%, typ VR ±0.5% 2
Line Regulation ΔVOUT/ΔVIN 0.05 0.35 % (VR + 1V) ≤ VIN ≤ 6V 2
Load Regulation ΔVOUT/VOUT 0.5 2 % IL = 0.1 mA to IOUTMAX (Note 3) 2
Dropout Voltage VIN-VOUT 85 120 mV IL = 50 mA 2
Supply Current IIN 50 80 µA SHDN =VIH, IL = 0 (Note 8) 2
Shutdown Supply Current IINSD 0.05 0.5 µA SHDN = 0V 2
Output Short Circuit Current IOUTSC 300 450 mA VOUT = 0V 2
SHDN Input High Threshold VIH 45 %VIN VIN = 2.5V to 6.5V 3
SHDN Input Low Threshold VIL 15 %VIN VIN = 2.5V to 6.5V 3
ERROR Minimum VIN Operating Voltage VINMIN 1 V 3
ERROR Output Logic Low Voltage VOL 400 mV 1 mA Flows to ERROR 3
Absolute Maximum Input Voltage VIN 6.5 V 2
Absolute Maximum Output Voltage VOUT -0.3 V (-0.3V) to (VIN + 0.3V) 2
Operating Temperature Range TJ -40 125 °C 2
Storage Temperature -65 150 °C 2
VOUT Temperature Coefficient placeholder omitted θJA 220 °C/W 6-Pin SOT-23, approximately 13
Dropout Voltage VIN-VOUT 2 mV IL = 0.1 mA 2
Dropout Voltage VIN-VOUT 65 mV IL = 20 mA 2
Power Supply Rejection Ratio PSRR 64 dB FRE ≤ 1 kHz 2
Thermal Shutdown Die Temperature TSD 160 °C 2

CAD (KiCad official)

  • Symbol: TC1072-1.8VCH713
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: tc1072-1-8vch713-etched.step / tc1072-1-8vch713-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc1072-1-8vch713.step / tc1072-1-8vch713.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (22 pp, sha256 f8968bb5712949e0, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF