component
STM6710KWB6F
Public Made by Adomby adom
STMicroelectronics Supervisor And Reset ICs, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+42@@ -0,0 +1,42 @@+# STM6710KWB6F++**STMicroelectronics** · Supervisor And Reset ICs · SOT-23-6++STM6710KWB6F from STMicroelectronics, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | V1IN | input | Input voltage 1 monitoring pin with factory or adjustable threshold depending on variant; unused in STM6710KWB6F - connect to V2IN with pull-up resistor per Section 4.3. |+| 2 | V2IN | power_in | Power supply and input voltage 2 (1.0-5.5V operating range); monitored at 1.8V threshold with 10% tolerance in this variant; provides weak 10µA internal pull-up to RESET output. |+| 3 | V3IN | input | Input voltage 3 monitoring pin with factory or adjustable threshold depending on variant; unused in STM6710KWB6F - connect to V2IN with pull-up resistor per Section 4.3. |+| 4 | V4IN | input | Adjustable input voltage 4 monitoring pin with nominal 0.620V reference voltage, ±1.5% accuracy and 0.3% hysteresis; configure threshold via external resistor divider network per Section 4.2 and Figure 7. |+| 5 | GND | power_in | Ground reference and VSS connection for power supply and analog circuits. |+| 6 | RESET | tri_state | Active-low open-drain RESET output with weak 10µA internal pull-up to V2IN; asserts low when any monitored input falls below threshold; remains low for 200ms typical recovery period (STM6710); valid while V1IN or V2IN exceeds 1V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOT-23-6 |+| Category | Power Management (PMIC) |+| Pins | 6 |++## CAD (KiCad official)++- Symbol: `STM6710KWB6F`+- Footprint: `Package_TO_SOT_SMD:SOT-23-6`+- 3D model: SOT-23-6 (KiCad packages3D, STEP)+- 3D model files: `stm6710kwb6f-etched.step` / `stm6710kwb6f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm6710kwb6f.step` / `stm6710kwb6f.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588953461781614592) (20 pp, sha256 `d1d10e694ade9647`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm6710kwb6f-datasheet.pdf)
page.jsonadded+188@@ -0,0 +1,188 @@+{+ "slug": "stm6710kwb6f",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Supervisor And Reset ICs, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "stm6710kwb6f",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm6710kwb6f.kicad_sym",+ "stm6710kwb6f.kicad_mod",+ "stm6710kwb6f.glb",+ "stm6710kwb6f.step",+ "stm6710kwb6f.lbr",+ "docs/hero.png",+ "docs/stm6710kwb6f-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm6710kwb6f-hero.glb",+ "stm6710kwb6f-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM6710KWB6F",+ "manufacturer": "STMicroelectronics",+ "package": "SOT-23-6",+ "pin_count": 6,+ "category": "Power Management (PMIC)",+ "subcategory": "Supervisor And Reset ICs",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588953461781614592",+ "parts": {+ "symbol": "stm6710kwb6f.kicad_sym",+ "footprint": "stm6710kwb6f.kicad_mod",+ "model_3d": "stm6710kwb6f-hero.glb",+ "model_3d_plain": "stm6710kwb6f.glb",+ "model_3d_step": "stm6710kwb6f-etched.step",+ "model_3d_step_plain": "stm6710kwb6f.step",+ "lbr": "stm6710kwb6f.lbr"+ },+ "distributor_links": {+ "lcsc": "C2068172",+ "digikey": "497-10436-2-ND",+ "mouser": "511-STM6710KWB6F"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T07:50:06Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-10436-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-STM6710KWB6F",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "V1IN",+ "type": "input",+ "description": "Input voltage 1 monitoring pin with factory or adjustable threshold depending on variant; unused in STM6710KWB6F - connect to V2IN with pull-up resistor per Section 4.3."+ },+ {+ "number": "2",+ "name": "V2IN",+ "type": "power_in",+ "description": "Power supply and input voltage 2 (1.0-5.5V operating range); monitored at 1.8V threshold with 10% tolerance in this variant; provides weak 10µA internal pull-up to RESET output."+ },+ {+ "number": "3",+ "name": "V3IN",+ "type": "input",+ "description": "Input voltage 3 monitoring pin with factory or adjustable threshold depending on variant; unused in STM6710KWB6F - connect to V2IN with pull-up resistor per Section 4.3."+ },+ {+ "number": "4",+ "name": "V4IN",+ "type": "input",+ "description": "Adjustable input voltage 4 monitoring pin with nominal 0.620V reference voltage, ±1.5% accuracy and 0.3% hysteresis; configure threshold via external resistor divider network per Section 4.2 and Figure 7."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference and VSS connection for power supply and analog circuits."+ },+ {+ "number": "6",+ "name": "RESET",+ "type": "tri_state",+ "description": "Active-low open-drain RESET output with weak 10µA internal pull-up to V2IN; asserts low when any monitored input falls below threshold; remains low for 200ms typical recovery period (STM6710); valid while V1IN or V2IN exceeds 1V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: V1IN and V3IN are not in the monitored voltage set for STM6710KWB6F variant (per Table 9). Datasheet; V4IN in STM6710KWB6F is configured as adjustable threshold (per Table 9). Final reset threshold volt"+ ],+ "pages_sent": 20,+ "cost_usd": 0.1302,+ "at": "2026-10-07T07:49:52"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588953461781614592",+ "pages": 20,+ "sha256": "d1d10e694ade9647",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 6,+ "described": 6,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm6710kwb6f.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm6710kwb6f-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "8d44a85e0ab30254aebd24c8e6b56f11ebb7aaf3a99de88eaf011c01dcfac83a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}