3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTC1072-1.8VCH713
Microchip Tech · Linear Voltage Regulators (LDO) · SOT-23-6
TC1072-1.8VCH713 from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated supply input accepting 2.7 V to 6.0 V; a 1 µF capacitor to ground is recommended for most applications. |
| 2 | GND | power_in | Ground terminal for the input supply return, the input capacitor and the output capacitor COUT. |
| 3 | SHDN | input | Shutdown control input that enables the regulator when high (VIH min 45% of VIN) and shuts it down when low (VIL max 15% of VIN), reducing supply current to 0.5 µA max. |
| 4 | ERROR | output | Open-drain out-of-regulation flag that goes low when VOUT is about 5% out of tolerance (VOL max 400 mV at 1 mA) and is open-circuited in shutdown. |
| 5 | Bypass | passive | Reference bypass input where a 470 pF capacitor to ground further reduces output noise; it may be left unconnected if noise is not a concern. |
| 6 | VOUT | power_out | Regulated voltage output (1.8 V for this MPN) that needs an output capacitor of at least 1 µF placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.7 | 6 | V | Note 9 | 2 | |
| Maximum Output Current | IOUTMAX | 50 | mA | TC1072 | 2 | ||
| Output Voltage tolerance (relative to VR) | VOUT | -2.5 | 0.5 | 2.5 | % | Note 1; VR - 2.5% to VR + 2.5%, typ VR ±0.5% | 2 |
| Line Regulation | ΔVOUT/ΔVIN | 0.05 | 0.35 | % | (VR + 1V) ≤ VIN ≤ 6V | 2 | |
| Load Regulation | ΔVOUT/VOUT | 0.5 | 2 | % | IL = 0.1 mA to IOUTMAX (Note 3) | 2 | |
| Dropout Voltage | VIN-VOUT | 85 | 120 | mV | IL = 50 mA | 2 | |
| Supply Current | IIN | 50 | 80 | µA | SHDN =VIH, IL = 0 (Note 8) | 2 | |
| Shutdown Supply Current | IINSD | 0.05 | 0.5 | µA | SHDN = 0V | 2 | |
| Output Short Circuit Current | IOUTSC | 300 | 450 | mA | VOUT = 0V | 2 | |
| SHDN Input High Threshold | VIH | 45 | %VIN | VIN = 2.5V to 6.5V | 3 | ||
| SHDN Input Low Threshold | VIL | 15 | %VIN | VIN = 2.5V to 6.5V | 3 | ||
| ERROR Minimum VIN Operating Voltage | VINMIN | 1 | V | 3 | |||
| ERROR Output Logic Low Voltage | VOL | 400 | mV | 1 mA Flows to ERROR | 3 | ||
| Absolute Maximum Input Voltage | VIN | 6.5 | V | 2 | |||
| Absolute Maximum Output Voltage | VOUT | -0.3 | V | (-0.3V) to (VIN + 0.3V) | 2 | ||
| Operating Temperature Range | TJ | -40 | 125 | °C | 2 | ||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| VOUT Temperature Coefficient placeholder omitted | θJA | 220 | °C/W | 6-Pin SOT-23, approximately | 13 | ||
| Dropout Voltage | VIN-VOUT | 2 | mV | IL = 0.1 mA | 2 | ||
| Dropout Voltage | VIN-VOUT | 65 | mV | IL = 20 mA | 2 | ||
| Power Supply Rejection Ratio | PSRR | 64 | dB | FRE ≤ 1 kHz | 2 | ||
| Thermal Shutdown Die Temperature | TSD | 160 | °C | 2 |
CAD (KiCad official)
- Symbol:
TC1072-1.8VCH713 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tc1072-1-8vch713-etched.step/tc1072-1-8vch713-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc1072-1-8vch713.step/tc1072-1-8vch713.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
f8968bb5712949e0, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).