main
History Download
Ray Publish 0.1.0 ce97703

SY89854UMG

Microchip Tech · Clock Buffers, Drivers · VQFN-16-EP(3x3)

SY89854UMG from Microchip Tech, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Non-inverting differential input accepting AC- or DC-coupled signals as small as 100mV (200mVpp), internally terminated to VT through 50Ω, and indeterminate if left open.
2 VT passive Input termination center-tap where each side of the differential input pair terminates, providing a center-tap to a termination network for interface flexibility.
3 VREF-AC power_out Reference voltage output biased to VCC-1.2V for AC-coupling the inputs, connected to VT, bypassed with 0.01µF to VCC, with 1.5mA maximum sink/source capability.
4 /IN input Inverting differential input accepting AC- or DC-coupled signals as small as 100mV (200mVpp), internally terminated to VT through 50Ω, and indeterminate if left open.
5 GND power_in Ground, which must be connected to the same ground plane as the exposed pad.
6 /Q3 output Inverting differential 100K LVPECL output of channel 3, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter.
7 Q3 output Non-inverting differential 100K LVPECL output of channel 3, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter.
8 VCC power_in Positive power supply (2.5V ±5% or 3.3V ±10%), bypassed with 0.1µF
9 /Q2 output Inverting differential 100K LVPECL output of channel 2, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter.
10 Q2 output Non-inverting differential 100K LVPECL output of channel 2, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter.
11 /Q1 output Inverting differential 100K LVPECL output of channel 1, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter.
12 Q1 output Non-inverting differential 100K LVPECL output of channel 1, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter.
13 VCC power_in Positive power supply (2.5V ±5% or 3.3V ±10%), bypassed with 0.1µF
14 /Q0 output Inverting differential 100K LVPECL output of channel 0, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter.
15 Q0 output Non-inverting differential 100K LVPECL output of channel 0, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter.
16 GND power_in Ground, which must be connected to the same ground plane as the exposed pad.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package VQFN-16-EP(3x3)
Category RTC/Clock Chip
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply (2.5V) VCC 2.375 2.5 2.625 V 4
Power Supply (3.3V) VCC 3 3.3 3.6 V 4
Power Supply Current ICC 55 78 mA No load, max. VCC 4
Differential Input Resistance (IN, /IN) RDIFF_IN 90 100 110 Ω 4
Input Resistance (IN-to-VT) RIN 45 50 55 Ω 4
Input Low Voltage (IN, /IN) VIL 0 V max is VIH -0.1 (relative) 4
Input Voltage Swing (IN, /IN) VIN 0.1 1.7 V See Figure 1a. 4
Differential Input Voltage Swing (IN, /IN) VDIFF_IN 0.2 V See Figure 1b. 4
IN-to-VT VT_IN 1.28 V 4
Output Voltage Swing Q, /Q VOUT 550 800 mV See Figure 1a. 5
Differential Output Voltage Swing Q, /Q VDIFF-OUT 1100 1600 mV See Figure 1b. 5
Maximum Operating Frequency (Clock) fMAX 2 3.5 GHz Clock, VOUT ≥ 400mV 6
Maximum Operating Frequency (NRZ Data) fMAX 2.5 Gbps NRZ Data 6
Propagation Delay (IN-to-Q) tpd 140 220 340 ps VIN ≥ 100mVpk 6
Differential Propagation Delay Temperature Coefficient tpd Tempco 100 fs/°C 6
Output-to-Output Skew tSKEW 4 20 ps Note 9 6
Part-to-Part Skew tSKEW 150 ps Note 10 6
Random Jitter (RJ) tJitter 1 psRMS Note 11 6
Deterministic Jitter (DJ) tJitter 10 psPP Note 12 6
Cycle-to-Cycle Jitter tJitter 1 psRMS Note 13 6
Total Jitter tJitter 10 psPP Note 14 6
Output Rise/Fall Time (20% to 80%) tr, tf 50 100 180 ps At full output swing. 6
Supply Voltage (2.5V range) VCC 2.375 2.625 V 4
Supply Voltage (3.3V range) VCC 3 3.6 V 4
Ambient Temperature TA -40 85 °C 4
Supply Voltage VCC -0.5 4 V 4
Input Voltage VIN -0.5 V -0.5V to VCC 4
LVPECL Output Current, Continuous IOUT 50 mA Continuous 4
LVPECL Output Current, Surge IOUT 100 mA Surge 4
Termination Current (VT) -50 50 mA Source or sink current on VT 4
Input Current (IN, /IN) -50 50 mA Source or sink current on IN, /IN 4
VREF-AC Current -2 2 mA Source or sink current 4
Lead Temperature 260 °C soldering, 20sec. 4
Storage Temperature Ts -65 150 °C 4
Package Thermal Resistance Junction-to-Ambient θJA 60 °C/W QFN, Still-Air 4
Package Thermal Resistance Junction-to-Board ψJB 38 °C/W QFN, Junction-to-Board 4

CAD (KiCad official)

  • Symbol: SY89854UMG
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: sy89854umg-etched.step / sy89854umg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sy89854umg.step / sy89854umg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (13 pp, sha256 b9360b049a44ff0b, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF