← Commit history

stusb1600aqtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·e598b4280b · ·parent f4a0441
2 files changed +90−10
package.json+48−8
@@ -105,19 +105,19 @@         "number": "7",         "name": "SCL",         "type": "input",-        "description": "I\u00b2C clock input requiring external pull-up resistor; up to 400 kHz fast mode (0 to 4.5 V operating)"+        "description": "I²C clock input requiring external pull-up resistor; up to 400 kHz fast mode (0 to 4.5 V operating)"       },       {         "number": "8",         "name": "SDA",         "type": "tri_state",-        "description": "I\u00b2C open-drain data input/output, active low with external pull-up resistor required; up to 400 kHz fast mode (0 to 4.5 V operating)"+        "description": "I²C open-drain data input/output, active low with external pull-up resistor required; up to 400 kHz fast mode (0 to 4.5 V operating)"       },       {         "number": "9",         "name": "ALERT#",         "type": "tri_state",-        "description": "I\u00b2C interrupt, open-drain output active low indicating status changes in monitored registers with external pull-up required (0 to 4.5 V operating)"+        "description": "I²C interrupt, open-drain output active low indicating status changes in monitored registers with external pull-up required (0 to 4.5 V operating)"       },       {         "number": "10",@@ -141,7 +141,7 @@         "number": "13",         "name": "ADDR0",         "type": "input",-        "description": "I\u00b2C device address selection input bit; low selects address 0x28, high selects address 0x29 for two-device configurations (0 to 4.5 V operating)"+        "description": "I²C device address selection input bit; low selects address 0x28, high selects address 0x29 for two-device configurations (0 to 4.5 V operating)"       },       {         "number": "14",@@ -189,7 +189,7 @@         "number": "21",         "name": "VREG_1V2",         "type": "power_out",-        "description": "1.2 V internal regulator output; requires 1 \u00b5F typical decoupling capacitor (0.5 \u00b5F minimum, 10 \u00b5F maximum)"+        "description": "1.2 V internal regulator output; requires 1 µF typical decoupling capacitor (0.5 µF minimum, 10 µF maximum)"       },       {         "number": "22",@@ -201,7 +201,7 @@         "number": "23",         "name": "VREG_2V7",         "type": "power_out",-        "description": "2.7 V internal regulator output; requires 1 \u00b5F typical decoupling capacitor (0.5 \u00b5F minimum, 10 \u00b5F maximum)"+        "description": "2.7 V internal regulator output; requires 1 µF typical decoupling capacitor (0.5 µF minimum, 10 µF maximum)"       },       {         "number": "24",@@ -251,6 +251,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "stusb1600aqtr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "stusb1600aqtr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a1fbf38b8139ef30f54319c2a01d39e536a7ad0484e961c5c3dba9457b15f803",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -236,7 +236,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "stusb1600aqtr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "stusb1600aqtr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a1fbf38b8139ef30f54319c2a01d39e536a7ad0484e961c5c3dba9457b15f803",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -283,4 +323,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}