main
History Download
Ray Initial commit: component/stspin233 0536ba6

STSPIN233

STMicroelectronics · Gate Drivers · QFN-16-EP(3x3)

STSPIN233 from STMicroelectronics, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INU input Logic input driving the U half-bridge output state (5V max logic input, VIH min 1.6V / VIL max 0.6V per Table 5).
2 ENU input Logic input enabling the U half-bridge output; when low the U output is forced high impedance (per Table 8 truth table).
3 OUTU output Power bridge output U, driving the motor phase U with continuous output current rating up to 1.3 Arms.
4 SENSEU passive Sense output of bridge U for three-shunt current sensing; sense pin voltage range is -1 V to 1 V per absolute maximum ratings.
5 VS power_in Device supply voltage input; recommended operating range 1.8 V to 10 V (absolute maximum -0.3 V to 11 V).
6 GND power_in Device ground reference pin.
7 OUTV output Power bridge output V, driving the motor phase V with continuous output current rating up to 1.3 Arms.
8 SENSEV passive Sense output of bridge V for three-shunt current sensing; sense pin voltage range is -1 V to 1 V per absolute maximum ratings.
9 SENSEW passive Sense output of bridge W for three-shunt current sensing; sense pin voltage range is -1 V to 1 V per absolute maximum ratings.
10 OUTW output Power bridge output W, driving the motor phase W with continuous output current rating up to 1.3 Arms.
11 INW input Logic input driving the W half-bridge output state.
12 ENW input Logic input enabling the W half-bridge output; when low the W output is forced high impedance.
13 EN\FAULT bidirectional 5V-compliant logic input and open-drain output; when driven low it disables the power stage, and it is internally forced low through an open-drain MOSFET when an overcurrent, short-circuit, or thermal-shutdown fault occurs.
14 STBY\RESET input 5V-compliant logic input; forcing it below VSTBYL (max 0.9 V) places the device in low-consumption standby mode, cutting supply to control circuitry, while VSTBYH (min 1.48 V) exits standby.
15 INV input Logic input driving the V half-bridge output state.
16 ENV input Logic input enabling the V half-bridge output; when low the V output is forced high impedance.
17 EPAD power_in Exposed pad on the package underside; per the pin connection note it must be connected to ground for proper thermal and electrical operation.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package QFN-16-EP(3x3)
Category Motor Driver ICs
Pins 17

CAD (KiCad official)

  • Symbol: STSPIN233
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: stspin233-etched.step / stspin233-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stspin233.step / stspin233.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (22 pp, sha256 cb2b256b8aecd894, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF