main
History Download
Ray Publish 0.1.0 715b230

STM8S207R6T6

STMicroelectronics · ST Microelectronics · LQFP-64(10x10)

STM8S207R6T6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NRST bidirectional Reset pin (NRST) of the device; its electrical characteristics are specified in section 10.3.7 (Reset pin characteristics).
2 PA1/OSCIN bidirectional Port A1 I/O that doubles as the resonator/crystal input OSCIN, with slow output speed O1 (up to 2 MHz).
3 PA2/OSCOUT bidirectional Port A2 I/O that doubles as the resonator/crystal output OSCOUT, with slow output speed O1 (up to 2 MHz).
4 VSSIO_1 power_in I/O ground for the first I/O group.
5 VSS power_in Digital ground.
6 VCAP power_out 1.8 V regulator capacitor pin; external capacitor requirements are given in section 10.3.1 (VCAP external capacitor).
7 VDD power_in Digital power supply, operating from 2.95 V to 5.5 V.
8 VDDIO_1 power_in I/O power supply for the first I/O group.
9 PA3/TIM2_CH3 bidirectional Port A3 I/O with default alternate function TIM2 channel 3, remappable to TIM3_CH1 through option AFR1, and slow output speed O1.
10 PA4/UART1_RX bidirectional Port A4 high-sink I/O (HS) with UART1 receive as its alternate function; its default state is controlled by the ROM bootloader.
11 PA5/UART1_TX bidirectional Port A5 high-sink I/O (HS) with UART1 transmit as its alternate function.
12 PA6/UART1_CK bidirectional Port A6 high-sink I/O (HS) with UART1 synchronous clock as its alternate function.
13 PF7/AIN15 bidirectional Port F7 I/O with analog input 15 (AIN15) and slow output speed O1.
14 PF6/AIN14 bidirectional Port F6 I/O with analog input 14 (AIN14) and slow output speed O1.
15 PF5/AIN13 bidirectional Port F5 I/O with analog input 13 (AIN13) and slow output speed O1.
16 PF4/AIN12 bidirectional Port F4 I/O with analog input 12 (AIN12) and slow output speed O1.
17 PF3/AIN11 bidirectional Port F3 I/O with analog input 11 (AIN11) and slow output speed O1.
18 VREF+ power_in ADC positive reference voltage.
19 VDDA power_in Analog power supply.
20 VSSA power_in Analog ground.
21 VREF- power_in ADC negative reference voltage.
22 PF0/AIN10 bidirectional Port F0 I/O with analog input 10 (AIN10) and slow output speed O1.
23 PB7/AIN7 bidirectional Port B7 I/O with analog input 7 (AIN7) and slow output speed O1.
24 PB6/AIN6 bidirectional Port B6 I/O with analog input 6 (AIN6) and slow output speed O1.
25 PB5/AIN5 bidirectional Port B5 I/O with analog input 5 (AIN5); I2C_SDA is available through remap option AFR6.
26 PB4/AIN4 bidirectional Port B4 I/O with analog input 4 (AIN4); I2C_SCL is available through remap option AFR6.
27 PB3/AIN3 bidirectional Port B3 I/O with analog input 3 (AIN3); TIM1_ETR is available through remap option AFR5.
28 PB2/AIN2 bidirectional Port B2 I/O with analog input 2 (AIN2); TIM1_CH3N is available through remap option AFR5.
29 PB1/AIN1 bidirectional Port B1 I/O with analog input 1 (AIN1); TIM1_CH2N is available through remap option AFR5.
30 PB0/AIN0 bidirectional Port B0 I/O with analog input 0 (AIN0); TIM1_CH1N is available through remap option AFR5.
31 PE7/AIN8 bidirectional Port E7 I/O with analog input 8 (AIN8) and slow output speed O1.
32 PE6/AIN9 bidirectional Port E6 I/O with analog input 9 (AIN9) and slow output speed O1.
33 PE5/SPI_NSS bidirectional Port E5 I/O with SPI master/slave select (SPI_NSS) as its alternate function.
34 PC1/TIM1_CH1 bidirectional Port C1 high-sink I/O (HS) with Timer 1 channel 1 (TIM1_CH1) as its alternate function.
35 PC2/TIM1_CH2 bidirectional Port C2 high-sink I/O (HS) with Timer 1 channel 2 (TIM1_CH2) as its alternate function.
36 PC3/TIM1_CH3 bidirectional Port C3 high-sink I/O (HS) with Timer 1 channel 3 (TIM1_CH3) as its alternate function.
37 PC4/TIM1_CH4 bidirectional Port C4 high-sink I/O (HS) with Timer 1 channel 4 (TIM1_CH4) as its alternate function.
38 PC5/SPI_SCK bidirectional Port C5 high-sink I/O (HS) with SPI clock (SPI_SCK) as its alternate function.
39 VSSIO_2 power_in I/O ground for the second I/O group.
40 VDDIO_2 power_in I/O power supply for the second I/O group.
41 PC6/SPI_MOSI bidirectional Port C6 high-sink I/O (HS) with SPI master out / slave in (SPI_MOSI) as its alternate function.
42 PC7/SPI_MISO bidirectional Port C7 high-sink I/O (HS) with SPI master in / slave out (SPI_MISO) as its alternate function.
43 PG0/CAN_TX bidirectional Port G0 I/O with beCAN transmit (CAN_TX) as its alternate function; the beCAN interface is available on STM8S208xx devices only.
44 PG1/CAN_RX bidirectional Port G1 I/O with beCAN receive (CAN_RX) as its alternate function; the beCAN interface is available on STM8S208xx devices only.
45 PG2 bidirectional Port G2 general-purpose I/O with slow output speed O1.
46 PG3 bidirectional Port G3 general-purpose I/O with slow output speed O1.
47 PG4 bidirectional Port G4 general-purpose I/O with slow output speed O1.
48 PI0 bidirectional Port I0 general-purpose I/O with slow output speed O1.
49 PG5 bidirectional Port G5 general-purpose I/O with slow output speed O1.
50 PG6 bidirectional Port G6 general-purpose I/O with slow output speed O1.
51 PG7 bidirectional Port G7 general-purpose I/O with slow output speed O1.
52 PE4 bidirectional Port E4 general-purpose I/O with slow output speed O1.
53 PE3/TIM1_BKIN bidirectional Port E3 I/O with Timer 1 break input (TIM1_BKIN) as its alternate function.
54 PE2/I2C_SDA bidirectional Port E2 true open-drain I/O (P-buffer and protection diode to VDD not implemented) carrying the I2C data line (I2C_SDA).
55 PE1/I2C_SCL bidirectional Port E1 true open-drain I/O (P-buffer and protection diode to VDD not implemented) carrying the I2C clock line (I2C_SCL).
56 PE0/CLK_CCO bidirectional Port E0 high-sink I/O (HS) with configurable clock output (CLK_CCO) as its alternate function.
57 PD0/TIM3_CH2 bidirectional Port D0 high-sink I/O (HS) with Timer 3 channel 2 (TIM3_CH2) as default alternate function; TIM1_BKIN and CLK_CCO are available through remap options.
58 PD1/SWIM bidirectional Port D1 high-sink I/O (HS) carrying the SWIM data interface; it is in input pull-up during the reset phase and after internal reset release.
59 PD2/TIM3_CH1 bidirectional Port D2 high-sink I/O (HS) with Timer 3 channel 1 (TIM3_CH1) as default alternate function; TIM2_CH3 is available through remap option AFR1.
60 PD3/TIM2_CH2 bidirectional Port D3 high-sink I/O (HS) with Timer 2 channel 2 (TIM2_CH2) as default alternate function; ADC_ETR is available through remap option AFR0.
61 PD4/TIM2_CH1/BEEP bidirectional Port D4 high-sink I/O (HS) with Timer 2 channel 1 (TIM2_CH1) as default alternate function; BEEP output is available through remap option AFR7.
62 PD5/UART3_TX bidirectional Port D5 I/O with UART3 data transmit (UART3_TX) as its alternate function and slow output speed O1.
63 PD6/UART3_RX bidirectional Port D6 I/O with UART3 data receive (UART3_RX) as its alternate function; its default state is controlled by the ROM bootloader and it returns to floating before bootloader exit.
64 PD7/TLI bidirectional Port D7 I/O with top level interrupt (TLI) as its alternate function and slow output speed O1; TIM1_CH4 is available through remap option AFR4 on the 44-pin package only.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (including VDDA and VDDIO) VDDx - VSS -0.3 6.5 V 54
Input voltage on true open drain pins (PE1, PE2) VIN -0.3 6.5 V min printed as VSS - 0.3 (VSS reference = 0 V) 54
Input voltage on any other pin VIN -0.3 V min printed as VSS - 0.3; max printed as VDD + 0.3 (not numeric) 54
Variations between different power pins /VDDx - VDD/ 50 mV 54
Variations between all the different ground pins /VSSx - VSS/ 50 mV 54
Total current into VDD power lines (source) IVDD 60 mA 55
Total current out of VSS ground lines (sink) IVSS 60 mA 55
Output current sunk by any I/O and control pin IIO 20 mA 55
Output current sourced by any I/O and control pin IIO 20 mA 55
Total output current sourced (all I/O and control pins), devices with two VDDIO pins IIO 200 mA devices with two VDDIO pins 55
Total output current sourced (all I/O and control pins), devices with one VDDIO pin IIO 100 mA devices with one VDDIO pin 55
Total output current sunk (all I/O and control pins), devices with two VSSIO pins IIO 160 mA devices with two VSSIO pins 55
Total output current sunk (all I/O and control pins), devices with one VSSIO pin IIO 80 mA devices with one VSSIO pin 55
Injected current on NRST pin IINJ(PIN) -4 4 mA 55
Injected current on OSCIN pin IINJ(PIN) -4 4 mA 55
Injected current on any other pin IINJ(PIN) -4 4 mA 55
Total injected current (sum of all I/O and control pins) IINJ(PIN) -20 20 mA 55
Storage temperature range TSTG -65 150 °C 55
Maximum junction temperature TJ 150 °C 55
Internal CPU clock frequency fCPU 0 24 MHz TA ≤ 105 °C 56
Internal CPU clock frequency fCPU 0 16 MHz 56
Standard operating voltage VDD/VDD_IO 2.95 5.5 V 56
CEXT: capacitance of external capacitor VCAP 470 3300 nF 56
ESR of external capacitor 0.3 Ω at 1 MHz 56
ESL of external capacitor 15 nH 56
Power dissipation PD 443 mW TA = 85 °C for suffix 6; 44, 48, 64 and 80-pin devices, 8 standard ports, 2 high sink and 2 open drain ports simultaneously 56
Ambient temperature for 6 suffix version (maximum power dissipation) TA -40 85 °C suffix 6 56
Junction temperature range, 6 suffix version TJ -40 105 °C suffix 6 56
Power-on reset threshold VIT+ 2.65 2.8 2.95 V 57
Brown-out reset threshold VIT- 2.58 2.73 2.88 V 57
Supply current in run mode, code executed from RAM IDD(RUN) 7.3 mA VDD = 5 V; fCPU = fMASTER = 24 MHz, TA ≤ 105 °C; HSE user ext. clock (24 MHz) 58
Supply current in run mode, code executed from RAM IDD(RUN) 5.8 mA VDD = 5 V; fCPU = fMASTER = 16 MHz; HSE user ext. clock (16 MHz) 58
Supply current in run mode, code executed from RAM IDD(RUN) 3.4 mA VDD = 5 V; fCPU = fMASTER = 16 MHz; HSI RC osc. (16 MHz) 58
Supply current in run mode, code executed from Flash IDD(RUN) 18 mA VDD = 5 V; fCPU = fMASTER = 24 MHz, TA ≤ 105 °C; HSE user ext. clock (24 MHz) 58
Supply current in run mode, code executed from Flash IDD(RUN) 15.2 mA VDD = 5 V; fCPU = fMASTER = 16 MHz; HSE user ext. clock (16 MHz) 58
Supply current in run mode, code executed from Flash IDD(RUN) 13.2 mA VDD = 5 V; fCPU = fMASTER = 16 MHz; HSI RC osc. (16 MHz) 58
Supply current in wait mode IDD(WFI) 4.7 mA VDD = 5 V; fCPU = fMASTER = 24 MHz, TA ≤ 105 °C; HSE user ext. clock (24 MHz) 60
Supply current in active halt mode, main voltage regulator on, Flash operating mode IDD(AH) 260 µA VDD = 5 V, TA -40 to 85 °C; MVR on; Flash operating mode; LSI RC oscillator (128 kHz) 61
Supply current in active halt mode, main voltage regulator off, Flash power-down mode IDD(AH) 45 µA VDD = 5 V, TA -40 to 85 °C; MVR off; Flash power-down mode 61
Supply current in halt mode, Flash power-down, HSI clock after wakeup IDD(H) 35 µA VDD = 5 V; max at 85 °C 62
Supply current in halt mode, Flash power-down, HSI clock after wakeup IDD(H) 100 µA VDD = 5 V; max at 125 °C 62
Operating voltage (all modes, execution/write/erase) VDD 2.95 5.5 V fCPU ≤ 24 MHz 69
Input low level voltage VIL -0.3 V VDD = 5 V; max printed as 0.3 x VDD (not numeric) 70
Pull-up resistor Rpu 30 55 80 kΩ VDD = 5 V, VIN = VSS 70
Rise and fall time (10% - 90%), fast I/Os tR, tF 20 ns Fast I/Os; load = 50 pF 70
Input leakage current, analog and digital Ilkg -1 1 µA VSS ≤ VIN ≤ VDD 70
Thermal resistance junction-ambient, LQFP 64 - 10 x 10 mm JA 46 °C/W JEDEC JESD51-2, 4-layer PCB, natural convection 108
Output low level with 8 pins sunk (standard ports) VOL 2 V IIO = 10 mA, VDD = 5 V 72
Output low level with 4 pins sunk (standard ports) VOL 1 V IIO = 4 mA, VDD = 3.3 V 72
Output high level with 8 pins sourced (standard ports) VOH 2.8 V IIO = 10 mA, VDD = 5 V 72
Output high level with 4 pins sourced (standard ports) VOH 2.1 V IIO = 4 mA, VDD = 3.3 V 72
Output low level with 2 pins sunk (true open drain ports) VOL 1 V IIO = 10 mA, VDD = 5 V 72
Output low level with 2 pins sunk (true open drain ports) VOL 1.5 V IIO = 10 mA, VDD = 3.3 V 72
Output low level with 2 pins sunk (true open drain ports) VOL 2 V IIO = 20 mA, VDD = 5 V 72
Output low level with 8 pins sunk (high sink ports) VOL 0.8 V IIO = 10 mA, VDD = 5 V 72
Output low level with 4 pins sunk (high sink ports) VOL 1 V IIO = 10 mA, VDD = 3.3 V 72
Output low level with 4 pins sunk (high sink ports) VOL 1.5 V IIO = 20 mA, VDD = 5 V 72
Output high level with 8 pins sourced (high sink ports) VOH 4 V IIO = 10 mA, VDD = 5 V 72
Output high level with 4 pins sourced (high sink ports) VOH 2.1 V IIO = 10 mA, VDD = 3.3 V 72
Output high level with 4 pins sourced (high sink ports) VOH 3.3 V IIO = 20 mA, VDD = 5 V 72

CAD (KiCad official)

  • Symbol: STM8S207R6T6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm8s207r6t6-etched.step / stm8s207r6t6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm8s207r6t6.step / stm8s207r6t6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (117 pp, sha256 7adeaa849cf9e22f, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF