main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm8l001j3m3: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stm8l001j3m3-etched.glb Publish 0.1.0 · Ray
stm8l001j3m3-etched.step stm8l001j3m3: factory component page (tier=lcsc) · Ray
stm8l001j3m3-hero.glb stm8l001j3m3: hero GLB from the etched model (keeps the MPN mark) · Ray
stm8l001j3m3-hero.overlay.json Publish 0.1.0 · Ray
stm8l001j3m3.glb Publish 0.1.0 · Ray
stm8l001j3m3.kicad_mod Publish 0.1.0 · Ray
stm8l001j3m3.kicad_sym Publish 0.1.0 · Ray
stm8l001j3m3.lbr Publish 0.1.0 · Ray
stm8l001j3m3.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

STM8L001J3M3

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · SOP-8-150mil

STM8L001J3M3 from STMicroelectronics, in a SOP-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PA0/SWIM/BEEP/IR_TIM bidirectional PA0 is a high sink/source I/O with LED driver capability that serves as SWIM input/output, beep output and timer infrared output, and it is in input pull-up during reset; because pin 1 is shared, its pull-up state also affects PC3 and PC4 and the SWIM pin must be delayed (about 5 s in firmware) before switching to I/O mode.
2 PA2 (shared with PA4/TIM2_BKIN and PA6/COMP_REF) bidirectional PA2 is a high sink/source I/O on the shared pin 2, where PA4 provides the Timer 2 break input and PA6 provides the comparator external reference, and push-pull configuration of PA2 also affects PA4 and PA6.
3 VSS power_in Ground reference pin for the device (all voltages are referred to VSS).
4 VDD power_in Power supply pin; the standard operating voltage is 1.8 V to 3.6 V (VDD = VSS-referenced, absolute maximum external supply -0.3 V to 4.0 V).
5 PD0/TIM3_CH2/COMP1_CH3 (shared with PB3/TIM2_ETR/COMP2_CH2 and PB5/SPI_SCK) bidirectional Pin 5 is a high sink/source I/O that provides Port D0 as Timer 3 channel 2 or comparator 1 channel 3, Port B3 as Timer 2 trigger or comparator 2 channel 2, and Port B5 as SPI clock.
6 PB6/SPI_MOSI bidirectional Port B6 is a high sink/source I/O that serves as the SPI master output / slave input.
7 PB7/SPI_MISO (shared with PC0/I2C_SDA) bidirectional Port B7 is a high sink/source I/O used as SPI master input / slave output, and because pin 7 is shared with PC0/I2C_SDA (true open drain), its VIN maximum is limited by the standard GPIO PB7.
8 PC1/I2C_SCL (shared with PC2/USART_RX) bidirectional Port C1 is a true open-drain I/O used as I2C clock, and because pin 8 is shared with PC2/USART_RX its VIN maximum is limited by the standard GPIO PC2 (USART receive).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOP-8-150mil
Category Embedded Processors & Controllers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage characteristics: external supply voltage VDD-VSS -0.3 4 V 31
Total current into VDD power line (source) IVDD 80 mA 32
Total current out of VSS ground line (sink) IVSS 80 mA 32
Output current sunk by IR_TIM pin IIO 80 mA IR_TIM pin with high sink LED driver capability 32
Output current sunk by any other I/O and control pin IIO 25 mA any other I/O and control pin 32
Output current sourced by any I/Os and control pin IIO -25 mA sourced by any I/Os and control pin 32
Injected current on any pin IINJ(PIN) -5 5 mA 32
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 32
Storage temperature range TSTG -65 150 °C 32
Maximum junction temperature TJ 150 °C 32
Master clock frequency fMASTER 0 16 MHz 1.8 V ≤ VDD < 3.6 V 32
Standard operating voltage VDD 1.8 3.6 V 32
Power dissipation PD 49 mW TA = 125 °C, for suffix 3 devices, SO8N 32
Temperature range TA -40 125 °C 1.8 V ≤ VDD < 3.6 V (3 suffix version) 32
Junction temperature range TJ -40 130 °C -40 °C ≤ TA ≤ 125 °C (3 suffix version) 32
Power on reset threshold VPOR 1.35 1.65 V 33
Power down reset threshold VPDR 1.4 1.6 V 33
VDD rise time rate tVDD 20 1300 µs/V 33
Supply current in Run mode IDD (Run) 0.39 0.6 mA Code executed from RAM, fMASTER = 2 MHz 34
Supply current in Run mode IDD (Run) 0.55 0.7 mA Code executed from RAM, fMASTER = 4 MHz 34
Supply current in Run mode IDD (Run) 0.9 1.2 mA Code executed from RAM, fMASTER = 8 MHz 34
Supply current in Run mode IDD (Run) 1.6 2.1 mA Code executed from RAM, fMASTER = 16 MHz 34
Supply current in Run mode IDD (Run) 0.88 1.8 mA Code executed from Flash, fMASTER = 4 MHz 34
Supply current in Run mode IDD (Run) 1.5 2.5 mA Code executed from Flash, fMASTER = 8 MHz 34
Supply current in Run mode IDD (Run) 2.7 3.5 mA Code executed from Flash, fMASTER = 16 MHz 34
Supply current in Wait mode IDD (Wait) 245 400 µA CPU not clocked, all peripherals off, HSI internal RC osc., fMASTER = 2 MHz 35
Supply current in Wait mode IDD (Wait) 300 450 µA CPU not clocked, all peripherals off, HSI internal RC osc., fMASTER = 4 MHz 35
Supply current in Wait mode IDD (Wait) 380 600 µA CPU not clocked, all peripherals off, HSI internal RC osc., fMASTER = 8 MHz 35
Supply current in Wait mode IDD (Wait) 510 800 µA CPU not clocked, all peripherals off, HSI internal RC osc., fMASTER = 16 MHz 35
Supply current in Halt mode IDD(Halt) 0.35 1.2 μA TA = -40 °C to 25 °C 36
Supply current in Halt mode IDD(Halt) 0.6 1.8 μA TA = 55 °C 36
Supply current in Halt mode IDD(Halt) 1 2.5 μA TA = 85 °C 36
Supply current in Halt mode IDD(Halt) 2.5 6.5 μA TA = 105 °C 36
Supply current in Halt mode IDD(Halt) 5.4 12 μA TA = 125 °C 36
Supply current in Active-halt mode IDD(AH) 0.8 2 μA LSI RC osc. (at 37 kHz), TA = -40 °C to 25 °C 36
Supply current in Active-halt mode IDD(AH) 1 2.5 μA LSI RC osc. (at 37 kHz), TA = 55 °C 36
Supply current in Active-halt mode IDD(AH) 1.4 3.2 μA LSI RC osc. (at 37 kHz), TA = 85 °C 36
Supply current in Active-halt mode IDD(AH) 2.9 7.5 μA LSI RC osc. (at 37 kHz), TA = 105 °C 36
Supply current in Active-halt mode IDD(AH) 5.8 13 μA LSI RC osc. (at 37 kHz), TA = 125 °C 36
Wakeup time from Active-halt mode to Run mode tWU(AH) 4 6.5 μs fCPU = 16 MHz 36
Wakeup time from Halt mode to Run mode tWU(Halt) 4 6.5 μs fCPU = 16 MHz 36
Accuracy of HSI oscillator (factory calibrated) ACCHSI -2.5 2.5 % VDD = 3.0 V, TA = 25 °C 37
Accuracy of HSI oscillator (factory calibrated) ACCHSI -5 % 1.8 V ≤ VDD ≤ 3.6 V, -40 °C ≤ TA ≤ 125 °C 37
HSI oscillator power consumption IDD(HSI) 70 100 µA 37
LSI oscillator frequency fLSI 26 38 56 kHz 39
LSI oscillator frequency drift fdrift(LSI) -12 11 % 0 °C ≤ TA ≤ 85 °C 39
Data retention mode VRM 1.65 V Flash memory Halt mode (or Reset) 39
Erase/write cycles (program memory) NRW 100 cycles See notes (1)(2) 39
Erase/write cycles (data memory) NRW 100 kcycles See notes (1)(3) 39
Data retention (program memory) tRET 20 years after 10k erase/write cycles at TA = +85 °C, TRET = 55 °C 39
Data retention (data memory) tRET 20 years after 10k erase/write cycles at TA = +85 °C, TRET = 55 °C 39
Input leakage current (standard I/Os) Ilkg 50 nA VSS ≤ VIN ≤ VDD 40
Weak pull-up equivalent resistor RPU 30 45 60 kΩ VIN = VSS 40
Output low level voltage for an I/O pin (high sink ports) VOL 0.45 V IIO = +2 mA, VDD = 3.0 V 43
Output low level voltage for an I/O pin (high sink ports) VOL 1.2 V IIO = +10 mA, VDD = 3.0 V 43
Output low level voltage for an I/O pin (true open drain ports) VOL 0.45 V IIO = +3 mA, VDD = 3.0 V 43
Output low level voltage for an I/O pin (PA0 high sink LED driver) VOL 0.9 V IIO = +20 mA, VDD = 2.0 V 43
Thermal resistance junction-ambient ΘJA 102 °C/W SO8N; JEDEC JESD51-2, 4-layer PCB, natural convection 52

CAD (KiCad official)

  • Symbol: STM8L001J3M3
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8-150mil (KiCad packages3D, STEP)
  • 3D model files: stm8l001j3m3-etched.step / stm8l001j3m3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm8l001j3m3.step / stm8l001j3m3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (58 pp, sha256 477d3d595f6db0ec, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF