Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SY7152AABC

Silergy Corp · DC-DC Converters · SOT-23-6

SY7152AABC from Silergy Corp, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LX output Inductor node: connect an inductor between the IN pin and the LX pin, with LX rated up to 18V in the absolute maximum ratings.
2 GND power_in Ground pin; the layout guidance recommends maximizing the PCB copper area connected to GND for best thermal and noise performance.
3 FB input Feedback pin: VOUT = 0.6V x (R1/R2 + 1), with R1 connected between VOUT and FB and R2 between FB and GND; FB input current is 50 nA typical.
4 EN input Enable control: driving EN high (>1.5V) turns the part on and pulling it low (<0.4V) shuts it down, and it must not be left floating, with an absolute maximum rating of 18V.
5 IN power_in Input pin, decoupled to GND with a 1uF ceramic capacitor, with recommended input voltage supply of 3V to 8V and an absolute maximum rating of 18V.
6 NC unconnected No connection.

Key specifications

Parameter Value
Manufacturer Silergy Corp
Package SOT-23-6
Category Power Management ICs
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VIN 3 8 V 3
Switching Frequency Fsw 0.8 1 1.2 MHz 3
Feedback Reference Voltage VREF 0.588 0.6 0.612 V 3
EN Pin Input Current IEN 0 100 nA 3
Max Duty Cycle 90 % 3
LX, IN, EN voltage 18 V 2
All other pins voltage 3.6 V 2
Power Dissipation SOT23-6 PD 0.6 W TA = 25°C 2
Junction Temperature Range (absolute maximum) 125 °C 2
Lead Temperature (Soldering) 260 °C 10 sec. 2
Storage Temperature Range -65 150 °C 2
Input Voltage Supply 3 8 V 2
Junction Temperature Range (recommended) -40 125 °C 2
Ambient Temperature Range -40 85 °C 2
Package Thermal Resistance junction-to-ambient θJA 161 °C/W Natural convection, TA = 25°C, JEDEC 51-3 board 2
Package Thermal Resistance junction-to-case θJC 130 °C/W 2
Quiescent Current IQ 100 µA VFB=0.66V 3
Shutdown Current ISHDN 15 µA EN=0 3
Low Side Main FET On-Resistance RON 130 mΩ 3
Main FET Current Limit ILIM1 2 A 3
FB pin input current 50 nA 3
IN UVLO Rising Threshold VIN,UVLO 1.8 V 3
UVLO Hysteresis UVLO,HYS 0.1 V 3
Thermal Shutdown Temperature TSD 150 °C 3
Thermal Shutdown Recovery Hysteresis 15 °C 3
EN Rising Threshold VENH 1.5 V 3
EN Falling Threshold VENL 0.4 V 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 3) The PCB copper area associated with LX pin must 8

CAD (KiCad official)

  • Symbol: SY7152AABC
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: sy7152aabc-etched.step / sy7152aabc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sy7152aabc.step / sy7152aabc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Silergy Corp datasheet (10 pp, sha256 bece43fd90005cc7, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF