main
Ray
Publish 0.1.0
7939ebd
SY7152AABC
Silergy Corp · DC-DC Converters · SOT-23-6
SY7152AABC from Silergy Corp, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Inductor node: connect an inductor between the IN pin and the LX pin, with LX rated up to 18V in the absolute maximum ratings. |
| 2 | GND | power_in | Ground pin; the layout guidance recommends maximizing the PCB copper area connected to GND for best thermal and noise performance. |
| 3 | FB | input | Feedback pin: VOUT = 0.6V x (R1/R2 + 1), with R1 connected between VOUT and FB and R2 between FB and GND; FB input current is 50 nA typical. |
| 4 | EN | input | Enable control: driving EN high (>1.5V) turns the part on and pulling it low (<0.4V) shuts it down, and it must not be left floating, with an absolute maximum rating of 18V. |
| 5 | IN | power_in | Input pin, decoupled to GND with a 1uF ceramic capacitor, with recommended input voltage supply of 3V to 8V and an absolute maximum rating of 18V. |
| 6 | NC | unconnected | No connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Silergy Corp |
| Package | SOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 3 | 8 | V | 3 | ||
| Switching Frequency | Fsw | 0.8 | 1 | 1.2 | MHz | 3 | |
| Feedback Reference Voltage | VREF | 0.588 | 0.6 | 0.612 | V | 3 | |
| EN Pin Input Current | IEN | 0 | 100 | nA | 3 | ||
| Max Duty Cycle | 90 | % | 3 | ||||
| LX, IN, EN voltage | 18 | V | 2 | ||||
| All other pins voltage | 3.6 | V | 2 | ||||
| Power Dissipation SOT23-6 | PD | 0.6 | W | TA = 25°C | 2 | ||
| Junction Temperature Range (absolute maximum) | 125 | °C | 2 | ||||
| Lead Temperature (Soldering) | 260 | °C | 10 sec. | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Input Voltage Supply | 3 | 8 | V | 2 | |||
| Junction Temperature Range (recommended) | -40 | 125 | °C | 2 | |||
| Ambient Temperature Range | -40 | 85 | °C | 2 | |||
| Package Thermal Resistance junction-to-ambient | θJA | 161 | °C/W | Natural convection, TA = 25°C, JEDEC 51-3 board | 2 | ||
| Package Thermal Resistance junction-to-case | θJC | 130 | °C/W | 2 | |||
| Quiescent Current | IQ | 100 | µA | VFB=0.66V | 3 | ||
| Shutdown Current | ISHDN | 15 | µA | EN=0 | 3 | ||
| Low Side Main FET On-Resistance | RON | 130 | mΩ | 3 | |||
| Main FET Current Limit | ILIM1 | 2 | A | 3 | |||
| FB pin input current | 50 | nA | 3 | ||||
| IN UVLO Rising Threshold | VIN,UVLO | 1.8 | V | 3 | |||
| UVLO Hysteresis | UVLO,HYS | 0.1 | V | 3 | |||
| Thermal Shutdown Temperature | TSD | 150 | °C | 3 | |||
| Thermal Shutdown Recovery Hysteresis | 15 | °C | 3 | ||||
| EN Rising Threshold | VENH | 1.5 | V | 3 | |||
| EN Falling Threshold | VENL | 0.4 | V | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 3) The PCB copper area associated with LX pin must | 8 |
CAD (KiCad official)
- Symbol:
SY7152AABC - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sy7152aabc-etched.step/sy7152aabc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sy7152aabc.step/sy7152aabc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Silergy Corp datasheet (10 pp, sha256
bece43fd90005cc7, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SY7152AABC
**Silergy Corp** · DC-DC Converters · SOT-23-6
SY7152AABC from Silergy Corp, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Inductor node: connect an inductor between the IN pin and the LX pin, with LX rated up to 18V in the absolute maximum ratings. |
| 2 | GND | power_in | Ground pin; the layout guidance recommends maximizing the PCB copper area connected to GND for best thermal and noise performance. |
| 3 | FB | input | Feedback pin: VOUT = 0.6V x (R1/R2 + 1), with R1 connected between VOUT and FB and R2 between FB and GND; FB input current is 50 nA typical. |
| 4 | EN | input | Enable control: driving EN high (>1.5V) turns the part on and pulling it low (<0.4V) shuts it down, and it must not be left floating, with an absolute maximum rating of 18V. |
| 5 | IN | power_in | Input pin, decoupled to GND with a 1uF ceramic capacitor, with recommended input voltage supply of 3V to 8V and an absolute maximum rating of 18V. |
| 6 | NC | unconnected | No connection. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Silergy Corp |
| Package | SOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 3 | | 8 | V | | 3 |
| Switching Frequency | Fsw | 0.8 | 1 | 1.2 | MHz | | 3 |
| Feedback Reference Voltage | VREF | 0.588 | 0.6 | 0.612 | V | | 3 |
| EN Pin Input Current | IEN | 0 | | 100 | nA | | 3 |
| Max Duty Cycle | | | | 90 | % | | 3 |
| LX, IN, EN voltage | | | | 18 | V | | 2 |
| All other pins voltage | | | | 3.6 | V | | 2 |
| Power Dissipation SOT23-6 | PD | | | 0.6 | W | TA = 25°C | 2 |
| Junction Temperature Range (absolute maximum) | | | | 125 | °C | | 2 |
| Lead Temperature (Soldering) | | | | 260 | °C | 10 sec. | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Input Voltage Supply | | 3 | | 8 | V | | 2 |
| Junction Temperature Range (recommended) | | -40 | | 125 | °C | | 2 |
| Ambient Temperature Range | | -40 | | 85 | °C | | 2 |
| Package Thermal Resistance junction-to-ambient | θJA | | | 161 | °C/W | Natural convection, TA = 25°C, JEDEC 51-3 board | 2 |
| Package Thermal Resistance junction-to-case | θJC | | | 130 | °C/W | | 2 |
| Quiescent Current | IQ | | 100 | | µA | VFB=0.66V | 3 |
| Shutdown Current | ISHDN | | 15 | | µA | EN=0 | 3 |
| Low Side Main FET On-Resistance | RON | | 130 | | mΩ | | 3 |
| Main FET Current Limit | ILIM1 | | 2 | | A | | 3 |
| FB pin input current | | | 50 | | nA | | 3 |
| IN UVLO Rising Threshold | VIN,UVLO | | 1.8 | | V | | 3 |
| UVLO Hysteresis | UVLO,HYS | | 0.1 | | V | | 3 |
| Thermal Shutdown Temperature | TSD | | 150 | | °C | | 3 |
| Thermal Shutdown Recovery Hysteresis | | | 15 | | °C | | 3 |
| EN Rising Threshold | VENH | | 1.5 | | V | | 3 |
| EN Falling Threshold | VENL | | 0.4 | | V | | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | 3) The PCB copper area associated with LX pin must | 8 |
## CAD (KiCad official)
- Symbol: `SY7152AABC`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `sy7152aabc-etched.step` / `sy7152aabc-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sy7152aabc.step` / `sy7152aabc.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Silergy Corp datasheet](docs/sy7152aabc-datasheet.pdf) (10 pp, sha256 `bece43fd90005cc7`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sy7152aabc-datasheet.pdf)