main
Ray
Publish 0.1.0
e88d59a
STM6824TWY6F
STMicroelectronics · Supervisor And Reset ICs · SOT-23-5
STM6824TWY6F from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{RST} | output | Active low push-pull reset output that pulses low when triggered and stays low whenever VCC is below the reset threshold, and remains low for trec after VCC rises above the threshold or the watchdog triggers a reset. |
| 2 | VSS | power_in | Ground. |
| 3 | RST | output | Active high, push-pull reset output; inverse of the active low reset output. |
| 4 | WDI | input | Watchdog input: reset is asserted if WDI stays high or low for at least 1.6 s, the timer clears on any WDI edge, and the watchdog is disabled if WDI is left unconnected or connected to a tristate buffer output. |
| 5 | VCC | power_in | Supply voltage monitored against the reset threshold; operating range 1.2 to 5.5 V (1.0 V min. for TA = 0 to +85 °C) and absolute maximum 7.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | VCC | 1.2 | 5.5 | V | 21 | ||
| VCC supply current (MR and WDI unconnected) | ICC | 4 | 12 | µA | T/S/R/Z/Y (VCC < 3.6 V); MR and WDI unconnected | 21 | |
| Input leakage current | ILI | -1 | 1 | µA | 0 V = VIN = VCC | 21 | |
| Input leakage current (WDI) | ILI | 120 | 160 | µA | WDI = VCC, time average | 21 | |
| Input leakage current (WDI) | ILI | -20 | -15 | µA | WDI = GND, time average | 21 | |
| Output low voltage (RST; push-pull or open drain) | VOL | 0.3 | V | VCC ≥ 1.0 V, ISINK = 50 µA, Reset asserted | 21 | ||
| Output low voltage (RST; push-pull or open drain) | VOL | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA, Reset asserted | 21 | ||
| Output low voltage (RST; push-pull only) | VOL | 0.3 | V | VCC ≥ 2.7 V, ISINK = 1.2 mA, Reset not asserted | 21 | ||
| Output low voltage (RST; push-pull only) | VOL | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA, Reset not asserted | 21 | ||
| Reset threshold | VRST | 3.04 | 3.08 | 3.11 | V | STM6xxxT, 25 °C | 22 |
| Reset threshold | VRST | 3 | 3.15 | V | STM6xxxT, -40 to 85 °C | 22 | |
| Reset pulse width (blank suffix) | trec | 140 | 200 | 280 | ms | 22 | |
| Watchdog timeout period | tWD | 1.12 | 1.6 | 2.24 | s | 23 | |
| WDI pulse width | 50 | ns | VCC ≥ 3.0 V | 23 | |||
| WDI pulse width (tWD min. footnote) | 100 | ns | VCC < 3.0 V | 23 | |||
| Storage temperature (VCC off) | TSTG | -55 | 150 | °C | VCC off | 18 | |
| Lead solder temperature for 10 seconds | TSLD | 260 | °C | Reflow at peak temperature of 260 °C (total thermal budget not to exceed 245 °C for greater than 30 seconds) | 18 | ||
| Supply voltage | VCC | -0.3 | 7 | V | 18 | ||
| Output current | IO | 20 | mA | 18 | |||
| Power dissipation | PD | 320 | mW | 18 | |||
| Supply voltage | VCC | 1 | 5.5 | V | 19 | ||
| Ambient operating temperature | TA | -40 | 85 | °C | 19 | ||
| Input rise and fall times | 5 | ns | 19 |
CAD (KiCad official)
- Symbol:
STM6824TWY6F - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm6824twy6f-etched.step/stm6824twy6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm6824twy6f.step/stm6824twy6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (31 pp, sha256
ba50f0fd6706f830, retrieved 2026-11-10, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM6824TWY6F
**STMicroelectronics** · Supervisor And Reset ICs · SOT-23-5
STM6824TWY6F from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{RST} | output | Active low push-pull reset output that pulses low when triggered and stays low whenever VCC is below the reset threshold, and remains low for trec after VCC rises above the threshold or the watchdog triggers a reset. |
| 2 | VSS | power_in | Ground. |
| 3 | RST | output | Active high, push-pull reset output; inverse of the active low reset output. |
| 4 | WDI | input | Watchdog input: reset is asserted if WDI stays high or low for at least 1.6 s, the timer clears on any WDI edge, and the watchdog is disabled if WDI is left unconnected or connected to a tristate buffer output. |
| 5 | VCC | power_in | Supply voltage monitored against the reset threshold; operating range 1.2 to 5.5 V (1.0 V min. for TA = 0 to +85 °C) and absolute maximum 7.0 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | VCC | 1.2 | | 5.5 | V | | 21 |
| VCC supply current (MR and WDI unconnected) | ICC | | 4 | 12 | µA | T/S/R/Z/Y (VCC < 3.6 V); MR and WDI unconnected | 21 |
| Input leakage current | ILI | -1 | | 1 | µA | 0 V = VIN = VCC | 21 |
| Input leakage current (WDI) | ILI | | 120 | 160 | µA | WDI = VCC, time average | 21 |
| Input leakage current (WDI) | ILI | | -20 | -15 | µA | WDI = GND, time average | 21 |
| Output low voltage (RST; push-pull or open drain) | VOL | | | 0.3 | V | VCC ≥ 1.0 V, ISINK = 50 µA, Reset asserted | 21 |
| Output low voltage (RST; push-pull or open drain) | VOL | | | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA, Reset asserted | 21 |
| Output low voltage (RST; push-pull only) | VOL | | | 0.3 | V | VCC ≥ 2.7 V, ISINK = 1.2 mA, Reset not asserted | 21 |
| Output low voltage (RST; push-pull only) | VOL | | | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA, Reset not asserted | 21 |
| Reset threshold | VRST | 3.04 | 3.08 | 3.11 | V | STM6xxxT, 25 °C | 22 |
| Reset threshold | VRST | 3 | | 3.15 | V | STM6xxxT, -40 to 85 °C | 22 |
| Reset pulse width (blank suffix) | trec | 140 | 200 | 280 | ms | | 22 |
| Watchdog timeout period | tWD | 1.12 | 1.6 | 2.24 | s | | 23 |
| WDI pulse width | | 50 | | | ns | VCC ≥ 3.0 V | 23 |
| WDI pulse width (tWD min. footnote) | | 100 | | | ns | VCC < 3.0 V | 23 |
| Storage temperature (VCC off) | TSTG | -55 | | 150 | °C | VCC off | 18 |
| Lead solder temperature for 10 seconds | TSLD | | | 260 | °C | Reflow at peak temperature of 260 °C (total thermal budget not to exceed 245 °C for greater than 30 seconds) | 18 |
| Supply voltage | VCC | -0.3 | | 7 | V | | 18 |
| Output current | IO | | | 20 | mA | | 18 |
| Power dissipation | PD | | | 320 | mW | | 18 |
| Supply voltage | VCC | 1 | | 5.5 | V | | 19 |
| Ambient operating temperature | TA | -40 | | 85 | °C | | 19 |
| Input rise and fall times | | | | 5 | ns | | 19 |
## CAD (KiCad official)
- Symbol: `STM6824TWY6F`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `stm6824twy6f-etched.step` / `stm6824twy6f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm6824twy6f.step` / `stm6824twy6f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588938960383463424) (31 pp, sha256 `ba50f0fd6706f830`, retrieved 2026-11-10, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm6824twy6f-datasheet.pdf)