Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TBD62783APG

TOSHIBA · Power Distribution Switches · DIP-18

TBD62783APG from TOSHIBA, in a DIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 I1 input Input pin for channel 1; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V.
2 I2 input Input pin for channel 2; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V.
3 I3 input Input pin for channel 3; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V.
4 I4 input Input pin for channel 4; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V.
5 I5 input Input pin for channel 5; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V.
6 I6 input Input pin for channel 6; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V.
7 I7 input Input pin for channel 7; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V.
8 I8 input Input pin for channel 8; VIN(ON) must be at least 2.0 V for the output to turn on and VIN(OFF) at most 0.6 V for it to turn off, with absolute maximum input voltage of −0.5 to 30 V.
9 VCC power_in Power supply pin; operating supply range is 2.0 V to 50 V and the absolute maximum rating is −0.5 to 50 V.
10 GND power_in Ground pin for the driver array.
11 O8 output DMOS source-type output for channel 8, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads.
12 O7 output DMOS source-type output for channel 7, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads.
13 O6 output DMOS source-type output for channel 6, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads.
14 O5 output DMOS source-type output for channel 5, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads.
15 O4 output DMOS source-type output for channel 4, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads.
16 O3 output DMOS source-type output for channel 3, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads.
17 O2 output DMOS source-type output for channel 2, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads.
18 O1 output DMOS source-type output for channel 1, rated up to 50 V (VOUT) and −500 mA per channel (IOUT) with a built-in clamp diode for inductive loads.

Key specifications

Parameter Value
Manufacturer TOSHIBA
Package DIP-18
Category Power Supply Chip
Pins 18

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VCC 2 50 V IOUT = -100 mA 4
Output current (for each channel), 1 circuit ON, PG IOUT 0 -400 mA 1 circuits ON, Ta = 25°C, tpw = 25 ms 4
Output current (for each channel), 8 circuits ON, PG, Duty 10% IOUT 0 -390 mA 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% 4
Output current (for each channel), 8 circuits ON, PG, Duty 50% IOUT 0 -170 mA 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% 4
Input voltage (output on) VIN(ON) 2 25 V IOUT = -100 mA or upper, VDS = 2.0 V 4
Input voltage (output off) VIN(OFF) 0 0.6 V IOUT = -100 μA or less, VDS = 2.0 V 4
Clamp diode forward current IF 400 mA 4
Power supply voltage VCC -0.5 50 V 3
Output current (for each channel) IOUT -500 mA for each channel 3
Input voltage VIN -0.5 30 V 3
Clamp diode reverse voltage VR 50 V 3
Clamp diode forward current IF 500 mA 3
Power dissipation, PG package PD 1.47 W PG (Note1) device alone; derate 11.8 mW/°C when Ta exceeds 25°C 3
Operating temperature Topr -40 85 °C 3
Storage temperature Tstg -55 150 °C 3
Output leakage current Ileak 1 μA VCC = 50 V, VIN = 0 V, Ta = 85°C 5
Output voltage (IOUT = -350 mA) VDS(RON) 0.56 1.14 V IOUT = -350 mA, VIN = 5.0 V, VCC = 5.0 V 5
Output ON-resistance (IOUT = -350 mA) RON 1.6 3.25 Ω IOUT = -350 mA, VIN = 5.0 V, VCC = 5.0 V 5
Output voltage (IOUT = -200 mA) VDS(RON) 0.32 0.65 V IOUT = -200 mA, VIN = 5.0 V, VCC = 5.0 V 5
Output ON-resistance (IOUT = -200 mA) RON 1.6 3.25 Ω IOUT = -200 mA, VIN = 5.0 V, VCC = 5.0 V 5
Output voltage (IOUT = -100 mA) VDS(RON) 0.16 0.325 V IOUT = -100 mA, VIN = 5.0 V, VCC = 5.0 V 5
Output ON-resistance (IOUT = -100 mA) RON 1.6 3.25 Ω IOUT = -100 mA, VIN = 5.0 V, VCC = 5.0 V 5
Input current (output on) IIN(ON) 0.1 mA VIN = 2.0 V 5
Input current (output off) IIN(OFF) 1 μA VIN = 0 V, Ta = 85°C 5
Input voltage (output on) VIN(ON) 2 V IOUT = -100 mA or upper, VDS = 2.0 V 5
Supply current (for each channel) ICC 1.5 mA VIN = 2.0 V, VCC = 50 V, output open 5
Clamp diode reverse current IR 1 μA VR = 50 V, Ta = 85°C 5
Clamp diode forward voltage VF 2 V IF = 350 mA 5

CAD (KiCad official)

  • Symbol: TBD62783APG
  • Footprint: Package_DIP:DIP-18_W7.62mm
  • 3D model: DIP-18 (KiCad packages3D, STEP)
  • 3D model files: tbd62783apg-etched.step / tbd62783apg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tbd62783apg.step / tbd62783apg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TOSHIBA datasheet (11 pp, sha256 ee20d1fb3e394b27, retrieved 2026-10-16, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF