main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm6824twy6f: .lbr and symbol viewer from adom-lbr 2.47.10 (primes, overbars) · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
stm6824twy6f-etched.glb Publish 0.1.0 · Ray
stm6824twy6f-etched.step stm6824twy6f: factory component page (tier=lcsc) · Ray
stm6824twy6f-hero.glb stm6824twy6f: hero GLB from the etched model (keeps the MPN mark) · Ray
stm6824twy6f-hero.overlay.json Publish 0.1.0 · Ray
stm6824twy6f.glb Publish 0.1.0 · Ray
stm6824twy6f.kicad_mod Publish 0.1.0 · Ray
stm6824twy6f.kicad_sym Publish 0.1.0 · Ray
stm6824twy6f.lbr Publish 0.1.0 · Ray
stm6824twy6f.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray

STM6824TWY6F

STMicroelectronics · Supervisor And Reset ICs · SOT-23-5

STM6824TWY6F from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ~{RST} output Active low push-pull reset output that pulses low when triggered and stays low whenever VCC is below the reset threshold, and remains low for trec after VCC rises above the threshold or the watchdog triggers a reset.
2 VSS power_in Ground.
3 RST output Active high, push-pull reset output; inverse of the active low reset output.
4 WDI input Watchdog input: reset is asserted if WDI stays high or low for at least 1.6 s, the timer clears on any WDI edge, and the watchdog is disabled if WDI is left unconnected or connected to a tristate buffer output.
5 VCC power_in Supply voltage monitored against the reset threshold; operating range 1.2 to 5.5 V (1.0 V min. for TA = 0 to +85 °C) and absolute maximum 7.0 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage VCC 1.2 5.5 V 21
VCC supply current (MR and WDI unconnected) ICC 4 12 µA T/S/R/Z/Y (VCC < 3.6 V); MR and WDI unconnected 21
Input leakage current ILI -1 1 µA 0 V = VIN = VCC 21
Input leakage current (WDI) ILI 120 160 µA WDI = VCC, time average 21
Input leakage current (WDI) ILI -20 -15 µA WDI = GND, time average 21
Output low voltage (RST; push-pull or open drain) VOL 0.3 V VCC ≥ 1.0 V, ISINK = 50 µA, Reset asserted 21
Output low voltage (RST; push-pull or open drain) VOL 0.4 V VCC ≥ 4.5 V, ISINK = 3.2 mA, Reset asserted 21
Output low voltage (RST; push-pull only) VOL 0.3 V VCC ≥ 2.7 V, ISINK = 1.2 mA, Reset not asserted 21
Output low voltage (RST; push-pull only) VOL 0.4 V VCC ≥ 4.5 V, ISINK = 3.2 mA, Reset not asserted 21
Reset threshold VRST 3.04 3.08 3.11 V STM6xxxT, 25 °C 22
Reset threshold VRST 3 3.15 V STM6xxxT, -40 to 85 °C 22
Reset pulse width (blank suffix) trec 140 200 280 ms 22
Watchdog timeout period tWD 1.12 1.6 2.24 s 23
WDI pulse width 50 ns VCC ≥ 3.0 V 23
WDI pulse width (tWD min. footnote) 100 ns VCC < 3.0 V 23
Storage temperature (VCC off) TSTG -55 150 °C VCC off 18
Lead solder temperature for 10 seconds TSLD 260 °C Reflow at peak temperature of 260 °C (total thermal budget not to exceed 245 °C for greater than 30 seconds) 18
Supply voltage VCC -0.3 7 V 18
Output current IO 20 mA 18
Power dissipation PD 320 mW 18
Supply voltage VCC 1 5.5 V 19
Ambient operating temperature TA -40 85 °C 19
Input rise and fall times 5 ns 19

CAD (KiCad official)

  • Symbol: STM6824TWY6F
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm6824twy6f-etched.step / stm6824twy6f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm6824twy6f.step / stm6824twy6f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (31 pp, sha256 ba50f0fd6706f830, retrieved 2026-11-10, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF