component
TAS5722LRSMR
Public Made by Adomby adom
Texas Instruments Audio Amplifiers, VQFN-32-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTAS5722LRSMR
Texas Instruments · Audio Amplifiers · VQFN-32-EP(4x4)
TAS5722LRSMR from Texas Instruments, in a VQFN-32-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VREF_N | power_in | Negative reference for the analog circuitry; connect to the negative pins of the VCOM and VREG decoupling capacitors. |
| 2 | FAULTZ | output | Open-drain active-low fault flag; pull up on the PCB with a resistor to DVDD. |
| 3 | SDZ | input | Active-low shutdown signal; assert low to hold the device inactive. |
| 4 | LRCLK | input | TDM interface left/right clock. |
| 5 | MCLK | input | Device master clock. |
| 6 | BCLK | input | TDM interface serial bit clock. |
| 7 | SDI | input | TDM interface data input. |
| 8 | SCL | input | I2C clock input; pull up on the PCB with a 2.4-kΩ resistor. |
| 9 | SDA | bidirectional | I2C bidirectional data; pull up on the PCB with a 2.4-kΩ resistor. |
| 10 | GND | power_in | Ground; connect to the PCB ground plane. |
| 11 | DVDD | power_in | Digital power supply; connect to a 1.8-V supply (1.65 V to 2 V recommended range) with external decoupling capacitor. |
| 12 | ADR1 | input | I2C address input; each pin detects a short to DVDD, a short to GND, a 22-kΩ connection to GND and a 22-kΩ connection to DVDD. |
| 13 | ADR0 | input | I2C address input; each pin detects a short to DVDD, a short to GND, a 22-kΩ connection to GND and a 22-kΩ connection to DVDD. |
| 14 | PVDD | power_in | Class-D amplifier power supply input; connect to the PVDD supply (4.5 V to 17 V) and decouple externally. |
| 15 | PVDD | power_in | Class-D amplifier power supply input; connect to the PVDD supply (4.5 V to 17 V) and decouple externally. |
| 16 | OUT_N | output | Class-D amplifier negative output. |
| 17 | OUT_N | output | Class-D amplifier negative output. |
| 18 | BST_N | power_in | Class-D amplifier negative bootstrap; connect a capacitor between BST_N and OUT_N. |
| 19 | PGND | power_in | Power ground; connect to the PCB ground plane. |
| 20 | PGND | power_in | Power ground; connect to the PCB ground plane. |
| 21 | PGND | power_in | Power ground; connect to the PCB ground plane. |
| 22 | PGND | power_in | Power ground; connect to the PCB ground plane. |
| 23 | BST_P | power_in | Class-D amplifier positive bootstrap; connect a capacitor between BST_P and OUT_P. |
| 24 | OUT_P | output | Class-D amplifier positive output. |
| 25 | OUT_P | output | Class-D amplifier positive output. |
| 26 | PVDD | power_in | Class-D amplifier power supply input; connect to the PVDD supply (4.5 V to 17 V) and decouple externally. |
| 27 | PVDD | power_in | Class-D amplifier power supply input; connect to the PVDD supply (4.5 V to 17 V) and decouple externally. |
| 28 | AVDD | power_in | Analog power supply input; connect directly to PVDD (4.5 V to 17 V). |
| 29 | GND | power_in | Ground; connect to the PCB ground plane. |
| 30 | GVDD | output | Class-D amplifier gate drive regulator output; connect the decoupling capacitor to the PCB ground plane. |
| 31 | VREG | output | Analog regulator output; connect the decoupling capacitor to the VREF_N pin. |
| 32 | VCOM | output | Common-mode reference output; connect the decoupling capacitor to the VREF_N pin. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32-EP(4x4) |
| Category | Amplifiers/Comparators |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
TAS5722LRSMR - Footprint:
Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm - 3D model: VQFN-32-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
tas5722lrsmr-etched.step/tas5722lrsmr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tas5722lrsmr.step/tas5722lrsmr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (56 pp, sha256
f14ddfddee69be77, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).