component
STM6710KWB6F
Public Made by Adomby adom
STMicroelectronics Supervisor And Reset ICs, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
STM6710KWB6F
STMicroelectronics · Supervisor And Reset ICs · SOT-23-6
STM6710KWB6F from STMicroelectronics, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V1IN | input | Input voltage 1 monitoring pin with factory or adjustable threshold depending on variant; unused in STM6710KWB6F - connect to V2IN with pull-up resistor per Section 4.3. |
| 2 | V2IN | power_in | Power supply and input voltage 2 (1.0-5.5V operating range); monitored at 1.8V threshold with 10% tolerance in this variant; provides weak 10µA internal pull-up to RESET output. |
| 3 | V3IN | input | Input voltage 3 monitoring pin with factory or adjustable threshold depending on variant; unused in STM6710KWB6F - connect to V2IN with pull-up resistor per Section 4.3. |
| 4 | V4IN | input | Adjustable input voltage 4 monitoring pin with nominal 0.620V reference voltage, ±1.5% accuracy and 0.3% hysteresis; configure threshold via external resistor divider network per Section 4.2 and Figure 7. |
| 5 | GND | power_in | Ground reference and VSS connection for power supply and analog circuits. |
| 6 | RESET | tri_state | Active-low open-drain RESET output with weak 10µA internal pull-up to V2IN; asserts low when any monitored input falls below threshold; remains low for 200ms typical recovery period (STM6710); valid while V1IN or V2IN exceeds 1V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
STM6710KWB6F - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
stm6710kwb6f-etched.step/stm6710kwb6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm6710kwb6f.step/stm6710kwb6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (20 pp, sha256
d1d10e694ade9647, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM6710KWB6F
**STMicroelectronics** · Supervisor And Reset ICs · SOT-23-6
STM6710KWB6F from STMicroelectronics, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V1IN | input | Input voltage 1 monitoring pin with factory or adjustable threshold depending on variant; unused in STM6710KWB6F - connect to V2IN with pull-up resistor per Section 4.3. |
| 2 | V2IN | power_in | Power supply and input voltage 2 (1.0-5.5V operating range); monitored at 1.8V threshold with 10% tolerance in this variant; provides weak 10µA internal pull-up to RESET output. |
| 3 | V3IN | input | Input voltage 3 monitoring pin with factory or adjustable threshold depending on variant; unused in STM6710KWB6F - connect to V2IN with pull-up resistor per Section 4.3. |
| 4 | V4IN | input | Adjustable input voltage 4 monitoring pin with nominal 0.620V reference voltage, ±1.5% accuracy and 0.3% hysteresis; configure threshold via external resistor divider network per Section 4.2 and Figure 7. |
| 5 | GND | power_in | Ground reference and VSS connection for power supply and analog circuits. |
| 6 | RESET | tri_state | Active-low open-drain RESET output with weak 10µA internal pull-up to V2IN; asserts low when any monitored input falls below threshold; remains low for 200ms typical recovery period (STM6710); valid while V1IN or V2IN exceeds 1V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## CAD (KiCad official)
- Symbol: `STM6710KWB6F`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `stm6710kwb6f-etched.step` / `stm6710kwb6f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm6710kwb6f.step` / `stm6710kwb6f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588953461781614592) (20 pp, sha256 `d1d10e694ade9647`, retrieved 2026-10-07, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm6710kwb6f-datasheet.pdf)