component
STSPIN233
Public Made by Adomby adom
STMicroelectronics Gate Drivers, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# STSPIN233++**STMicroelectronics** · Gate Drivers · QFN-16-EP(3x3)++STSPIN233 from STMicroelectronics, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | INU | input | Logic input driving the U half-bridge output state (5V max logic input, VIH min 1.6V / VIL max 0.6V per Table 5). |+| 2 | ENU | input | Logic input enabling the U half-bridge output; when low the U output is forced high impedance (per Table 8 truth table). |+| 3 | OUTU | output | Power bridge output U, driving the motor phase U with continuous output current rating up to 1.3 Arms. |+| 4 | SENSEU | passive | Sense output of bridge U for three-shunt current sensing; sense pin voltage range is -1 V to 1 V per absolute maximum ratings. |+| 5 | VS | power_in | Device supply voltage input; recommended operating range 1.8 V to 10 V (absolute maximum -0.3 V to 11 V). |+| 6 | GND | power_in | Device ground reference pin. |+| 7 | OUTV | output | Power bridge output V, driving the motor phase V with continuous output current rating up to 1.3 Arms. |+| 8 | SENSEV | passive | Sense output of bridge V for three-shunt current sensing; sense pin voltage range is -1 V to 1 V per absolute maximum ratings. |+| 9 | SENSEW | passive | Sense output of bridge W for three-shunt current sensing; sense pin voltage range is -1 V to 1 V per absolute maximum ratings. |+| 10 | OUTW | output | Power bridge output W, driving the motor phase W with continuous output current rating up to 1.3 Arms. |+| 11 | INW | input | Logic input driving the W half-bridge output state. |+| 12 | ENW | input | Logic input enabling the W half-bridge output; when low the W output is forced high impedance. |+| 13 | EN\FAULT | bidirectional | 5V-compliant logic input and open-drain output; when driven low it disables the power stage, and it is internally forced low through an open-drain MOSFET when an overcurrent, short-circuit, or thermal-shutdown fault occurs. |+| 14 | STBY\RESET | input | 5V-compliant logic input; forcing it below VSTBYL (max 0.9 V) places the device in low-consumption standby mode, cutting supply to control circuitry, while VSTBYH (min 1.48 V) exits standby. |+| 15 | INV | input | Logic input driving the V half-bridge output state. |+| 16 | ENV | input | Logic input enabling the V half-bridge output; when low the V output is forced high impedance. |+| 17 | EPAD | power_in | Exposed pad on the package underside; per the pin connection note it must be connected to ground for proper thermal and electrical operation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | QFN-16-EP(3x3) |+| Category | Motor Driver ICs |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `STSPIN233`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `stspin233-etched.step` / `stspin233-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stspin233.step` / `stspin233.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stspin233.pdf) (22 pp, sha256 `cb2b256b8aecd894`, retrieved 2026-09-23, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stspin233-datasheet.pdf)
page.jsonadded+197@@ -0,0 +1,197 @@+{+ "slug": "stspin233",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Gate Drivers, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "stspin233",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stspin233.kicad_sym",+ "stspin233.kicad_mod",+ "stspin233.glb",+ "stspin233.step",+ "stspin233.lbr",+ "docs/hero.png",+ "docs/stspin233-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STSPIN233",+ "manufacturer": "STMicroelectronics",+ "package": "QFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "Motor Driver ICs",+ "subcategory": "Gate Drivers",+ "datasheet": "https://www.st.com/resource/en/datasheet/stspin233.pdf",+ "parts": {+ "symbol": "stspin233.kicad_sym",+ "footprint": "stspin233.kicad_mod",+ "model_3d": "stspin233-etched.glb",+ "model_3d_plain": "stspin233.glb",+ "model_3d_step": "stspin233-etched.step",+ "model_3d_step_plain": "stspin233.step",+ "lbr": "stspin233.lbr"+ },+ "distributor_links": {+ "lcsc": "C2653468"+ },+ "pins": [+ {+ "number": "1",+ "name": "INU",+ "type": "input",+ "description": "Logic input driving the U half-bridge output state (5V max logic input, VIH min 1.6V / VIL max 0.6V per Table 5)."+ },+ {+ "number": "2",+ "name": "ENU",+ "type": "input",+ "description": "Logic input enabling the U half-bridge output; when low the U output is forced high impedance (per Table 8 truth table)."+ },+ {+ "number": "3",+ "name": "OUTU",+ "type": "output",+ "description": "Power bridge output U, driving the motor phase U with continuous output current rating up to 1.3 Arms."+ },+ {+ "number": "4",+ "name": "SENSEU",+ "type": "passive",+ "description": "Sense output of bridge U for three-shunt current sensing; sense pin voltage range is -1 V to 1 V per absolute maximum ratings."+ },+ {+ "number": "5",+ "name": "VS",+ "type": "power_in",+ "description": "Device supply voltage input; recommended operating range 1.8 V to 10 V (absolute maximum -0.3 V to 11 V)."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference pin."+ },+ {+ "number": "7",+ "name": "OUTV",+ "type": "output",+ "description": "Power bridge output V, driving the motor phase V with continuous output current rating up to 1.3 Arms."+ },+ {+ "number": "8",+ "name": "SENSEV",+ "type": "passive",+ "description": "Sense output of bridge V for three-shunt current sensing; sense pin voltage range is -1 V to 1 V per absolute maximum ratings."+ },+ {+ "number": "9",+ "name": "SENSEW",+ "type": "passive",+ "description": "Sense output of bridge W for three-shunt current sensing; sense pin voltage range is -1 V to 1 V per absolute maximum ratings."+ },+ {+ "number": "10",+ "name": "OUTW",+ "type": "output",+ "description": "Power bridge output W, driving the motor phase W with continuous output current rating up to 1.3 Arms."+ },+ {+ "number": "11",+ "name": "INW",+ "type": "input",+ "description": "Logic input driving the W half-bridge output state."+ },+ {+ "number": "12",+ "name": "ENW",+ "type": "input",+ "description": "Logic input enabling the W half-bridge output; when low the W output is forced high impedance."+ },+ {+ "number": "13",+ "name": "EN\\FAULT",+ "type": "bidirectional",+ "description": "5V-compliant logic input and open-drain output; when driven low it disables the power stage, and it is internally forced low through an open-drain MOSFET when an overcurrent, short-circuit, or thermal-shutdown fault occurs."+ },+ {+ "number": "14",+ "name": "STBY\\RESET",+ "type": "input",+ "description": "5V-compliant logic input; forcing it below VSTBYL (max 0.9 V) places the device in low-consumption standby mode, cutting supply to control circuitry, while VSTBYH (min 1.48 V) exits standby."+ },+ {+ "number": "15",+ "name": "INV",+ "type": "input",+ "description": "Logic input driving the V half-bridge output state."+ },+ {+ "number": "16",+ "name": "ENV",+ "type": "input",+ "description": "Logic input enabling the V half-bridge output; when low the V output is forced high impedance."+ },+ {+ "number": "17",+ "name": "EPAD",+ "type": "power_in",+ "description": "Exposed pad on the package underside; per the pin connection note it must be connected to ground for proper thermal and electrical operation."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 17 added from the footprint"+ ],+ "pages_sent": 22,+ "cost_usd": 0.2146,+ "at": "2026-09-23T04:58:55"+ },+ "datasheet": {+ "url": "https://www.st.com/resource/en/datasheet/stspin233.pdf",+ "pages": 22,+ "sha256": "cb2b256b8aecd894",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}