component
STM8S207R6T6
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM8S207R6T6
STMicroelectronics · ST Microelectronics · LQFP-64(10x10)
STM8S207R6T6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NRST | bidirectional | Reset pin (NRST) of the device; its electrical characteristics are specified in section 10.3.7 (Reset pin characteristics). |
| 2 | PA1/OSCIN | bidirectional | Port A1 I/O that doubles as the resonator/crystal input OSCIN, with slow output speed O1 (up to 2 MHz). |
| 3 | PA2/OSCOUT | bidirectional | Port A2 I/O that doubles as the resonator/crystal output OSCOUT, with slow output speed O1 (up to 2 MHz). |
| 4 | VSSIO_1 | power_in | I/O ground for the first I/O group. |
| 5 | VSS | power_in | Digital ground. |
| 6 | VCAP | power_out | 1.8 V regulator capacitor pin; external capacitor requirements are given in section 10.3.1 (VCAP external capacitor). |
| 7 | VDD | power_in | Digital power supply, operating from 2.95 V to 5.5 V. |
| 8 | VDDIO_1 | power_in | I/O power supply for the first I/O group. |
| 9 | PA3/TIM2_CH3 | bidirectional | Port A3 I/O with default alternate function TIM2 channel 3, remappable to TIM3_CH1 through option AFR1, and slow output speed O1. |
| 10 | PA4/UART1_RX | bidirectional | Port A4 high-sink I/O (HS) with UART1 receive as its alternate function; its default state is controlled by the ROM bootloader. |
| 11 | PA5/UART1_TX | bidirectional | Port A5 high-sink I/O (HS) with UART1 transmit as its alternate function. |
| 12 | PA6/UART1_CK | bidirectional | Port A6 high-sink I/O (HS) with UART1 synchronous clock as its alternate function. |
| 13 | PF7/AIN15 | bidirectional | Port F7 I/O with analog input 15 (AIN15) and slow output speed O1. |
| 14 | PF6/AIN14 | bidirectional | Port F6 I/O with analog input 14 (AIN14) and slow output speed O1. |
| 15 | PF5/AIN13 | bidirectional | Port F5 I/O with analog input 13 (AIN13) and slow output speed O1. |
| 16 | PF4/AIN12 | bidirectional | Port F4 I/O with analog input 12 (AIN12) and slow output speed O1. |
| 17 | PF3/AIN11 | bidirectional | Port F3 I/O with analog input 11 (AIN11) and slow output speed O1. |
| 18 | VREF+ | power_in | ADC positive reference voltage. |
| 19 | VDDA | power_in | Analog power supply. |
| 20 | VSSA | power_in | Analog ground. |
| 21 | VREF- | power_in | ADC negative reference voltage. |
| 22 | PF0/AIN10 | bidirectional | Port F0 I/O with analog input 10 (AIN10) and slow output speed O1. |
| 23 | PB7/AIN7 | bidirectional | Port B7 I/O with analog input 7 (AIN7) and slow output speed O1. |
| 24 | PB6/AIN6 | bidirectional | Port B6 I/O with analog input 6 (AIN6) and slow output speed O1. |
| 25 | PB5/AIN5 | bidirectional | Port B5 I/O with analog input 5 (AIN5); I2C_SDA is available through remap option AFR6. |
| 26 | PB4/AIN4 | bidirectional | Port B4 I/O with analog input 4 (AIN4); I2C_SCL is available through remap option AFR6. |
| 27 | PB3/AIN3 | bidirectional | Port B3 I/O with analog input 3 (AIN3); TIM1_ETR is available through remap option AFR5. |
| 28 | PB2/AIN2 | bidirectional | Port B2 I/O with analog input 2 (AIN2); TIM1_CH3N is available through remap option AFR5. |
| 29 | PB1/AIN1 | bidirectional | Port B1 I/O with analog input 1 (AIN1); TIM1_CH2N is available through remap option AFR5. |
| 30 | PB0/AIN0 | bidirectional | Port B0 I/O with analog input 0 (AIN0); TIM1_CH1N is available through remap option AFR5. |
| 31 | PE7/AIN8 | bidirectional | Port E7 I/O with analog input 8 (AIN8) and slow output speed O1. |
| 32 | PE6/AIN9 | bidirectional | Port E6 I/O with analog input 9 (AIN9) and slow output speed O1. |
| 33 | PE5/SPI_NSS | bidirectional | Port E5 I/O with SPI master/slave select (SPI_NSS) as its alternate function. |
| 34 | PC1/TIM1_CH1 | bidirectional | Port C1 high-sink I/O (HS) with Timer 1 channel 1 (TIM1_CH1) as its alternate function. |
| 35 | PC2/TIM1_CH2 | bidirectional | Port C2 high-sink I/O (HS) with Timer 1 channel 2 (TIM1_CH2) as its alternate function. |
| 36 | PC3/TIM1_CH3 | bidirectional | Port C3 high-sink I/O (HS) with Timer 1 channel 3 (TIM1_CH3) as its alternate function. |
| 37 | PC4/TIM1_CH4 | bidirectional | Port C4 high-sink I/O (HS) with Timer 1 channel 4 (TIM1_CH4) as its alternate function. |
| 38 | PC5/SPI_SCK | bidirectional | Port C5 high-sink I/O (HS) with SPI clock (SPI_SCK) as its alternate function. |
| 39 | VSSIO_2 | power_in | I/O ground for the second I/O group. |
| 40 | VDDIO_2 | power_in | I/O power supply for the second I/O group. |
| 41 | PC6/SPI_MOSI | bidirectional | Port C6 high-sink I/O (HS) with SPI master out / slave in (SPI_MOSI) as its alternate function. |
| 42 | PC7/SPI_MISO | bidirectional | Port C7 high-sink I/O (HS) with SPI master in / slave out (SPI_MISO) as its alternate function. |
| 43 | PG0/CAN_TX | bidirectional | Port G0 I/O with beCAN transmit (CAN_TX) as its alternate function; the beCAN interface is available on STM8S208xx devices only. |
| 44 | PG1/CAN_RX | bidirectional | Port G1 I/O with beCAN receive (CAN_RX) as its alternate function; the beCAN interface is available on STM8S208xx devices only. |
| 45 | PG2 | bidirectional | Port G2 general-purpose I/O with slow output speed O1. |
| 46 | PG3 | bidirectional | Port G3 general-purpose I/O with slow output speed O1. |
| 47 | PG4 | bidirectional | Port G4 general-purpose I/O with slow output speed O1. |
| 48 | PI0 | bidirectional | Port I0 general-purpose I/O with slow output speed O1. |
| 49 | PG5 | bidirectional | Port G5 general-purpose I/O with slow output speed O1. |
| 50 | PG6 | bidirectional | Port G6 general-purpose I/O with slow output speed O1. |
| 51 | PG7 | bidirectional | Port G7 general-purpose I/O with slow output speed O1. |
| 52 | PE4 | bidirectional | Port E4 general-purpose I/O with slow output speed O1. |
| 53 | PE3/TIM1_BKIN | bidirectional | Port E3 I/O with Timer 1 break input (TIM1_BKIN) as its alternate function. |
| 54 | PE2/I2C_SDA | bidirectional | Port E2 true open-drain I/O (P-buffer and protection diode to VDD not implemented) carrying the I2C data line (I2C_SDA). |
| 55 | PE1/I2C_SCL | bidirectional | Port E1 true open-drain I/O (P-buffer and protection diode to VDD not implemented) carrying the I2C clock line (I2C_SCL). |
| 56 | PE0/CLK_CCO | bidirectional | Port E0 high-sink I/O (HS) with configurable clock output (CLK_CCO) as its alternate function. |
| 57 | PD0/TIM3_CH2 | bidirectional | Port D0 high-sink I/O (HS) with Timer 3 channel 2 (TIM3_CH2) as default alternate function; TIM1_BKIN and CLK_CCO are available through remap options. |
| 58 | PD1/SWIM | bidirectional | Port D1 high-sink I/O (HS) carrying the SWIM data interface; it is in input pull-up during the reset phase and after internal reset release. |
| 59 | PD2/TIM3_CH1 | bidirectional | Port D2 high-sink I/O (HS) with Timer 3 channel 1 (TIM3_CH1) as default alternate function; TIM2_CH3 is available through remap option AFR1. |
| 60 | PD3/TIM2_CH2 | bidirectional | Port D3 high-sink I/O (HS) with Timer 2 channel 2 (TIM2_CH2) as default alternate function; ADC_ETR is available through remap option AFR0. |
| 61 | PD4/TIM2_CH1/BEEP | bidirectional | Port D4 high-sink I/O (HS) with Timer 2 channel 1 (TIM2_CH1) as default alternate function; BEEP output is available through remap option AFR7. |
| 62 | PD5/UART3_TX | bidirectional | Port D5 I/O with UART3 data transmit (UART3_TX) as its alternate function and slow output speed O1. |
| 63 | PD6/UART3_RX | bidirectional | Port D6 I/O with UART3 data receive (UART3_RX) as its alternate function; its default state is controlled by the ROM bootloader and it returns to floating before bootloader exit. |
| 64 | PD7/TLI | bidirectional | Port D7 I/O with top level interrupt (TLI) as its alternate function and slow output speed O1; TIM1_CH4 is available through remap option AFR4 on the 44-pin package only. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (including VDDA and VDDIO) | VDDx - VSS | -0.3 | 6.5 | V | 54 | ||
| Input voltage on true open drain pins (PE1, PE2) | VIN | -0.3 | 6.5 | V | min printed as VSS - 0.3 (VSS reference = 0 V) | 54 | |
| Input voltage on any other pin | VIN | -0.3 | V | min printed as VSS - 0.3; max printed as VDD + 0.3 (not numeric) | 54 | ||
| Variations between different power pins | /VDDx - VDD/ | 50 | mV | 54 | |||
| Variations between all the different ground pins | /VSSx - VSS/ | 50 | mV | 54 | |||
| Total current into VDD power lines (source) | IVDD | 60 | mA | 55 | |||
| Total current out of VSS ground lines (sink) | IVSS | 60 | mA | 55 | |||
| Output current sunk by any I/O and control pin | IIO | 20 | mA | 55 | |||
| Output current sourced by any I/O and control pin | IIO | 20 | mA | 55 | |||
| Total output current sourced (all I/O and control pins), devices with two VDDIO pins | IIO | 200 | mA | devices with two VDDIO pins | 55 | ||
| Total output current sourced (all I/O and control pins), devices with one VDDIO pin | IIO | 100 | mA | devices with one VDDIO pin | 55 | ||
| Total output current sunk (all I/O and control pins), devices with two VSSIO pins | IIO | 160 | mA | devices with two VSSIO pins | 55 | ||
| Total output current sunk (all I/O and control pins), devices with one VSSIO pin | IIO | 80 | mA | devices with one VSSIO pin | 55 | ||
| Injected current on NRST pin | IINJ(PIN) | -4 | 4 | mA | 55 | ||
| Injected current on OSCIN pin | IINJ(PIN) | -4 | 4 | mA | 55 | ||
| Injected current on any other pin | IINJ(PIN) | -4 | 4 | mA | 55 | ||
| Total injected current (sum of all I/O and control pins) | IINJ(PIN) | -20 | 20 | mA | 55 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 55 | ||
| Maximum junction temperature | TJ | 150 | °C | 55 | |||
| Internal CPU clock frequency | fCPU | 0 | 24 | MHz | TA ≤ 105 °C | 56 | |
| Internal CPU clock frequency | fCPU | 0 | 16 | MHz | 56 | ||
| Standard operating voltage | VDD/VDD_IO | 2.95 | 5.5 | V | 56 | ||
| CEXT: capacitance of external capacitor | VCAP | 470 | 3300 | nF | 56 | ||
| ESR of external capacitor | 0.3 | Ω | at 1 MHz | 56 | |||
| ESL of external capacitor | 15 | nH | 56 | ||||
| Power dissipation | PD | 443 | mW | TA = 85 °C for suffix 6; 44, 48, 64 and 80-pin devices, 8 standard ports, 2 high sink and 2 open drain ports simultaneously | 56 | ||
| Ambient temperature for 6 suffix version (maximum power dissipation) | TA | -40 | 85 | °C | suffix 6 | 56 | |
| Junction temperature range, 6 suffix version | TJ | -40 | 105 | °C | suffix 6 | 56 | |
| Power-on reset threshold | VIT+ | 2.65 | 2.8 | 2.95 | V | 57 | |
| Brown-out reset threshold | VIT- | 2.58 | 2.73 | 2.88 | V | 57 | |
| Supply current in run mode, code executed from RAM | IDD(RUN) | 7.3 | mA | VDD = 5 V; fCPU = fMASTER = 24 MHz, TA ≤ 105 °C; HSE user ext. clock (24 MHz) | 58 | ||
| Supply current in run mode, code executed from RAM | IDD(RUN) | 5.8 | mA | VDD = 5 V; fCPU = fMASTER = 16 MHz; HSE user ext. clock (16 MHz) | 58 | ||
| Supply current in run mode, code executed from RAM | IDD(RUN) | 3.4 | mA | VDD = 5 V; fCPU = fMASTER = 16 MHz; HSI RC osc. (16 MHz) | 58 | ||
| Supply current in run mode, code executed from Flash | IDD(RUN) | 18 | mA | VDD = 5 V; fCPU = fMASTER = 24 MHz, TA ≤ 105 °C; HSE user ext. clock (24 MHz) | 58 | ||
| Supply current in run mode, code executed from Flash | IDD(RUN) | 15.2 | mA | VDD = 5 V; fCPU = fMASTER = 16 MHz; HSE user ext. clock (16 MHz) | 58 | ||
| Supply current in run mode, code executed from Flash | IDD(RUN) | 13.2 | mA | VDD = 5 V; fCPU = fMASTER = 16 MHz; HSI RC osc. (16 MHz) | 58 | ||
| Supply current in wait mode | IDD(WFI) | 4.7 | mA | VDD = 5 V; fCPU = fMASTER = 24 MHz, TA ≤ 105 °C; HSE user ext. clock (24 MHz) | 60 | ||
| Supply current in active halt mode, main voltage regulator on, Flash operating mode | IDD(AH) | 260 | µA | VDD = 5 V, TA -40 to 85 °C; MVR on; Flash operating mode; LSI RC oscillator (128 kHz) | 61 | ||
| Supply current in active halt mode, main voltage regulator off, Flash power-down mode | IDD(AH) | 45 | µA | VDD = 5 V, TA -40 to 85 °C; MVR off; Flash power-down mode | 61 | ||
| Supply current in halt mode, Flash power-down, HSI clock after wakeup | IDD(H) | 35 | µA | VDD = 5 V; max at 85 °C | 62 | ||
| Supply current in halt mode, Flash power-down, HSI clock after wakeup | IDD(H) | 100 | µA | VDD = 5 V; max at 125 °C | 62 | ||
| Operating voltage (all modes, execution/write/erase) | VDD | 2.95 | 5.5 | V | fCPU ≤ 24 MHz | 69 | |
| Input low level voltage | VIL | -0.3 | V | VDD = 5 V; max printed as 0.3 x VDD (not numeric) | 70 | ||
| Pull-up resistor | Rpu | 30 | 55 | 80 | kΩ | VDD = 5 V, VIN = VSS | 70 |
| Rise and fall time (10% - 90%), fast I/Os | tR, tF | 20 | ns | Fast I/Os; load = 50 pF | 70 | ||
| Input leakage current, analog and digital | Ilkg | -1 | 1 | µA | VSS ≤ VIN ≤ VDD | 70 | |
| Thermal resistance junction-ambient, LQFP 64 - 10 x 10 mm | JA | 46 | °C/W | JEDEC JESD51-2, 4-layer PCB, natural convection | 108 | ||
| Output low level with 8 pins sunk (standard ports) | VOL | 2 | V | IIO = 10 mA, VDD = 5 V | 72 | ||
| Output low level with 4 pins sunk (standard ports) | VOL | 1 | V | IIO = 4 mA, VDD = 3.3 V | 72 | ||
| Output high level with 8 pins sourced (standard ports) | VOH | 2.8 | V | IIO = 10 mA, VDD = 5 V | 72 | ||
| Output high level with 4 pins sourced (standard ports) | VOH | 2.1 | V | IIO = 4 mA, VDD = 3.3 V | 72 | ||
| Output low level with 2 pins sunk (true open drain ports) | VOL | 1 | V | IIO = 10 mA, VDD = 5 V | 72 | ||
| Output low level with 2 pins sunk (true open drain ports) | VOL | 1.5 | V | IIO = 10 mA, VDD = 3.3 V | 72 | ||
| Output low level with 2 pins sunk (true open drain ports) | VOL | 2 | V | IIO = 20 mA, VDD = 5 V | 72 | ||
| Output low level with 8 pins sunk (high sink ports) | VOL | 0.8 | V | IIO = 10 mA, VDD = 5 V | 72 | ||
| Output low level with 4 pins sunk (high sink ports) | VOL | 1 | V | IIO = 10 mA, VDD = 3.3 V | 72 | ||
| Output low level with 4 pins sunk (high sink ports) | VOL | 1.5 | V | IIO = 20 mA, VDD = 5 V | 72 | ||
| Output high level with 8 pins sourced (high sink ports) | VOH | 4 | V | IIO = 10 mA, VDD = 5 V | 72 | ||
| Output high level with 4 pins sourced (high sink ports) | VOH | 2.1 | V | IIO = 10 mA, VDD = 3.3 V | 72 | ||
| Output high level with 4 pins sourced (high sink ports) | VOH | 3.3 | V | IIO = 20 mA, VDD = 5 V | 72 |
CAD (KiCad official)
- Symbol:
STM8S207R6T6 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm8s207r6t6-etched.step/stm8s207r6t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm8s207r6t6.step/stm8s207r6t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (117 pp, sha256
7adeaa849cf9e22f, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).