main
History Download
Ray Initial commit: component/tas2505irger 234bede

TAS2505IRGER

Texas Instruments · Audio Amplifiers · VQFN-24-EP(4x4)

TAS2505IRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SPI_SEL input Select SPI (high) or I2C (low) digital interface mode.
2 RST input Active low reset for logic, state machine, and digital filter.
3 AINL input Analog single-ended left input to mixer and headphone driver, 0.5 VRMS full-scale.
4 AINR input Analog single-ended right input to mixer and headphone driver, 0.5 VRMS full-scale.
5 NC unconnected No connection; leave unconnected.
6 AVSS power_in Analog ground reference, 0V.
7 AVDD power_out Analog core power supply, 1.5V to 1.95V.
8 LDO_SEL input Hardware control pin; connect to ground for proper device operation.
9 SPKM output Class D speaker driver inverting output in BTL configuration, minimum 4Ω load.
10 SPKVDD power_out Class D speaker driver power supply, 2.7V to 5.5V.
11 SPKVSS power_in Class D speaker driver power supply ground, 0V reference.
12 SPKP output Class D speaker driver non-inverting output in BTL configuration, minimum 4Ω load.
13 DIN input Audio serial data bus input for I2S, DSP, or TDM digital audio interface.
14 WCLK bidirectional Audio word clock; configurable as master output or slave input via registers.
15 BCLK bidirectional Audio bit clock; configurable as master output or slave input via registers.
16 MCLK input Master clock input or PLL reference for clock multiplier; 50 MHz maximum.
17 MISO output SPI serial data output when SPI_SEL pin is high.
18 GPIO/DOUT tri_state Programmable GPIO or secondary I2S data output with tri-state high-impedance capability.
19 SCL/SSZ input I2C serial clock (SPI_SEL low) or SPI chip select signal (SPI_SEL high).
20 SDA/MOSI input I2C serial data input (SPI_SEL low) or SPI master-out-slave-in (SPI_SEL high).
21 SCLK input SPI serial clock input; used only when SPI_SEL pin is high.
22 IOVDD power_out I/O power supply, 1.1V to 3.6V.
23 DVDD power_out Digital core power supply, 1.65V to 1.95V.
24 DVSS power_in Digital ground reference, 0V.
25 PAD power_in Exposed thermal pad; solder to printed circuit board for thermal and mechanical performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-24-EP(4x4)
Category Amplifiers/Comparators
Pins 25

CAD (KiCad official)

  • Symbol: TAS2505IRGER
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
  • 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: tas2505irger-etched.step / tas2505irger-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tas2505irger.step / tas2505irger.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 fb83b47ca772b982, retrieved 2026-09-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF