Generated by kicad-footprint-generator · KiCad file format 20260206
TBD62783APG
TOSHIBA · Power Distribution Switches · DIP-18
TBD62783APG from TOSHIBA, in a DIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I1 | input | Input pin for channel 1; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V. |
| 2 | I2 | input | Input pin for channel 2; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V. |
| 3 | I3 | input | Input pin for channel 3; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V. |
| 4 | I4 | input | Input pin for channel 4; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V. |
| 5 | I5 | input | Input pin for channel 5; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V. |
| 6 | I6 | input | Input pin for channel 6; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V. |
| 7 | I7 | input | Input pin for channel 7; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V. |
| 8 | I8 | input | Input pin for channel 8; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V. |
| 9 | VCC | power_in | Power supply pin; operating supply range is 2.0 V to 50 V and the absolute maximum rating is −0.5 to 50 V. |
| 10 | GND | power_in | Ground pin for the driver array. |
| 11 | O8 | output | DMOS source-type output for channel 8, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads. |
| 12 | O7 | output | DMOS source-type output for channel 7, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads. |
| 13 | O6 | output | DMOS source-type output for channel 6, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads. |
| 14 | O5 | output | DMOS source-type output for channel 5, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads. |
| 15 | O4 | output | DMOS source-type output for channel 4, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads. |
| 16 | O3 | output | DMOS source-type output for channel 3, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads. |
| 17 | O2 | output | DMOS source-type output for channel 2, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads. |
| 18 | O1 | output | DMOS source-type output for channel 1, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | DIP-18 |
| Category | Power Supply Chip |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | 2 | 50 | V | IOUT = -100 mA | 4 | |
| Output current (for each channel), 1 circuit ON, PG | IOUT | 0 | -400 | mA | 1 circuits ON, Ta = 25°C, tpw = 25 ms | 4 | |
| Output current (for each channel), 8 circuits ON, PG, Duty 10% | IOUT | 0 | -390 | mA | 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 4 | |
| Output current (for each channel), 8 circuits ON, PG, Duty 50% | IOUT | 0 | -170 | mA | 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 4 | |
| Input voltage (output on) | VIN(ON) | 2 | 25 | V | IOUT = -100 mA or upper, VDS = 2.0 V | 4 | |
| Input voltage (output off) | VIN(OFF) | 0 | 0.6 | V | IOUT = -100 μA or less, VDS = 2.0 V | 4 | |
| Clamp diode forward current | IF | 400 | mA | 4 | |||
| Power supply voltage | VCC | -0.5 | 50 | V | 3 | ||
| Output current (for each channel) | IOUT | -500 | mA | for each channel | 3 | ||
| Input voltage | VIN | -0.5 | 30 | V | 3 | ||
| Clamp diode reverse voltage | VR | 50 | V | 3 | |||
| Clamp diode forward current | IF | 500 | mA | 3 | |||
| Power dissipation, PG package | PD | 1.47 | W | PG (Note1) device alone; derate 11.8 mW/°C when Ta exceeds 25°C | 3 | ||
| Operating temperature | Topr | -40 | 85 | °C | 3 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| Output leakage current | Ileak | 1 | μA | VCC = 50 V, VIN = 0 V, Ta = 85°C | 5 | ||
| Output voltage (IOUT = -350 mA) | VDS(RON) | 0.56 | 1.14 | V | IOUT = -350 mA, VIN = 5.0 V, VCC = 5.0 V | 5 | |
| Output ON-resistance (IOUT = -350 mA) | RON | 1.6 | 3.25 | Ω | IOUT = -350 mA, VIN = 5.0 V, VCC = 5.0 V | 5 | |
| Output voltage (IOUT = -200 mA) | VDS(RON) | 0.32 | 0.65 | V | IOUT = -200 mA, VIN = 5.0 V, VCC = 5.0 V | 5 | |
| Output ON-resistance (IOUT = -200 mA) | RON | 1.6 | 3.25 | Ω | IOUT = -200 mA, VIN = 5.0 V, VCC = 5.0 V | 5 | |
| Output voltage (IOUT = -100 mA) | VDS(RON) | 0.16 | 0.325 | V | IOUT = -100 mA, VIN = 5.0 V, VCC = 5.0 V | 5 | |
| Output ON-resistance (IOUT = -100 mA) | RON | 1.6 | 3.25 | Ω | IOUT = -100 mA, VIN = 5.0 V, VCC = 5.0 V | 5 | |
| Input current (output on) | IIN(ON) | 0.1 | mA | VIN = 2.0 V | 5 | ||
| Input current (output off) | IIN(OFF) | 1 | μA | VIN = 0 V, Ta = 85°C | 5 | ||
| Input voltage (output on) | VIN(ON) | 2 | V | IOUT = -100 mA or upper, VDS = 2.0 V | 5 | ||
| Supply current (for each channel) | ICC | 1.5 | mA | VIN = 2.0 V, VCC = 50 V, output open | 5 | ||
| Clamp diode reverse current | IR | 1 | μA | VR = 50 V, Ta = 85°C | 5 | ||
| Clamp diode forward voltage | VF | 2 | V | IF = 350 mA | 5 |
CAD (KiCad official)
- Symbol:
TBD62783APG - Footprint:
Package_DIP:DIP-18_W7.62mm - 3D model: DIP-18 (KiCad packages3D, STEP)
- 3D model files:
tbd62783apg-etched.step/tbd62783apg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tbd62783apg.step/tbd62783apg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TOSHIBA datasheet (11 pp, sha256
ee20d1fb3e394b27, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).