main
Ray Publish 0.1.0 6ea7276

TAC5412WQRTVRQ1

Texas Instruments · IC · WQFN-32(5x5)

TAC5412WQRTVRQ1 from Texas Instruments, in a WQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSS power_in Ground pin, short directly to board ground plane.
2 DREG power_out Digital on-chip regulator output voltage for digital supply (1.5V, nominal).
3 BCLK bidirectional Audio serial data interface bus bit clock.
4 FSYNC bidirectional Audio serial data interface bus frame synchronization signal.
5 DOUT output Audio serial data interface bus output.
6 DIN input Audio serial data interface bus input.
7 IOVDD power_in Digital I/O power supply (1.2V, 1.8V or 3.3V, nominal).
8 IOVSS power_in Ground pin for digital I/O power supply, short directly to board ground plane.
9 SCL input Clock for I2C control interface (SCLK in SPI mode).
10 SDA bidirectional Data for I2C control interface (PICO in SPI mode).
11 GPIO1 bidirectional General-purpose digital input/output 1 (daisy-chain input, audio data output, PLL input clock source, interrupt, and so forth).
12 VBATIN input Analog VBAT input monitoring pin used for input diagnostics, 0 to 18V range.
13 BSTVDD power_in Boost converter supply voltage (3.3V, nominal).
14 BSTSW passive Boost converter switching pin.
15 BSTVSS power_in Ground pin for boost converter supply, short directly to board ground plane.
16 BSTOUT power_out Boost converter output voltage; external HVDD supply input of 5.6V to 12V in external HVDD mode.
17 MICBIAS power_out Microphone bias output, programmable up to 10V.
18 IN1P input Analog input 1P pin.
19 IN1M input Analog input 1M pin.
20 IN2P input Analog input 2P pin.
21 IN2M input Analog input 2M pin.
22 ADDRA input I2C address selection pin (CSZ chip select in SPI mode).
23 GPO1A output General-purpose digital output 1A (audio data output, interrupt, and so forth; POCI in SPI mode).
24 GPI2A input General-purpose digital input 2A (daisy-chain input, audio data input, PLL input clock source, and so forth).
25 GPI1A input General-purpose digital input 1A (daisy-chain input, audio data input, PLL input clock source, and so forth).
26 AVSS power_in Ground pin for analog power supply, short directly to board ground plane.
27 OUT1M output Analog output 1M pin.
28 OUT1P output Analog output 1P pin.
29 OUT2P output Analog output 2P pin.
30 OUT2M output Analog output 2M pin.
31 AVDD power_in Analog power supply (3.3V nominal, 3.0V to 3.6V).
32 VREF power_in Analog reference voltage filter output.
33 VSS power_in Exposed thermal pad shorted to internal device ground, short directly to board ground plane.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-32(5x5)
Category
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage AVDD to AVSS AVDD -0.3 3.9 V 6
Supply voltage BSTVDD to BSTVSS BSTVDD -0.3 3.9 V 6
Supply voltage IOVDD to IOVSS IOVDD -0.3 3.9 V 6
Supply voltage BSTOUT to BSTVSS BSTOUT -0.3 14 V External HVDD Mode 6
Ground voltage differences AVSS to VSS -0.3 0.3 V AVSS to VSS (thermal pad) 6
Battery voltage -0.3 18 V Between AVSS, IOVSS, BSTVSS and VSS (thermal pad) 6
Analog input voltage -0.3 18 V Analog input pins voltage to AVSS 6
Digital input voltage -0.3 V Digital input pins voltage to VSS (thermal pad); max IOVDD + 0.3 V 6
Operating ambient temperature (abs max) TA -40 125 °C 6
Junction temperature TJ -40 150 °C 6
Storage temperature Tstg -65 150 °C 6
ESD HBM V(ESD) -2000 2000 V Human-body model, AEC Q100-002 6
ESD CDM V(ESD) -500 500 V Charged-device model, AEC Q100-011 6
Analog supply voltage AVDD 3 3.3 3.6 V AVDD 3.3V operation 6
Boost converter supply voltage BSTVDD 3 3.3 3.6 V to BSTVSS 6
IO supply voltage 3.3V IOVDD 3 3.3 3.6 V IOVDD 3.3V operation 6
IO supply voltage 1.8V IOVDD 1.65 1.8 1.95 V IOVDD 1.8V operation 6
IO supply voltage 1.2V IOVDD 1.08 1.2 1.32 V IOVDD 1.2V operation 6
BSTOUT supply voltage BSTOUT 5.6 9 12 V to BSTVSS in external HVDD Mode 6
VBATIN input pin voltage VBATIN 0 12.6 18 V to AVSS 6
Analog input voltage, line-in INxx 0 14.2 V to AVSS for line-in recording 6
Operating ambient temperature TA -40 125 °C 6
CCLK input clock frequency 36.864 MHz GPIO1/GPIxx used as CCLK input 7
I2C bus capacitance, standard/fast mode Cb 400 pF SCL and SDA, standard-mode and fast-mode 7
I2C bus capacitance, fast-mode plus Cb 550 pF SCL and SDA, fast-mode plus 7
Digital output load capacitance CL 20 50 pF 7
Boost converter inductor 2.2 µH 7
Junction-to-ambient thermal resistance RθJA 39.7 °C/W RTV (WQFN) 32 pins 7
Junction-to-case (top) thermal resistance RθJC(top) 18.4 °C/W 7
Junction-to-board thermal resistance RθJB 19.5 °C/W 7
Junction-to-case (bottom) thermal resistance RθJC(bot) 11.5 °C/W 7
SNR differential AC-coupled SNR 100 112 dB IN1x differential AC-coupled input and AC signal shorted to ground, 0dB channel gain 7
Dynamic range differential AC-coupled DR 100 112 dB IN1x differential AC-coupled input and -60dBFS AC signal input, 0dB channel gain 8
THD+N differential AC-coupled THD+N -99 -80 dB IN1x differential AC-coupled input and -1dBFS AC signal input, 0dB channel gain 8
AC input impedance 34 kΩ Input pins INxP or INxM 8
Output data sample rate 4 768 kHz Programmable 8
Headphone output power Pout 62.5 mW Single-ended/Pseudo-differential headphone RL=16Ω, THD+N<0.1% 11
Low-level input voltage, IOVDD 1.8V/1.2V VIL -0.3 V All digital pins except GPI1A, GPI2A, ADDRA, SDA and SCL, IOVDD 1.8V or 1.2V operation; max 0.35 x IOVDD 11
Low-level input voltage, IOVDD 3.3V VIL -0.3 0.8 V All digital pins except GPI1A, GPI2A, ADDRA, SDA and SCL, IOVDD 3.3V operation 11
High-level input voltage, IOVDD 3.3V VIH 2 V All digital pins except GPI1A, GPI2A, ADDRA, SDA and SCL, IOVDD 3.3V operation; max IOVDD + 0.3 11
Low-level output voltage, IOVDD 3.3V VOL 0.4 V All digital pins except GPO1A, SDA and SCL, IOL = -2mA, IOVDD 3.3V operation 11
Low-level output voltage, IOVDD 1.8V/1.2V VOL 0.45 V All digital pins except GPO1A, SDA and SCL, IOL = -2mA, IOVDD 1.8V or 1.2V operation 11
High-level output voltage, IOVDD 3.3V VOH 2.4 V All digital pins except GPO1A, SDA and SCL, IOH = 2mA, IOVDD 3.3V operation 11
Input logic-low leakage IIL -5 0.1 5 µA All digital pins, input = 0V 11
Input logic-high leakage IIH -5 0.1 5 µA All digital pins, input = IOVDD 11
Input capacitance for digital inputs CIN 5 pF All digital pins 11
Pulldown resistance for digital I/O pins RPD 20 kΩ when asserted on 11
AVDD current in sleep mode IAVDD 9 µA All device external clocks stopped 12
SCL clock frequency, standard-mode fSCL 0 100 kHz Standard-mode 13
SCL clock frequency, fast-mode fSCL 0 400 kHz Fast-mode 13
SCL clock frequency, fast-mode plus fSCL 0 1000 kHz Fast-mode plus 13
SCLK period t(SCLK) 40 ns SPI 14
BCLK period t(BCLK) 40 ns TDM, I2S or LJ 14
PDMCLK clock frequency f(PDMCLK) 0.768 6.144 MHz 16

CAD (KiCad official)

  • Symbol: TAC5412WQRTVRQ1
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: WQFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: tac5412wqrtvrq1-etched.step / tac5412wqrtvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tac5412wqrtvrq1.step / tac5412wqrtvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (244 pp, sha256 a786c6566a98942f, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF