component
TAS2505IRGER
Public Made by Adomby adom
Texas Instruments Audio Amplifiers, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+62@@ -0,0 +1,62 @@+# TAS2505IRGER++**Texas Instruments** · Audio Amplifiers · VQFN-24-EP(4x4)++TAS2505IRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SPI_SEL | input | Select SPI (high) or I2C (low) digital interface mode. |+| 2 | RST | input | Active low reset for logic, state machine, and digital filter. |+| 3 | AINL | input | Analog single-ended left input to mixer and headphone driver, 0.5 VRMS full-scale. |+| 4 | AINR | input | Analog single-ended right input to mixer and headphone driver, 0.5 VRMS full-scale. |+| 5 | NC | unconnected | No connection; leave unconnected. |+| 6 | AVSS | power_in | Analog ground reference, 0V. |+| 7 | AVDD | power_out | Analog core power supply, 1.5V to 1.95V. |+| 8 | LDO_SEL | input | Hardware control pin; connect to ground for proper device operation. |+| 9 | SPKM | output | Class D speaker driver inverting output in BTL configuration, minimum 4Ω load. |+| 10 | SPKVDD | power_out | Class D speaker driver power supply, 2.7V to 5.5V. |+| 11 | SPKVSS | power_in | Class D speaker driver power supply ground, 0V reference. |+| 12 | SPKP | output | Class D speaker driver non-inverting output in BTL configuration, minimum 4Ω load. |+| 13 | DIN | input | Audio serial data bus input for I2S, DSP, or TDM digital audio interface. |+| 14 | WCLK | bidirectional | Audio word clock; configurable as master output or slave input via registers. |+| 15 | BCLK | bidirectional | Audio bit clock; configurable as master output or slave input via registers. |+| 16 | MCLK | input | Master clock input or PLL reference for clock multiplier; 50 MHz maximum. |+| 17 | MISO | output | SPI serial data output when SPI_SEL pin is high. |+| 18 | GPIO/DOUT | tri_state | Programmable GPIO or secondary I2S data output with tri-state high-impedance capability. |+| 19 | SCL/SSZ | input | I2C serial clock (SPI_SEL low) or SPI chip select signal (SPI_SEL high). |+| 20 | SDA/MOSI | input | I2C serial data input (SPI_SEL low) or SPI master-out-slave-in (SPI_SEL high). |+| 21 | SCLK | input | SPI serial clock input; used only when SPI_SEL pin is high. |+| 22 | IOVDD | power_out | I/O power supply, 1.1V to 3.6V. |+| 23 | DVDD | power_out | Digital core power supply, 1.65V to 1.95V. |+| 24 | DVSS | power_in | Digital ground reference, 0V. |+| 25 | PAD | power_in | Exposed thermal pad; solder to printed circuit board for thermal and mechanical performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(4x4) |+| Category | Amplifiers/Comparators |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `TAS2505IRGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `tas2505irger-etched.step` / `tas2505irger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tas2505irger.step` / `tas2505irger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tas2505) (37 pp, sha256 `fb83b47ca772b982`, retrieved 2026-09-26, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tas2505irger-datasheet.pdf)
page.jsonadded+260@@ -0,0 +1,260 @@+{+ "slug": "tas2505irger",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Audio Amplifiers, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "tas2505irger",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tas2505irger.kicad_sym",+ "tas2505irger.kicad_mod",+ "tas2505irger.glb",+ "tas2505irger.step",+ "tas2505irger.lbr",+ "docs/hero.png",+ "docs/tas2505irger-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TAS2505IRGER",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-24-EP(4x4)",+ "pin_count": 25,+ "category": "Amplifiers/Comparators",+ "subcategory": "Audio Amplifiers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tas2505",+ "parts": {+ "symbol": "tas2505irger.kicad_sym",+ "footprint": "tas2505irger.kicad_mod",+ "model_3d": "tas2505irger-etched.glb",+ "model_3d_plain": "tas2505irger.glb",+ "model_3d_step": "tas2505irger-etched.step",+ "model_3d_step_plain": "tas2505irger.step",+ "lbr": "tas2505irger.lbr"+ },+ "distributor_links": {+ "lcsc": "C2861514",+ "digikey": "296-49264-2-ND",+ "mouser": "595-TAS2505IRGER"+ },+ "distributor_check": {+ "checked_at": "2026-09-26T11:48:41Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-49264-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TAS2505IRGER",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "SPI_SEL",+ "type": "input",+ "description": "Select SPI (high) or I2C (low) digital interface mode."+ },+ {+ "number": "2",+ "name": "RST",+ "type": "input",+ "description": "Active low reset for logic, state machine, and digital filter."+ },+ {+ "number": "3",+ "name": "AINL",+ "type": "input",+ "description": "Analog single-ended left input to mixer and headphone driver, 0.5 VRMS full-scale."+ },+ {+ "number": "4",+ "name": "AINR",+ "type": "input",+ "description": "Analog single-ended right input to mixer and headphone driver, 0.5 VRMS full-scale."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave unconnected."+ },+ {+ "number": "6",+ "name": "AVSS",+ "type": "power_in",+ "description": "Analog ground reference, 0V."+ },+ {+ "number": "7",+ "name": "AVDD",+ "type": "power_out",+ "description": "Analog core power supply, 1.5V to 1.95V."+ },+ {+ "number": "8",+ "name": "LDO_SEL",+ "type": "input",+ "description": "Hardware control pin; connect to ground for proper device operation."+ },+ {+ "number": "9",+ "name": "SPKM",+ "type": "output",+ "description": "Class D speaker driver inverting output in BTL configuration, minimum 4Ω load."+ },+ {+ "number": "10",+ "name": "SPKVDD",+ "type": "power_out",+ "description": "Class D speaker driver power supply, 2.7V to 5.5V."+ },+ {+ "number": "11",+ "name": "SPKVSS",+ "type": "power_in",+ "description": "Class D speaker driver power supply ground, 0V reference."+ },+ {+ "number": "12",+ "name": "SPKP",+ "type": "output",+ "description": "Class D speaker driver non-inverting output in BTL configuration, minimum 4Ω load."+ },+ {+ "number": "13",+ "name": "DIN",+ "type": "input",+ "description": "Audio serial data bus input for I2S, DSP, or TDM digital audio interface."+ },+ {+ "number": "14",+ "name": "WCLK",+ "type": "bidirectional",+ "description": "Audio word clock; configurable as master output or slave input via registers."+ },+ {+ "number": "15",+ "name": "BCLK",+ "type": "bidirectional",+ "description": "Audio bit clock; configurable as master output or slave input via registers."+ },+ {+ "number": "16",+ "name": "MCLK",+ "type": "input",+ "description": "Master clock input or PLL reference for clock multiplier; 50 MHz maximum."+ },+ {+ "number": "17",+ "name": "MISO",+ "type": "output",+ "description": "SPI serial data output when SPI_SEL pin is high."+ },+ {+ "number": "18",+ "name": "GPIO/DOUT",+ "type": "tri_state",+ "description": "Programmable GPIO or secondary I2S data output with tri-state high-impedance capability."+ },+ {+ "number": "19",+ "name": "SCL/SSZ",+ "type": "input",+ "description": "I2C serial clock (SPI_SEL low) or SPI chip select signal (SPI_SEL high)."+ },+ {+ "number": "20",+ "name": "SDA/MOSI",+ "type": "input",+ "description": "I2C serial data input (SPI_SEL low) or SPI master-out-slave-in (SPI_SEL high)."+ },+ {+ "number": "21",+ "name": "SCLK",+ "type": "input",+ "description": "SPI serial clock input; used only when SPI_SEL pin is high."+ },+ {+ "number": "22",+ "name": "IOVDD",+ "type": "power_out",+ "description": "I/O power supply, 1.1V to 3.6V."+ },+ {+ "number": "23",+ "name": "DVDD",+ "type": "power_out",+ "description": "Digital core power supply, 1.65V to 1.95V."+ },+ {+ "number": "24",+ "name": "DVSS",+ "type": "power_in",+ "description": "Digital ground reference, 0V."+ },+ {+ "number": "25",+ "name": "PAD",+ "type": "power_in",+ "description": "Exposed thermal pad; solder to printed circuit board for thermal and mechanical performance."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 25 (exposed thermal pad) is shown in the mechanical package outline diagram (page 34) with numer"+ ],+ "pages_sent": 37,+ "cost_usd": 0.6212,+ "at": "2026-09-26T11:48:21"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tas2505",+ "pages": 37,+ "sha256": "fb83b47ca772b982",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}