3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSY89854UMG
Microchip Tech · Clock Buffers, Drivers · VQFN-16-EP(3x3)
SY89854UMG from Microchip Tech, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Non-inverting differential input accepting AC- or DC-coupled signals as small as 100mV (200mVpp), internally terminated to VT through 50Ω, and indeterminate if left open. |
| 2 | VT | passive | Input termination center-tap where each side of the differential input pair terminates, providing a center-tap to a termination network for interface flexibility. |
| 3 | VREF-AC | power_out | Reference voltage output biased to VCC-1.2V for AC-coupling the inputs, connected to VT, bypassed with 0.01µF to VCC, with 1.5mA maximum sink/source capability. |
| 4 | /IN | input | Inverting differential input accepting AC- or DC-coupled signals as small as 100mV (200mVpp), internally terminated to VT through 50Ω, and indeterminate if left open. |
| 5 | GND | power_in | Ground, which must be connected to the same ground plane as the exposed pad. |
| 6 | /Q3 | output | Inverting differential 100K LVPECL output of channel 3, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter. |
| 7 | Q3 | output | Non-inverting differential 100K LVPECL output of channel 3, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter. |
| 8 | VCC | power_in | Positive power supply (2.5V ±5% or 3.3V ±10%), bypassed with 0.1µF |
| 9 | /Q2 | output | Inverting differential 100K LVPECL output of channel 2, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter. |
| 10 | Q2 | output | Non-inverting differential 100K LVPECL output of channel 2, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter. |
| 11 | /Q1 | output | Inverting differential 100K LVPECL output of channel 1, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter. |
| 12 | Q1 | output | Non-inverting differential 100K LVPECL output of channel 1, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter. |
| 13 | VCC | power_in | Positive power supply (2.5V ±5% or 3.3V ±10%), bypassed with 0.1µF |
| 14 | /Q0 | output | Inverting differential 100K LVPECL output of channel 0, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter. |
| 15 | Q0 | output | Non-inverting differential 100K LVPECL output of channel 0, terminated with 50Ω to VCC-2V, and may be left floating if unused with no impact on jitter. |
| 16 | GND | power_in | Ground, which must be connected to the same ground plane as the exposed pad. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | VQFN-16-EP(3x3) |
| Category | RTC/Clock Chip |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply (2.5V) | VCC | 2.375 | 2.5 | 2.625 | V | 4 | |
| Power Supply (3.3V) | VCC | 3 | 3.3 | 3.6 | V | 4 | |
| Power Supply Current | ICC | 55 | 78 | mA | No load, max. VCC | 4 | |
| Differential Input Resistance (IN, /IN) | RDIFF_IN | 90 | 100 | 110 | Ω | 4 | |
| Input Resistance (IN-to-VT) | RIN | 45 | 50 | 55 | Ω | 4 | |
| Input Low Voltage (IN, /IN) | VIL | 0 | V | max is VIH -0.1 (relative) | 4 | ||
| Input Voltage Swing (IN, /IN) | VIN | 0.1 | 1.7 | V | See Figure 1a. | 4 | |
| Differential Input Voltage Swing (IN, /IN) | VDIFF_IN | 0.2 | V | See Figure 1b. | 4 | ||
| IN-to-VT | VT_IN | 1.28 | V | 4 | |||
| Output Voltage Swing Q, /Q | VOUT | 550 | 800 | mV | See Figure 1a. | 5 | |
| Differential Output Voltage Swing Q, /Q | VDIFF-OUT | 1100 | 1600 | mV | See Figure 1b. | 5 | |
| Maximum Operating Frequency (Clock) | fMAX | 2 | 3.5 | GHz | Clock, VOUT ≥ 400mV | 6 | |
| Maximum Operating Frequency (NRZ Data) | fMAX | 2.5 | Gbps | NRZ Data | 6 | ||
| Propagation Delay (IN-to-Q) | tpd | 140 | 220 | 340 | ps | VIN ≥ 100mVpk | 6 |
| Differential Propagation Delay Temperature Coefficient | tpd Tempco | 100 | fs/°C | 6 | |||
| Output-to-Output Skew | tSKEW | 4 | 20 | ps | Note 9 | 6 | |
| Part-to-Part Skew | tSKEW | 150 | ps | Note 10 | 6 | ||
| Random Jitter (RJ) | tJitter | 1 | psRMS | Note 11 | 6 | ||
| Deterministic Jitter (DJ) | tJitter | 10 | psPP | Note 12 | 6 | ||
| Cycle-to-Cycle Jitter | tJitter | 1 | psRMS | Note 13 | 6 | ||
| Total Jitter | tJitter | 10 | psPP | Note 14 | 6 | ||
| Output Rise/Fall Time (20% to 80%) | tr, tf | 50 | 100 | 180 | ps | At full output swing. | 6 |
| Supply Voltage (2.5V range) | VCC | 2.375 | 2.625 | V | 4 | ||
| Supply Voltage (3.3V range) | VCC | 3 | 3.6 | V | 4 | ||
| Ambient Temperature | TA | -40 | 85 | °C | 4 | ||
| Supply Voltage | VCC | -0.5 | 4 | V | 4 | ||
| Input Voltage | VIN | -0.5 | V | -0.5V to VCC | 4 | ||
| LVPECL Output Current, Continuous | IOUT | 50 | mA | Continuous | 4 | ||
| LVPECL Output Current, Surge | IOUT | 100 | mA | Surge | 4 | ||
| Termination Current (VT) | -50 | 50 | mA | Source or sink current on VT | 4 | ||
| Input Current (IN, /IN) | -50 | 50 | mA | Source or sink current on IN, /IN | 4 | ||
| VREF-AC Current | -2 | 2 | mA | Source or sink current | 4 | ||
| Lead Temperature | 260 | °C | soldering, 20sec. | 4 | |||
| Storage Temperature | Ts | -65 | 150 | °C | 4 | ||
| Package Thermal Resistance Junction-to-Ambient | θJA | 60 | °C/W | QFN, Still-Air | 4 | ||
| Package Thermal Resistance Junction-to-Board | ψJB | 38 | °C/W | QFN, Junction-to-Board | 4 |
CAD (KiCad official)
- Symbol:
SY89854UMG - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
sy89854umg-etched.step/sy89854umg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sy89854umg.step/sy89854umg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (13 pp, sha256
b9360b049a44ff0b, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).