3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTAC5412WQRTVRQ1
Texas Instruments · IC · WQFN-32(5x5)
TAC5412WQRTVRQ1 from Texas Instruments, in a WQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground pin, short directly to board ground plane. |
| 2 | DREG | power_out | Digital on-chip regulator output voltage for digital supply (1.5V, nominal). |
| 3 | BCLK | bidirectional | Audio serial data interface bus bit clock. |
| 4 | FSYNC | bidirectional | Audio serial data interface bus frame synchronization signal. |
| 5 | DOUT | output | Audio serial data interface bus output. |
| 6 | DIN | input | Audio serial data interface bus input. |
| 7 | IOVDD | power_in | Digital I/O power supply (1.2V, 1.8V or 3.3V, nominal). |
| 8 | IOVSS | power_in | Ground pin for digital I/O power supply, short directly to board ground plane. |
| 9 | SCL | input | Clock for I2C control interface (SCLK in SPI mode). |
| 10 | SDA | bidirectional | Data for I2C control interface (PICO in SPI mode). |
| 11 | GPIO1 | bidirectional | General-purpose digital input/output 1 (daisy-chain input, audio data output, PLL input clock source, interrupt, and so forth). |
| 12 | VBATIN | input | Analog VBAT input monitoring pin used for input diagnostics, 0 to 18V range. |
| 13 | BSTVDD | power_in | Boost converter supply voltage (3.3V, nominal). |
| 14 | BSTSW | passive | Boost converter switching pin. |
| 15 | BSTVSS | power_in | Ground pin for boost converter supply, short directly to board ground plane. |
| 16 | BSTOUT | power_out | Boost converter output voltage; external HVDD supply input of 5.6V to 12V in external HVDD mode. |
| 17 | MICBIAS | power_out | Microphone bias output, programmable up to 10V. |
| 18 | IN1P | input | Analog input 1P pin. |
| 19 | IN1M | input | Analog input 1M pin. |
| 20 | IN2P | input | Analog input 2P pin. |
| 21 | IN2M | input | Analog input 2M pin. |
| 22 | ADDRA | input | I2C address selection pin (CSZ chip select in SPI mode). |
| 23 | GPO1A | output | General-purpose digital output 1A (audio data output, interrupt, and so forth; POCI in SPI mode). |
| 24 | GPI2A | input | General-purpose digital input 2A (daisy-chain input, audio data input, PLL input clock source, and so forth). |
| 25 | GPI1A | input | General-purpose digital input 1A (daisy-chain input, audio data input, PLL input clock source, and so forth). |
| 26 | AVSS | power_in | Ground pin for analog power supply, short directly to board ground plane. |
| 27 | OUT1M | output | Analog output 1M pin. |
| 28 | OUT1P | output | Analog output 1P pin. |
| 29 | OUT2P | output | Analog output 2P pin. |
| 30 | OUT2M | output | Analog output 2M pin. |
| 31 | AVDD | power_in | Analog power supply (3.3V nominal, 3.0V to 3.6V). |
| 32 | VREF | power_in | Analog reference voltage filter output. |
| 33 | VSS | power_in | Exposed thermal pad shorted to internal device ground, short directly to board ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-32(5x5) |
| Category | |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage AVDD to AVSS | AVDD | -0.3 | 3.9 | V | 6 | ||
| Supply voltage BSTVDD to BSTVSS | BSTVDD | -0.3 | 3.9 | V | 6 | ||
| Supply voltage IOVDD to IOVSS | IOVDD | -0.3 | 3.9 | V | 6 | ||
| Supply voltage BSTOUT to BSTVSS | BSTOUT | -0.3 | 14 | V | External HVDD Mode | 6 | |
| Ground voltage differences AVSS to VSS | -0.3 | 0.3 | V | AVSS to VSS (thermal pad) | 6 | ||
| Battery voltage | -0.3 | 18 | V | Between AVSS, IOVSS, BSTVSS and VSS (thermal pad) | 6 | ||
| Analog input voltage | -0.3 | 18 | V | Analog input pins voltage to AVSS | 6 | ||
| Digital input voltage | -0.3 | V | Digital input pins voltage to VSS (thermal pad); max IOVDD + 0.3 V | 6 | |||
| Operating ambient temperature (abs max) | TA | -40 | 125 | °C | 6 | ||
| Junction temperature | TJ | -40 | 150 | °C | 6 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human-body model, AEC Q100-002 | 6 | |
| ESD CDM | V(ESD) | -500 | 500 | V | Charged-device model, AEC Q100-011 | 6 | |
| Analog supply voltage | AVDD | 3 | 3.3 | 3.6 | V | AVDD 3.3V operation | 6 |
| Boost converter supply voltage | BSTVDD | 3 | 3.3 | 3.6 | V | to BSTVSS | 6 |
| IO supply voltage 3.3V | IOVDD | 3 | 3.3 | 3.6 | V | IOVDD 3.3V operation | 6 |
| IO supply voltage 1.8V | IOVDD | 1.65 | 1.8 | 1.95 | V | IOVDD 1.8V operation | 6 |
| IO supply voltage 1.2V | IOVDD | 1.08 | 1.2 | 1.32 | V | IOVDD 1.2V operation | 6 |
| BSTOUT supply voltage | BSTOUT | 5.6 | 9 | 12 | V | to BSTVSS in external HVDD Mode | 6 |
| VBATIN input pin voltage | VBATIN | 0 | 12.6 | 18 | V | to AVSS | 6 |
| Analog input voltage, line-in | INxx | 0 | 14.2 | V | to AVSS for line-in recording | 6 | |
| Operating ambient temperature | TA | -40 | 125 | °C | 6 | ||
| CCLK input clock frequency | 36.864 | MHz | GPIO1/GPIxx used as CCLK input | 7 | |||
| I2C bus capacitance, standard/fast mode | Cb | 400 | pF | SCL and SDA, standard-mode and fast-mode | 7 | ||
| I2C bus capacitance, fast-mode plus | Cb | 550 | pF | SCL and SDA, fast-mode plus | 7 | ||
| Digital output load capacitance | CL | 20 | 50 | pF | 7 | ||
| Boost converter inductor | 2.2 | µH | 7 | ||||
| Junction-to-ambient thermal resistance | RθJA | 39.7 | °C/W | RTV (WQFN) 32 pins | 7 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 18.4 | °C/W | 7 | |||
| Junction-to-board thermal resistance | RθJB | 19.5 | °C/W | 7 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 11.5 | °C/W | 7 | |||
| SNR differential AC-coupled | SNR | 100 | 112 | dB | IN1x differential AC-coupled input and AC signal shorted to ground, 0dB channel gain | 7 | |
| Dynamic range differential AC-coupled | DR | 100 | 112 | dB | IN1x differential AC-coupled input and -60dBFS AC signal input, 0dB channel gain | 8 | |
| THD+N differential AC-coupled | THD+N | -99 | -80 | dB | IN1x differential AC-coupled input and -1dBFS AC signal input, 0dB channel gain | 8 | |
| AC input impedance | 34 | kΩ | Input pins INxP or INxM | 8 | |||
| Output data sample rate | 4 | 768 | kHz | Programmable | 8 | ||
| Headphone output power | Pout | 62.5 | mW | Single-ended/Pseudo-differential headphone RL=16Ω, THD+N<0.1% | 11 | ||
| Low-level input voltage, IOVDD 1.8V/1.2V | VIL | -0.3 | V | All digital pins except GPI1A, GPI2A, ADDRA, SDA and SCL, IOVDD 1.8V or 1.2V operation; max 0.35 x IOVDD | 11 | ||
| Low-level input voltage, IOVDD 3.3V | VIL | -0.3 | 0.8 | V | All digital pins except GPI1A, GPI2A, ADDRA, SDA and SCL, IOVDD 3.3V operation | 11 | |
| High-level input voltage, IOVDD 3.3V | VIH | 2 | V | All digital pins except GPI1A, GPI2A, ADDRA, SDA and SCL, IOVDD 3.3V operation; max IOVDD + 0.3 | 11 | ||
| Low-level output voltage, IOVDD 3.3V | VOL | 0.4 | V | All digital pins except GPO1A, SDA and SCL, IOL = -2mA, IOVDD 3.3V operation | 11 | ||
| Low-level output voltage, IOVDD 1.8V/1.2V | VOL | 0.45 | V | All digital pins except GPO1A, SDA and SCL, IOL = -2mA, IOVDD 1.8V or 1.2V operation | 11 | ||
| High-level output voltage, IOVDD 3.3V | VOH | 2.4 | V | All digital pins except GPO1A, SDA and SCL, IOH = 2mA, IOVDD 3.3V operation | 11 | ||
| Input logic-low leakage | IIL | -5 | 0.1 | 5 | µA | All digital pins, input = 0V | 11 |
| Input logic-high leakage | IIH | -5 | 0.1 | 5 | µA | All digital pins, input = IOVDD | 11 |
| Input capacitance for digital inputs | CIN | 5 | pF | All digital pins | 11 | ||
| Pulldown resistance for digital I/O pins | RPD | 20 | kΩ | when asserted on | 11 | ||
| AVDD current in sleep mode | IAVDD | 9 | µA | All device external clocks stopped | 12 | ||
| SCL clock frequency, standard-mode | fSCL | 0 | 100 | kHz | Standard-mode | 13 | |
| SCL clock frequency, fast-mode | fSCL | 0 | 400 | kHz | Fast-mode | 13 | |
| SCL clock frequency, fast-mode plus | fSCL | 0 | 1000 | kHz | Fast-mode plus | 13 | |
| SCLK period | t(SCLK) | 40 | ns | SPI | 14 | ||
| BCLK period | t(BCLK) | 40 | ns | TDM, I2S or LJ | 14 | ||
| PDMCLK clock frequency | f(PDMCLK) | 0.768 | 6.144 | MHz | 16 |
CAD (KiCad official)
- Symbol:
TAC5412WQRTVRQ1 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: WQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
tac5412wqrtvrq1-etched.step/tac5412wqrtvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tac5412wqrtvrq1.step/tac5412wqrtvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (244 pp, sha256
a786c6566a98942f, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).