main
Ray stusb1600aqtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) e598b42
{
  "schema_version": 1,
  "type": "component",
  "slug": "stusb1600aqtr",
  "title": "STUSB1600AQTR",
  "brief": "STMicroelectronics Power Distribution Switches, QFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "stusb1600aqtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "STUSB1600AQTR",
    "manufacturer": "STMicroelectronics",
    "package": "QFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918405088468992",
    "parts": {
      "symbol": "stusb1600aqtr.kicad_sym",
      "footprint": "stusb1600aqtr.kicad_mod",
      "model_3d": "stusb1600aqtr-etched.glb",
      "model_3d_plain": "stusb1600aqtr.glb",
      "model_3d_step": "stusb1600aqtr-etched.step",
      "model_3d_step_plain": "stusb1600aqtr.step",
      "lbr": "stusb1600aqtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2156023",
      "digikey": "497-17647-2-ND",
      "mouser": "511-STUSB1600AQTR"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T10:58:51Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-17647-2-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "511-STUSB1600AQTR",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CC1DB",
        "type": "input",
        "description": "Dead-battery enable pull-down on CC1 pin, connect to CC1 or ground for dead-battery mode support (0 to 5.5 V operating)"
      },
      {
        "number": "2",
        "name": "CC1",
        "type": "bidirectional",
        "description": "Type-C configuration channel 1 for attach detection, plug orientation, and system configuration with high voltage protection up to 22 V (0 to 5.5 V operating)"
      },
      {
        "number": "3",
        "name": "VCONN",
        "type": "power_in",
        "description": "Power input for active cable with integrated current-limited high-side power switches; 350 mA default, programmable 100-600 mA by 50 mA steps (2.7 to 5.5 V)"
      },
      {
        "number": "4",
        "name": "CC2",
        "type": "bidirectional",
        "description": "Type-C configuration channel 2 for attach detection, plug orientation, and system configuration with high voltage protection up to 22 V (0 to 5.5 V operating)"
      },
      {
        "number": "5",
        "name": "CC2DB",
        "type": "input",
        "description": "Dead-battery enable pull-down on CC2 pin, connect to CC2 or ground for dead-battery mode support (0 to 5.5 V operating)"
      },
      {
        "number": "6",
        "name": "RESET",
        "type": "input",
        "description": "Active high reset input to initialize device logic and Type-C FSM (0 to 4.5 V operating)"
      },
      {
        "number": "7",
        "name": "SCL",
        "type": "input",
        "description": "I²C clock input requiring external pull-up resistor; up to 400 kHz fast mode (0 to 4.5 V operating)"
      },
      {
        "number": "8",
        "name": "SDA",
        "type": "tri_state",
        "description": "I²C open-drain data input/output, active low with external pull-up resistor required; up to 400 kHz fast mode (0 to 4.5 V operating)"
      },
      {
        "number": "9",
        "name": "ALERT#",
        "type": "tri_state",
        "description": "I²C interrupt, open-drain output active low indicating status changes in monitored registers with external pull-up required (0 to 4.5 V operating)"
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0 V)"
      },
      {
        "number": "11",
        "name": "VBUS_VALID",
        "type": "tri_state",
        "description": "VBUS detection open-drain output, active low when VBUS voltage is within valid operating range; external pull-up required (0 to 4.5 V operating)"
      },
      {
        "number": "12",
        "name": "ATTACH",
        "type": "tri_state",
        "description": "Attachment detection open-drain output, active low when valid source-to-sink connection is established or accessory detected; external pull-up required (0 to 4.5 V operating)"
      },
      {
        "number": "13",
        "name": "ADDR0",
        "type": "input",
        "description": "I²C device address selection input bit; low selects address 0x28, high selects address 0x29 for two-device configurations (0 to 4.5 V operating)"
      },
      {
        "number": "14",
        "name": "DEBUG1",
        "type": "tri_state",
        "description": "Debug accessory detection in sink power role, open-drain output active low asserted when in DebugAccessory.SNK state; external pull-up required (0 to 4.5 V operating)"
      },
      {
        "number": "15",
        "name": "DEBUG2",
        "type": "tri_state",
        "description": "Debug accessory detection in source power role, open-drain output active low asserted in UnorientedDebugAccessory.SRC or OrientedDebugAccessory.SRC states; external pull-up required (0 to 4.5 V operating)"
      },
      {
        "number": "16",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; reserved floating pin"
      },
      {
        "number": "17",
        "name": "A_B_SIDE",
        "type": "tri_state",
        "description": "Cable orientation open-drain output for USB SuperSpeed mux control: HiZ indicates CC1 attached, 0 indicates CC2 attached; external pull-up required (0 to 4.5 V operating)"
      },
      {
        "number": "18",
        "name": "VBUS_SENSE",
        "type": "input",
        "description": "High voltage analog input for VBUS voltage monitoring, discharge path control, and attachment detection in valid voltage range (0 to 22 V operating, 28 V absolute maximum)"
      },
      {
        "number": "19",
        "name": "VBUS_EN_SNK",
        "type": "tri_state",
        "description": "VBUS sink power path enable, open-drain output active low to drive external PMOS when connection established and VBUS valid (0 to 22 V operating, 28 V absolute maximum)"
      },
      {
        "number": "20",
        "name": "VBUS_EN_SRC",
        "type": "tri_state",
        "description": "VBUS source power path enable, open-drain output active low to drive external PMOS when connection established and VBUS valid (0 to 22 V operating, 28 V absolute maximum)"
      },
      {
        "number": "21",
        "name": "VREG_1V2",
        "type": "power_out",
        "description": "1.2 V internal regulator output; requires 1 µF typical decoupling capacitor (0.5 µF minimum, 10 µF maximum)"
      },
      {
        "number": "22",
        "name": "VSYS",
        "type": "power_in",
        "description": "Low power system supply input from battery or system power supply (3.0 to 5.5 V); connect to ground if not used"
      },
      {
        "number": "23",
        "name": "VREG_2V7",
        "type": "power_out",
        "description": "2.7 V internal regulator output; requires 1 µF typical decoupling capacitor (0.5 µF minimum, 10 µF maximum)"
      },
      {
        "number": "24",
        "name": "VDD",
        "type": "power_in",
        "description": "Main power supply from USB VBUS for high voltage domain; supports 4.1 to 22 V operating range with 28 V absolute maximum"
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 25 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 66,
        "cost_usd": 0.4679,
        "at": "2026-09-27T10:58:33"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918405088468992",
        "pages": 66,
        "sha256": "9211c19349c2e890",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stusb1600aqtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "stusb1600aqtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "a1fbf38b8139ef30f54319c2a01d39e536a7ad0484e961c5c3dba9457b15f803",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "STMicroelectronics",
      "Package": "QFN-24-EP(4x4)",
      "Category": "Power Management (PMIC)",
      "Pins": "25"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "stusb1600aqtr"
  ],
  "discovery_pitch": "STUSB1600AQTR (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stusb1600aqtr.kicad_sym",
    "stusb1600aqtr.kicad_mod",
    "stusb1600aqtr.glb",
    "stusb1600aqtr.step",
    "stusb1600aqtr.lbr",
    "docs/hero.png",
    "docs/stusb1600aqtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}